エイ・ジェイ・テックス Official site

Prevents the attachment of forklift tire marks. No need to change tires, low cost. Significantly reduces the burden of floor cleaning.

【Installation Method】 1. Thoroughly wipe off any dirt from the tires. 2. While moving the front wheels forward and the rear wheels backward, attach the tire mark prevention cover to the tires using double-sided tape. 3. Repeat moving forward and backward to help the cover conform to the tires. 【Ordering Method】 1. Measure the 'tread area*' and 'diameter (outer diameter)' of the tires, and contact us with the 'required quantity.' * Tread area = the part that contacts the floor while in motion. Please refer to the image at the top of this page labeled "Please measure the following two locations." * If the tire sizes differ between the front and rear wheels, please measure all tires. 2. We will provide you with a quote and delivery date. 【Notes】 ● Please use on flat indoor surfaces (we do not recommend use on uneven floors, road surfaces, or areas that may get wet). ● Depending on the surface environment, the power may slightly decrease when the cover is installed. ● In rare cases, the floor may get scratched depending on the material of the floor. ● Please refrain from using on slopes after attaching the cover. ● If you notice wear on the cover or peeling of the double-sided tape, it is time for replacement.

Solve tire mark problems all at once! 【For forklifts, aerial work platforms, and other indoor work vehicles】

【Installation Method】 1. Wipe off any dirt from the tires thoroughly. 2. While moving the front wheel forward and the rear wheel backward, attach the tire mark prevention cover to the tire using double-sided tape. 3. Repeat moving forward and backward to help the cover conform to the tire. 【Ordering Method】 1. Measure the 'tread area*' and 'diameter (outer diameter)' of the tire, and contact us with the 'required quantity.' * Tread area = the part that comes into contact with the floor during operation. Please refer to the image at the top of this page labeled "Please measure the following two locations." * If the tire sizes differ between the front and rear wheels, please measure all tires. 2. We will provide you with a quote and delivery date. 【Notes】 ● Please use it on a flat indoor floor (we do not recommend using it on uneven surfaces or areas that may get wet). ● Depending on the surface environment, the power may slightly decrease due to the installation of the cover. ● In rare cases, the floor may get scratched depending on the material of the floor. ● Please refrain from using it on slopes after attaching the cover. ● If you notice wear on the cover or peeling of the double-sided tape, it is time for replacement.

It led to a reduction in working hours and an increase in efficiency!

[Specifications]: We will create it to match the size of your tires. Please provide the "width of the tread" and "diameter" of the tire. Feel free to request a quote! [Material]: Cover body: Polyester Double-sided tape: (Base material) Foam butyl rubber, (Adhesive) Acrylic adhesive, (Release paper) Paper [Installation Method] 1. Thoroughly wipe off any dirt from the tire. 2. While moving forward for the front wheels and backward for the rear wheels, attach the tire mark prevention cover to the tire using double-sided tape. 3. Repeat moving forward and backward to ensure the cover fits well with the tire. [Ordering Method] 1. Measure the "tread part" and "diameter (outer diameter)" of the tire, and contact us with the "required quantity." * Tread part = The part that comes into contact with the floor while driving. Please refer to the image at the top of this page, "Please measure the following two locations." * If the tire sizes differ between the front and rear wheels, please measure all tires. 2. We will inform you of the quote and delivery date.