アクアシステム 本社・須越工場・AQUASYSTEM（中国・タイ・ベトナム） Official site

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

<Specifications> Fluid used: Solvent (For details, please refer to the catalog) Usable viscosity: 3,000 cP Maximum discharge rate (at 1 cP): [APD-20ASN] 30L/min, [APD-25ASN] 70L/min Maximum lift height: 2m <Accessories> Nozzle: Manual gun Hose material: SUS hose Hose (inner diameter × length): [APD-20ASN] Φ19×2m, [APD-25ASN] Φ25×2m Air connection port: Air coupler plug (male) Fluid contact materials: [Body・Nozzle] AL/Bs/SUS/CAC, [Packing] PTFE/FKM/FFKM with EPDM packing* Weight: [APD-20ASN] 6.2kg, [APD-25ASN] 8.4kg

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) sealed pressurized type Liquid to be used: Solvent Usable viscosity (at 1cP): 3,000cP Maximum discharge rate: [APD-20AS] 35L/min, [APD-25AS] 115L/min Maximum lift height: 2m <Accessories> Nozzle: Ball valve Hose material: SUS304 hose Hose (inner diameter × length): [APD-20AS] Φ19×2m, [APD-25AS] Φ25×2m Air connection port: Air coupler plug (male) <Materials in contact with liquid> Main body & nozzle: AL/Bs/SUS/CAC Packing: PTFE/FKM/FFKM with EPDM packing* Weight: [APD-20AS] 6.3kg, [APD-25AS] 8.5kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details. *For solvents such as acetone and MEK, please change the standard fluororubber packing to the included EPDM packing for use.

Pump for kerosene, light oil, and gasoline with a gun nozzle! Utilizes internal pressure with compressed air for transfer! Minimizes residual liquid, energy-saving, and safely allows for portioning of highly flammable liquids.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) Sealed Pressure Type Usable Liquids: Kerosene, Light Oil, Gasoline Usable Viscosity: 3,000 cP Maximum Discharge Rate (at 1 cP): [APD-20GN] 50L/min, [APD-25GN] 70L/min Maximum Lifting Height: 2m Accessories Nozzle: Manual Gun Hose Material: NBR Hose Hose (Inner Diameter × Length): [APD-20G] Φ19×2m, [APD-25G] Φ25×2m Air Connection Port: Air Coupler Plug (Male) Liquid Contact Materials Body & Nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE/NBR Weight: [APD-20GN] 6.3kg, [APD-25GN] 8.3kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details.

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2/small plug G3/4) sealed pressurized type Usable liquids: kerosene, light oil, gasoline Usable viscosity: 3,000 cP Maximum discharge rate (at 1 cP): [APD-20G] 55L/min, [APD-25G] 115L/min Maximum lift height: 2m Accessories Nozzle: ball valve Hose material: NBR hose Hose (inner diameter × length): [APD-20G] Φ19×2m, [APD-25G] Φ25×2m Air connection port: air coupler plug (male) Contact part materials Main body & nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE Weight: [APD-20G] 6.4kg, [APD-25G] 8.8kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details.

A pump that uses compressed air to utilize internal pressure for transfer, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids in small quantities.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) Sealed Pressurized Type Liquid to be Used: Oil Usable Viscosity: 3,000 cP Maximum Discharge Rate (at 1 cP): [APD-20N] 55L/min, [APD-25N] 80L/min Maximum Lift Height: 2m Accessories Nozzle: Manual Gun Hose Material: PVC Hose Hose (Inner Diameter × Length): [APD-20N] Φ25×2m, [APD-25N] Φ32×2m Air Connection Port: Air Coupler Plug (Male) Contact Parts Material Main Body & Nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE/NBR Weight: [APD-20N] 4.3kg, [APD-25N] 5.1kg *Specifications may change due to improvements. Please contact us for the latest specification details if needed.

