Notice of Participation in 'Mechatrotech Japan 2025' from Wednesday, October 22 to Saturday, October 25, 2025

アルプスツール

Alps Tool Co., Ltd. will be exhibiting at "Mechatrotech Japan 2025," which will be held at Port Messe Nagoya. This exhibition is a machine tool trade fair that takes place in the fall of odd-numbered years at Port Messe Nagoya in the city of Nagoya. As the largest machine tool exhibition in odd-numbered years, the 2023 event, which was the 19th edition, featured 490 companies and organizations (2,101 booths) and attracted 77,225 visitors. We sincerely look forward to your visit.

Date and time Wednesday, Oct 22, 2025 ～ Saturday, Oct 25, 2025
10:00 AM ～ 05:00 PM
The last day, the 25th (Saturday), is until 16:00.
Capital ■Venue: Port Messe Nagoya Hall 1, Hall 2, Hall 3 ■Address: 2-2 Kinjo-futo, Minato Ward, Nagoya City, 455-0848 ■Nearest Station ・Hall 1: About a 3-minute walk from Kinjo-futo Station on the Aonami Line ・Hall 2/Hall 3: About a 7-minute walk from Kinjo-futo Station on the Aonami Line
Entry fee Charge 1,000 yen per person, 500 yen per person for groups of 10 or more (including tax). However, pre-registered individuals, international visitors, and students are free.

Related product information

25T collet holder
Collet holder for small MC and DC, used in conjunction with Colette Prustad!

For more details, please download the PDF or feel free to contact us.
AR/OH coolant collet
Center-through high-pressure coolant compatible! Achieves stable high precision with no packing in the collet.

【Lineup】 ■AR11OH ■AR16OH ■AR20OH ■AR25OH ■AR32OH ■AR40OH *For more details, please download the PDF or feel free to contact us.
AR/C coolant collet
Effective for semi-dry processing! We also produce oil-based coolant compatible with water-soluble coolants.

【Lineup】 ■AR11C-d ■AR16C-d ■AR20C-d ■AR25C-d ■AR32C-d *For more details, please download the PDF or feel free to contact us.
AR/GB Tap Collet
For synchro tap processing! A tap-specific collet with a square hole stop attached.

【Lineup】 ■AR16GB ■AR20GB ■AR25GB ■AR32GB ■AR40GB *For more details, please download the PDF or feel free to contact us.
AR/GH coolant tap collet
Coolant collet for synchro tap processing! It improves tool life.

【Lineup】 ■AR16GH ■AR20GH ■AR25GH ■AR32GH ■AR40GH *For more details, please download the PDF or feel free to contact us.
Face Milling Arbor Type A
JIS B 4133 compatible with face milling! Widely usable from facing to rough machining.

For more details, please download the PDF or feel free to contact us.
Face Milling Arbor Type B
Sandvik T-MAX face mills, compatible with shoulder face mills!

For more details, please download the PDF or feel free to contact us.
Side cutter arbor
Supports processing with a rich variety of options! Standard accessories include cutter clamp nuts and collars.

For more details, please download the PDF or feel free to contact us.
Mall Steeper Holder Type A
For mall step pad drills! Lineup includes BT30-MTA1-50/65 and others.

For more details, please download the PDF or feel free to contact us.
MT. Drill Socket
For converting mall taper sizes! Used in combination with the MTA type mall taper holder.

For more details, please download the PDF or feel free to contact us.
Jacob's taper holder
Easy drill chucking! Introducing a holder for attaching a drill chuck.

For more details, please download the PDF or feel free to contact us.
Drill chuck
Introducing ALBRECHT products designed for use with Jacob's taper holders!

For more details, please download the PDF or feel free to contact us.
15T collet holder
Small MC and DC collet holder! Compatible with highly versatile 16° taper collets.

For more details, please download the PDF or feel free to contact us.
S20T Collet Holder
Special holders are also manufactured! Used for various applications such as drilling, reaming, end milling, and synchronized tapping.

For more details, please download the PDF or feel free to contact us.
Side Lock Holder Type A/S
Supporting processing with reliable performance! We also introduce custom-made products specifically for end mills.

