AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM） Official site

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**About the Ball Valve with Gun Nozzle** Optionally available in ball valve specifications! By installing a ball valve, it is possible to operate the valve open and close during liquid discharge. Model: CHD1-20ASUSN Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Liquid Used: Solvent Usable Viscosity (cP): 100 Air Consumption (L/min): 583 (Recommended Supply Pressure 0.5Mpa) Operating Air Pressure (Mpa): 0.4 to 0.6 Compressor (Horsepower): 5 Discharge Pressure (Mpa): 0.035 Maximum Discharge Volume (1cP/L/min): [CHD1-20ASUS, CHD1-20ASUSV] 30 [CHD1-20ASUN] 20 Maximum Lifting Height (m): 3.5 Suction Lift Height (m): 2 Accessories: Discharge Hose: SUS Hose (Φ19×2m) Connection Type: Rc3/4 Nozzle: [CHD1-20ASUN] GN-SUS20 Material in Contact with Liquid: Main Body & Pipe: SUS304/SUS (SCS13)/ETFE Packing: PTFE/FFKM Weight (kg): [CHD1-20ASUS] 7.0 [CHD1-20ASUSV] 7.5 [CHD1-20ASUN] 8.1

For applying oil and adhesive! Also for filling varnish and grease!

Oil Use APP-C1 Series <Specifications> Model: APP-C1-AL Recovered Material: Oil Usable Viscosity (cP): 10,000 Discharge Rate (L/min at 1 cP): 190 Maximum Discharge Head (m): 30 (when using 0.3 MPa) Air Connection Port: Air Coupler Plug (Male) <Accessories> Wrench (12-16) <Fluid Contact Material> Main Body: SS400 Fluid Contact Part: AL/SUS304 Packing: NBR Weight (kg): 28.0 Solvent Use APP Series <Specifications> Model: APP-C1-SUS Recovered Material: Solvent* Usable Viscosity (cP): 10,000 Discharge Rate (L/min at 1 cP): 190 Maximum Discharge Head (m): 30 Air Connection Port: Air Coupler Plug (Male) <Accessories> Wrench (12-16) <Fluid Contact Material> Main Body: SUS304 Fluid Contact Part: SUS Packing: FKM Weight (kg): 28.0 *When using solvents, only those that do not damage the material are allowed. *Regarding explosion-proof specifications, please confirm as opinions may vary by the local fire department. *When using adhesives, only those that do not damage the material are allowed. For details, please contact us.