AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM） Official site

A heater that warms up drums and other containers to reduce the viscosity of liquids.

<HTJ-A-P> Recommended container: 20L pail / 18L one-gallon can Standard capacity (L): 25 Circumference (mm): 870–1,020 Height (mm): 400 Power (W): 200 Weight (kg): 2.0 <HTJ-B-50D> Recommended container: 50L drum Standard capacity (L): 50 Circumference (mm): 1,100–1,250 Height (mm): 460 Power (W): 250 Weight (kg): 2.0 <HTJ-C-100D> Recommended container: 100L drum Standard capacity (L): 100 Circumference (mm): 1,400–1,650 Height (mm): 370 Power (W): 400 Weight (kg): 3.0 <HTJ-D-200D> Recommended container: 200L drum Standard capacity (L): 210 Circumference (mm): 1,800–1,950 Height (mm): 440 Power (W): 450 Weight (kg): 3.0 <Common to the above three types> Heating wire set temperature (°C): 0–90 Outer material: Polyurethane-coated nylon (black) Internal insulation material: Polyurethane-coated nylon (black) Specification table "Applications/Examples of Achievements" follows.

Essential for fuel-saving measures! Electric drum pump with full-stop function.

Model: TDP1K24-ATN / TDP1-ATNK24 / TDP1M33-ATN / TDP1-ATN Compatible Container: 200L Closed Drum Liquid Used: Kerosene / Light Oil Usable Viscosity (cP): 100 Power Supply (V): 100 Current (A): 2 Rated (min): Continuous Operation Possible Discharge Pressure (Mpa): 0.04 Maximum Discharge Volume (1cP / L/min): 20 Maximum Lift Height (m): 2 Maximum Suction Height (m): 2 <Accessories> Nozzle: Auto Stop Gun Nozzle (ATNH-20) Hose Material (Inner Diameter × Length): Oil-Resistant Rubber Hose (φ20 × 2m) <Flow Meter> TDP1K24-ATN: Turbine (LCD Digital Display) TB-K24-FM (Body Side) TTDP1-ATNK24: Turbine (LCD Digital Display) TB-K24-FM (Nozzle Side) TDP1M33-ATN: Disk (Mechanical Digital Display) MK33-25D (Body Side) <Contact Parts Material> Body: AL/SUS/ETFE/PTFE Packing: NBR <Weight (kg)> TDP1K24-ATN, TDP1-ATNK24: 6.3 TDP1M33-ATN: 7.4 TDP1-ATN: 5.9

Battery-operated sensor auto-stop nozzle with auto-stop function even when self-weight falls.

Model: ATNB-20 Fluid used: Kerosene, light oil, medium viscosity oil Drive method: Battery-operated (uses three AA lithium batteries) / Approximately 200 uses possible Usable viscosity (cP): 1,500 Maximum operating pressure (Mpa): 0.2 Included fittings: 45° swivel Connection diameter: Rc3/4 Recommended hose: 20A Outlet pipe outer diameter (mm): 24 Material in contact with fluid - Main body: AL Material in contact with fluid - Gasket: NBR/PTFE/Nylon Weight (kg): 1.7 *This product does not have a "lever hook" or similar function.

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**About the Ball Valve with Gun Nozzle** Optionally available in ball valve specifications! By installing a ball valve, it is possible to operate the valve open and close during liquid discharge. Model: CHD1-20ASUSN Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Liquid Used: Solvent Usable Viscosity (cP): 100 Air Consumption (L/min): 583 (Recommended Supply Pressure 0.5Mpa) Operating Air Pressure (Mpa): 0.4 to 0.6 Compressor (Horsepower): 5 Discharge Pressure (Mpa): 0.035 Maximum Discharge Volume (1cP/L/min): [CHD1-20ASUS, CHD1-20ASUSV] 30 [CHD1-20ASUN] 20 Maximum Lifting Height (m): 3.5 Suction Lift Height (m): 2 Accessories: Discharge Hose: SUS Hose (Φ19×2m) Connection Type: Rc3/4 Nozzle: [CHD1-20ASUN] GN-SUS20 Material in Contact with Liquid: Main Body & Pipe: SUS304/SUS (SCS13)/ETFE Packing: PTFE/FFKM Weight (kg): [CHD1-20ASUS] 7.0 [CHD1-20ASUSV] 7.5 [CHD1-20ASUN] 8.1

For applying oil and adhesive! Also for filling varnish and grease!

Oil Use APP-C1 Series <Specifications> Model: APP-C1-AL Recovered Material: Oil Usable Viscosity (cP): 10,000 Discharge Rate (L/min at 1 cP): 190 Maximum Discharge Head (m): 30 (when using 0.3 MPa) Air Connection Port: Air Coupler Plug (Male) <Accessories> Wrench (12-16) <Fluid Contact Material> Main Body: SS400 Fluid Contact Part: AL/SUS304 Packing: NBR Weight (kg): 28.0 Solvent Use APP Series <Specifications> Model: APP-C1-SUS Recovered Material: Solvent* Usable Viscosity (cP): 10,000 Discharge Rate (L/min at 1 cP): 190 Maximum Discharge Head (m): 30 Air Connection Port: Air Coupler Plug (Male) <Accessories> Wrench (12-16) <Fluid Contact Material> Main Body: SUS304 Fluid Contact Part: SUS Packing: FKM Weight (kg): 28.0 *When using solvents, only those that do not damage the material are allowed. *Regarding explosion-proof specifications, please confirm as opinions may vary by the local fire department. *When using adhesives, only those that do not damage the material are allowed. For details, please contact us.