For more details, please download the PDF or feel free to contact us.
Short Nose Collet Holder mm Specification
Short nose with minimized protrusion length for use in chucking lathes, automatic lathes, etc.!

For more details, please download the PDF or feel free to contact us.
Adjustable height collet holder
The deterioration of blade table precision can be compensated with the holder! It is possible to adjust the height deviation within a range of ±0.3mm.

【Center Adjustment Collet Holder Features】 ■ Allows adjustment of center misalignment within a range of ±0.1mm ■ Can enhance tool life by compensating for center misalignment due to tool wear, carbide drills, reamers, etc. ■ Holder can compensate for deterioration in tool holder accuracy *For more details, please download the PDF or feel free to contact us.
Collet holder with flange
Suitable for turret lathes and similar machines, a holder with a flat surface on the shank, ideal for NC lathe holders.

For more details, please download the PDF or feel free to contact us.
AR Colette Coolant Tap Collet Type GH
Compatible with 20MPa! A square hole has been machined at the rear of the AR collet for tap stop.

For more details, please download the PDF or feel free to contact us.
AR Collet Tap Collet Type GB
We offer a wide range of tap collets from Alps Tool!

For more details, please download the PDF or feel free to contact us.
AR Colette Coolant Through Type C
It demonstrates its power in deep hole machining of small diameters where oil hole drills cannot be used!

For more details, please download the PDF or feel free to contact us.
AR Colette Coolant Through OH Type
Liquid-tight collet! Complete sealing with a short slit that stops just before the tapered section.

For more details, please download the PDF or feel free to contact us.
AR Colette Standard Type
We provide products with reliable technology, high precision, and excellent durability that receive high praise!

【Response Level】 ■AAA Level 3μm ■AA Level 5μm ■A Level 8μm *For more details, please download the PDF or feel free to contact us.
What is the NICE MILL SERIES?
A series with a variety of products such as collet holders, AR collets, and nuts, tailored to meet your needs!

[CNC Lathe Tool Holder Features] ■ Various line-up including center adjustment type, double-ended holders, and tap holders with telescopic function ■ Nut for collet chuck is included as standard ■ Small diameter boring holders available ■ Custom sizes also available *For more details, please download the PDF or feel free to contact us.
Tap holder axial float
By allowing the axis to float, it absorbs screw pitch errors! Available in single and double options.

For more details, please download the PDF or feel free to contact us.
Short Nose Collet Holder Double-Ended Type
For automatic lathes and similar machines! Front and back processing can be utilized with a single tool.

For more details, please download the PDF or feel free to contact us.
AR Colette Organizer Stand
The capacity is 45, 32, 18! A compact aluminum organizer stand.

For more details, please download the PDF or feel free to contact us.
Dice holder
Use in combination with the main unit of the tap holder SST□□-ECH7 or with machines equipped with a synchronization function!

For more details, please download the PDF or feel free to contact us.
Jacob's taper holder
Please use it instead of the keyless drill chuck (130-J6)!

For more details, please download the PDF or feel free to contact us.
Colette holder with a round shank without flat surfaces.
Interference avoidance! Introducing round shank holders used for machining centers and more.

For more details, please download the PDF or feel free to contact us.
Tool Change Head AR Type
Work interference / collet size change / easy adjustment of protrusion length!

For more details, please download the PDF or feel free to contact us.
Bowling bar holder
To secure the boring bit with a side lock, the tip position is stabilized!

For more details, please download the PDF or feel free to contact us.
Coolant-through collet holder with piping screw.
Introducing the Alps Tool collet holder with mm/Inch specifications!

For more details, please download the PDF or feel free to contact us.
Short Nose Collet Holder Inch Specification
Introducing a small and short holder suitable for Swiss-type and knife-edge NC lathes!

For more details, please download the PDF or feel free to contact us.
MC TOOLING SYSTEM Catalog
A rich lineup of milling chucks, collets, collet holders, and more!