A pump that uses compressed air to transfer liquids by utilizing internal pressure! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3 / 4) sealed pressurized type Liquid to be used: Oil Usable viscosity: 3,000 cP Maximum discharge rate (at 1 cP): [APD-20] 65L/min, [APD-25] 150L/min Maximum lift height: 2m Accessories Nozzle: Ball valve Hose material: PVC hose Hose (inner diameter × length): [APD-20] Φ25 × 2m, [APD-25] Φ32 × 2m Air connection port: Air coupler plug (male) Contact part materials Body & nozzle: AL/Bs/SUS/CAC Packing: FKM/PTFE Weight: [APD-20] 4.4kg, [APD-25] 5.6kg *Specifications may change due to improvements. Please contact us if you need to confirm the latest specification details.

A new filter ideal for chip recovery has arrived! A must-see for customers using NC lathes and machining centers!

【Bag Filter Size】 Bag filter for APDQO-F: Height 520 × Width 230 (mm) Bag filter for APDQO-F100: Height 380 × Width 230 (mm) Bag filter for J-FF: Height 330 × Width 210, Width lower part 110 (mm) 【J-F Series】 ■J-FS・J-FF Air consumption during intake: 230L/min Intake lift: 4m Dust collection capacity: 10L Maximum discharge amount: 60L/min Maximum intake amount: 60L/min 【APDQO-F Series】 ■APDQO-FS・APDQO-FF Air consumption during intake: 690L/min Intake lift: 2.5m Dust collection capacity: 180L Maximum discharge amount: 140L/min Maximum intake amount: 130L/min (supply air hose diameter φ6.5)・160L/min (supply air hose diameter φ12) ■APDQO-FS100・APDQO-FF100 Air consumption during intake: 320L/min Intake lift: 2.5m Dust collection capacity: 100L Maximum discharge amount: 140L/min Maximum intake amount: 100L/min (supply air hose diameter φ6.5)・120L/min (supply air hose diameter φ12)

Cutting fluids for machine tools can be reused! Tank cleaning time is significantly reduced!

**Filter Type** APDQO-FF100 (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FF100 (Non-woven Fabric Filter) By using a stainless steel filter, it is designed for repeated use. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. ● SUS-made 40 mesh. APDQO-FB100 (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. ● Easy to clean the filter. ● Less prone to clogging, making cleaning simple. ● Reduces dirt and unpleasant odors during cleaning.

Reusing cutting fluids for machine tools and tank cleaning.

**Filter Types** APDQO-FS (Stainless Steel Filter) This specification allows for repeated use by utilizing a stainless steel filter. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. - SUS-made 40 mesh. APDQO-FF (Non-woven Fabric Filter) This specification allows for easy disposal and maintenance by using non-woven fabric. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FB (Bag Filter) The cleaning time required when the dirt is severe compared to our conventional stainless steel filter is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**Filter Types** J-FF (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. J-FS (Stainless Steel Filter) Utilizing a stainless steel filter allows for repeated use. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. - SUS-made 40 mesh. J-FB (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

Introducing the "Tank Cleaning and Filtration Cleaner" for customers using NC lathes and MC lathes, designed to reduce work burden and achieve efficient cutting fluid management.

<Common Specifications> Working Fluid: Water-soluble cutting fluid Usable Viscosity: 500cP <APDQO-F Series> Usable Container: 200L Open Drum Air Consumption During Suction: 690L/min Suction Lift: 2.5m Maximum Discharge Rate at 1cP: 140L/min Maximum Suction Rate with Supply Air Hose Diameter Φ6.5: 130L/min Body & Nozzle: AL/Acrylic/Iron/Bs Packing: NBR/FKM Weight (kg): 42.5/43 <APDQO-F100 Series> Usable Container: 100L Open Drum Air Consumption During Suction: 320L/min Suction Lift: 2.5m Maximum Discharge Rate at 1cP: 110L/min Maximum Suction Rate with Supply Air Hose Diameter Φ6.5: 100L/min Body & Nozzle: AL/Acrylic/Iron/Bs Packing: NBR/FKM Weight (kg): 30.5/30.7 <J-F Series> Air Consumption During Suction: 230L/min Suction Lift: 4m Maximum Discharge Rate at 1cP: 60L/min Maximum Suction Rate with Supply Air Hose Diameter Φ6.5: 60L/min Body & Nozzle: AL/Acrylic Packing: ABS Resin/NBR Weight (kg): 36.3/37

