USB2.0 Header 4-Port Hub 'HUB-07'
Since there are four 2x5 pin headers on two circuit boards, the number of USB 2.0 ports increases from 2 to 8!
The "HUB-07" is a hub that distributes a USB 2x5 pin header on the motherboard into four outputs. It is convenient for building environments with many internal USB 2.0 devices on motherboards that have few USB 2.0 headers. It is recommended for situations where multiple USB 2.0 headers are needed, controlled by LED. The back of the board has pads with double-sided tape attached, allowing it to be installed in any location inside the PC case. The LED on the board lights up while the hub function is in operation. 【Specifications (partial)】 ■ Board type, for installation inside PC cases ■ Supported standards: USB 2.0/1.1 ■ High-Speed (480Mbps) compatible (theoretical value) ■ USB bus power only ■ USB ports: 8 (2x5 pin headers for USB 2.0 x4) ■ LED: Red (while hub function is in operation) *For more details, please download the PDF or feel free to contact us.
basic information
【Other Specifications】 ■Connector Shape ・Motherboard Side: 2.54mm Pitch 4-Pin Male ・Device Side: 2x5 Pins Male x4 ■Supported OS: Windows 10/11 (32/64bit) ■Size: W41×D41×H13mm (including mounted components, per circuit board) ■Included Accessories: Connection Cable (2x5 Pins Female ⇔ 2.54mm Pitch 4-Pin Female x2) (approximately 26cm) *For more details, please download the PDF or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please download the PDF or feel free to contact us.
catalog（1）
Download All Catalogs
Recommended products
Distributors
Our company handles front and rear I/O, drive accessories, internal power cables, and cooling fans. Please feel free to contact us if you have any requests.