【Other Listings (Partial)】 ■AR/OH Coolant Collet ■AR/C Coolant Collet ■AR/GB Tap Collet ■AR/GH Coolant Tap Collet ■Milling Arbor *For more details, please download the PDF or feel free to contact us.
HSK Touring System Catalog
A rich lineup of milling chucks, straight collets, collet holders, and more!

【Other Listings (Partial)】 ■ AR/OH Coolant Collet ■ AR/C Coolant Collet ■ AR/GB Tap Collet ■ AR/GH Coolant Tap Collet ■ Face Mill Arbor *For more details, please download the PDF or feel free to contact us.
NICE MILL SERIES Product Catalog
A series with a variety of products such as collet holders, AR collets, and nuts, tailored to meet your needs!

【Other Listings (Partial)】 ■Collet Holder ■Height Adjustable Holder ■Core Adjustable Holder ■Short Nose Holder ■Double-Ended Collet Holder *For more details, please download the PDF or feel free to contact us.
Thermo Grip Catalog
Utilizing the difference in thermal expansion rates between the holder and the cutting tool, the tool is chucked with high precision and gripping force!

【Other Listings (Partial)】 ■ISGS3430TLK4A1-11-WS ■ISG3410WK4-11-WS ■FKS3400MZ ■Tool Set Parts / Extraction Tools ■Power Supply Parts / Air Parts *For more details, please download the PDF or feel free to contact us.
Standard Collet Chuck "Ass'y"
Colette uses our standard AS type! Common use across the series is possible.

【Options】 ■Colette ■Dust-proof pad ■Chip cover *For more details, please download the PDF or feel free to contact us.
Dry Feeder "Z-16"
Material bending is less than 0.5mm per meter! (MAS404 standard, tolerance grade B or higher)

【Other Specifications (Partial)】 ■ Material Length ・2.5m Specification: 1,000 to 2,545mm ・3.0m Specification: 1,000 to 3,045mm ・4.0m Specification: 1,000 to 4,045mm ■ Material Storage Capacity ・φ4mm: 4 pieces ・φ16mm: 11 pieces *For more details, please download the PDF or feel free to contact us.
VDI TOOL HOLDERS Catalog
Featuring rectangular blanks, round blanks, and B1 type tool holders!

【Other Listings (Partial)】 ■B4 Type Tool Holder ■B5 Type Tool Holder ■B6 Type Tool Holder ■B7 Type Tool Holder ■B8 Type Tool Holder *For more details, please download the PDF or feel free to contact us.
Shaft Work Discharge Device 'SWP-RB65'
Multiple output work data can be saved (5 points as standard)! It can be increased with optional support.

【Other Specifications】 ■ Voltage: AC200V ■ Power: 3-phase 1.5kVA ■ Frequency: 50Hz/60Hz ■ Air Reduction ・ Pressure: 0.5–0.7MPa ・ Flow Rate: 100L/min (ANR) *For more details, please download the PDF or feel free to contact us.
Material Stock Lifter "SL80"
Fast processing cycle products, large stock of materials! Safe material supply.

【Specifications (Partial)】 ■ Long Material Lifter - Material Diameter: Φ8 to Φ65mm - Equipment Weight: 850kg ■ Short Material Lifter - Material Diameter: Φ8 to Φ80mm, Φ80 to Φ110mm (Optional) - Equipment Weight: 600kg *For more details, please download the PDF or feel free to contact us.
Material Stock Lifter "SL26"
Since the material supply machine has independent control, it can be added to existing equipment!

【Other Specifications (Partial)】 ■ Control Circuit: PLC Control DC24V ■ Air Source ・ Pressure: 0.5 to 0.7MPa ・ Flow Rate: 230L/min (ANR) ■ Material Bending: Less than 0.5mm per meter (MAS404 standard, tolerance Class B or higher) *For more details, please download the PDF or feel free to contact us.
AQT System <For Kushi Blade Type NC Lathe>
Compact and lightweight with excellent repeatability, featuring a quick change system with fine adjustment for temporary tightening!

For more details, please download the PDF or feel free to contact us.
Alps Captor Adapter Catalog
The multi-tasking machine (MTM), of course, is a suitable two-sided restrained coupling for CNC lathes and machining centers!