Reduce downtime by cleaning the cutting fluid tank! Easy collection and disposal. Continuous operation is OK. J-F series, APDQO series.

**J-F Series** ■ J-FS・J-FF Air consumption during suction: 230L/min Suction lift: 4m Dust collection capacity: 10L Maximum discharge volume: 60L/min Maximum suction volume: 60L/min Maximum vacuum pressure: 14kPa Weight: 36kg Included Nozzle: Straight pipe Hose: Discharge side PVC (1.5m × φ32) Suction side reinforced PVC (3m × φ25) **APDQO-F Series** ■ APDQO-FS・APDQO-FF Air consumption during suction: 690L/min Suction lift: 2.5m Dust collection capacity: 180L Maximum discharge volume: 140L/min Maximum suction volume: 130L/min (supply air hose diameter φ6.5)・160L/min (supply air hose diameter φ12) Maximum vacuum pressure: 25kPa Weight: 32.5kg ■ APDQO-FS100・APDQO-FF100 Air consumption during suction: 320L/min Suction lift: 2.5m Dust collection capacity: 100L Maximum discharge volume: 140L/min Maximum suction volume: 100L/min (supply air hose diameter φ6.5)・120L/min (supply air hose diameter φ12) Maximum vacuum pressure: 26kPa Weight: 30.5kg

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (100μ or more, 1cm or less) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 475 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction volume (L/min): 90 ●Suction lift (m): 2 ●Material of wetted parts ・Body/Nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 11.1 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, chips (100μ or more, 1cm or less) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 475 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 90 ●Suction lift (m): 2 ●Material of wetted parts ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 5.6 *For more details, please refer to the PDF document or feel free to contact us.

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

【Specifications (Excerpt)】 ●Collected materials: Oil, cutting oil, waste, metal shavings (between 100μ and 1cm) ●Usable viscosity (cP): 3,000 ●Air consumption (L/min): 475 ●Recommended supply pressure (Mpa): 0.4 to 0.6 ●Maximum suction amount (L/min): 90 ●Suction lift (m): 2 ●Materials in contact with liquid ・Body and nozzle: AL/SUS ・Packing: NBR ●Weight (kg): 3.9 *For more details, please refer to the PDF document or feel free to contact us.

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for on-site cleaning as it can handle both dry and wet materials.

<Specifications> Model: APPQO600S Collected materials: Oil, cutting oil, waste, metal shavings (under 1cm) Compatible viscosity (cP): 3,000 Air consumption (L/min): 475 Recommended supply pressure (Mpa): 0.4 to 0.6 Maximum suction amount (L/min): 90 Suction lift (m): 2 Weight (kg): 3.9 <Accessories> Nozzle: Main nozzle (straight) Hose material: PVC (2m x φ32) <Contact parts material> Body/Nozzle: AL/SUS Packing: NBR (Optional) * Oil stopper (APPQO-OP) Prevention of liquid leakage when full: Ball material (PE) * Filter set: Required for dry use; cannot be installed without the oil stopper. Can collect dust larger than 100 microns and smaller than 1cm; cannot collect aluminum powder or similar materials that pose a risk of dust explosion. * Hose length can be changed. * Open drum can (APPQO-OP) * Carry for drum can (CARRY) * Top plate for mounting on 200L open drum (DTB) * Carry for 200L open drum (DC-NBR) * Not for use with materials that pose a risk of dust explosion or flammable liquids.