【Other Listings (Partial)】 ■Collet Holder (EXH Type) ■Collet Holder (ECH Type) ■Taper ■AR Chuck Collet (Standard Type) ■AR Coolant Collet (OH Type) *For more details, please download the PDF or feel free to contact us.
Short Material Feeder 'ASQ-E120'
Of course, it provides a chaotic supply of materials and is equipped with various self-diagnostic functions! It safely supports unmanned operation.

【Specifications (Excerpt)】 ■Material Diameter: Φ8 to Φ120mm, H10 to H100mm ■Material Length ・Minimum: 300mm and above ・Maximum: Length from the rear end of the lathe spindle to the chuck face ■Material Weight: 60kg per piece *For more details, please download the PDF or feel free to contact us.
Short Material Feeder 'ASQ-51II'
The slide mechanism can move back and forth! Immediate forward movement upon initial introduction reduces material exchange time.

【Specifications (Excerpt)】 ■Material diameter: Φ5 to Φ51mm, H5 to H44mm ■Material length ・Shortest: 150mm and up ・Longest: Length from the rear end of the lathe spindle to the chuck face, or 1,200mm ■Material surface roughness: Black skin and hexagonal materials possible ■Shelf width: 700mm *For more details, please download the PDF or feel free to contact us.
Short Material Feeder 'ASQ-E80'
During processing, the feed pipe separates from the bar stock! The lathe performance is demonstrated at 100% without vibration or noise.

【Specifications (Excerpt)】 ■ Material diameter: Φ8 to Φ80mm, H10 to H68mm ■ Material length ・Shortest: 150mm and up ・Longest: Length from the rear end of the lathe spindle to the chuck face ■ Material surface roughness: Black skin and hexagonal materials possible *For more details, please download the PDF or feel free to contact us.
Pull Holder "PT-45/70"
The range of material handling is wide! It can be easily attached to the standard tool position.

【Specifications】 ■Material Diameter ・PT-45: Φ4 to Φ45mm ・PT-70: Φ4 to Φ70mm *For more details, please download the PDF or feel free to contact us.
Bar End Face Processing Machine "DC-45"
Essential for bar processing! Products with automatic feeding, automatic chucks, and front and rear legs are also available.

【Processing Steps】 ■1. Set the holder on the spindle and adjust the dimensions ■2. Extend the stopper ■3. Place the bar material against the stopper ■4. Chuck and remove the stopper ■5. Start the spindle and begin processing *For more details, please download the PDF or feel free to contact us.
Oil feeder "CLXA 45"
The upper opening and closing cover can be opened from either the front or back for added convenience!

【Specifications (Excerpt)】 ■Residual material handling: Residual length 70–300mm ■Material bending: Less than 0.5mm per meter (MAS404 standard, tolerance grade B or higher) ■Voltage: AC200V ■Power: 3-phase 2.0kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "CELSUS 51"
The amount of oil used is 30L for a 3.0m machine, which is a 50% reduction compared to conventional machines!

【Specifications (Excerpt)】 ■Residual material processing: Residual length 70–500mm ■Material bending: Less than 0.5mm per meter (MAS404 standard, tolerance class B or higher) ■Material surface roughness: At least equivalent to polished material ■Voltage: AC200V ■Power: 3-phase 2kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "CELSUS 26"
The material supply port allows for material supply without opening the cover! Many features have been implemented with consideration for the operator.

【Specifications (Excerpt)】 ■Residual Material Processing: Residual length 50–400mm ■Material Curvature: 0.5mm or less per meter (MAS404 standard, tolerance class B or higher) ■Material Surface Roughness: At least equivalent to polished material ■Voltage: AC200V ■Power: 3-phase 1.5kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "CELSUS 20"
The unique quick-change mechanism makes it easy to replace the support!

【Specifications (Excerpt)】 ■Residual material handling: Residual length 50–400mm ■Material bending: 0.5mm or less per meter (MAS404 standard, tolerance grade B or higher) ■Material surface roughness: At least equivalent to polished material ■Voltage: AC200V ■Power: 3-phase 1.5kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "AZ12X"
The oil pump is energy-saving type! Residual material can be extracted from either side.

【Specifications (Excerpt)】 ■Residual material processing: Residual length 60–300mm ■Material bending: Less than 0.5mm per meter (MAS404 standard, tolerance class B or higher) ■Material surface roughness: At least equivalent to polished material ■Voltage: AC200V ■Power: 3-phase 0.5kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Dry Feeder "AZ12"
With the synchro (main spindle synchronization) device (OP), it follows the high-speed movement of the lathe spindle!

【Specifications (Excerpt)】 ■Residual Material Processing: Residual length 60–300mm ■Material Curvature: Less than 0.5mm per meter (MAS404 standard, tolerance class B or higher) ■Voltage: AC200V ■Power: 3-phase 0.5kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR X-20ZII"
The upper opening and closing cover can be opened from either the front or the back for added convenience!

【Specifications (Excerpt)】 ■Material Curvature: 0.5mm or less per meter (MAS404 standard, tolerance grade B or higher) ■Voltage: AC200/220V ■Power: 3-phase 1.5kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR X-32PN3"
Unique oil support and large roller support applied to the front and intermediate vibration damping sections, further enhancing vibration reduction effectiveness!

【Specifications (Excerpt)】 ■ Scrap Material Processing: Scrap length 70–500mm ■ Material Bending: Less than 0.5mm per meter (MAS404 standard, tolerance Class B or higher) ■ Voltage: AC200V ■ Power: 3-phase 2.0kVA ■ Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR X-65Ev"
Suitable for a wide range of sizes from Φ8 to Φ60(65)mm and hexagonal materials from H10 to H46mm!

【Specifications (Excerpt)】 ■Residual material handling: Residual length 80–250mm ■Material bending: Less than 0.5mm per meter (MAS404 standard, tolerance grade B or higher) ■Voltage: AC200V ■Power: 3-phase 1.5kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR X-45/51PN3"
The upper opening and closing cover can be opened from either the front or back for added convenience!

【Specifications (Excerpt)】 ■Residual material processing: Residual material length 70–500mm ■Material bending: Less than 0.5mm per meter (MAS404 standard, tolerance grade B or higher) ■Voltage: AC200V ■Power: 3-phase 2.0kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR X-45/51MII"
With our unique oil support, high-speed rotation can be achieved!

【Specifications (Excerpt)】 ■ Residual Material Processing ・ Front Discharge Specification ・ Front and Rear Combined Switchable Specification ■ Voltage: AC200V ■ Power: 3-phase 0.7kVA ■ Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR FX-45/51"
Achieve high-speed rotation with unique oil support! The bar stock can be loaded from either the top or front of the feeder.

【Specifications (Excerpt)】 ■ Material Diameter ・FX-45: Φ10 to Φ45mm, H10 to H32mm ・FX-51: Φ10 to Φ51mm, H10 to H36mm ■ Oil Pump: 90W ■ Oil Used: Equivalent to ISO VG32 ■ Delivery Motor: DC Servo Motor 90W ■ Air Source: Pressure 0.5 to 0.7MPa *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR X-04A/07A"
Due to the precise synchronization device and servo motor providing quantitative control, stress does not occur on the workpiece during processing, allowing for stable high-speed rotation.

For more details, please download the catalog or feel free to contact us.
Oil feeder "ASR RX45Ev/51Ev"
Achieve stable continuous operation through reliable residual material processing! Enhance the vibration damping effect of hexagonal materials.

【Specifications (Excerpt)】 ■Residual Material Processing: Residual length 70–500mm ■Material Curvature: 0.5mm or less per meter (MAS404 standard, tolerance grade B or higher) ■Voltage: AC200V ■Power: 3-phase 2.0kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.
Oil feeder "ASR RX32Ev"
The upper opening and closing cover can be opened and closed from either side! Setup changes and maintenance are even easier.

【Specifications (Excerpt)】 ■Residual material processing: Residual length 70–500mm ■Material bending: 0.5mm or less per meter (MAS404 standard, tolerance class B or higher) ■Voltage: AC200V ■Power: 3-phase 2.0kVA ■Frequency: 50Hz/60Hz *For more details, please download the PDF or feel free to contact us.