アクアシステム 本社・須越工場・AQUASYSTEM（中国・タイ・ベトナム） Official site

Essential for fuel-saving measures! Electric drum pump with full-stop function.

Model: TDP1K24-ATN / TDP1-ATNK24 / TDP1M33-ATN / TDP1-ATN Compatible Container: 200L Closed Drum Liquid Used: Kerosene / Light Oil Usable Viscosity (cP): 100 Power Supply (V): 100 Current (A): 2 Rated (min): Continuous Operation Possible Discharge Pressure (Mpa): 0.04 Maximum Discharge Volume (1cP / L/min): 20 Maximum Lift Height (m): 2 Maximum Suction Height (m): 2 <Accessories> Nozzle: Auto Stop Gun Nozzle (ATNH-20) Hose Material (Inner Diameter × Length): Oil-Resistant Rubber Hose (φ20 × 2m) <Flow Meter> TDP1K24-ATN: Turbine (LCD Digital Display) TB-K24-FM (Body Side) TTDP1-ATNK24: Turbine (LCD Digital Display) TB-K24-FM (Nozzle Side) TDP1M33-ATN: Disk (Mechanical Digital Display) MK33-25D (Body Side) <Contact Parts Material> Body: AL/SUS/ETFE/PTFE Packing: NBR <Weight (kg)> TDP1K24-ATN, TDP1-ATNK24: 6.3 TDP1M33-ATN: 7.4 TDP1-ATN: 5.9

For daily maintenance! Since filtration cleaning can be done without stopping the machine tools, it allows for effective use of cleaning time.

【Customization】 ■ Drip-proof holder and small item storage ■ Optional filter ■ Hose extension *For more details, please refer to the PDF document or feel free to contact us.

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**Filter Types** J-FF (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. J-FS (Stainless Steel Filter) Utilizing a stainless steel filter allows for repeated use. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. - SUS-made 40 mesh. J-FB (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

A heater that warms up drums and other containers to reduce the viscosity of liquids.

<HTJ-A-P> Recommended container: 20L pail / 18L one-gallon can Standard capacity (L): 25 Circumference (mm): 870–1,020 Height (mm): 400 Power (W): 200 Weight (kg): 2.0 <HTJ-B-50D> Recommended container: 50L drum Standard capacity (L): 50 Circumference (mm): 1,100–1,250 Height (mm): 460 Power (W): 250 Weight (kg): 2.0 <HTJ-C-100D> Recommended container: 100L drum Standard capacity (L): 100 Circumference (mm): 1,400–1,650 Height (mm): 370 Power (W): 400 Weight (kg): 3.0 <HTJ-D-200D> Recommended container: 200L drum Standard capacity (L): 210 Circumference (mm): 1,800–1,950 Height (mm): 440 Power (W): 450 Weight (kg): 3.0 <Common to the above three types> Heating wire set temperature (°C): 0–90 Outer material: Polyurethane-coated nylon (black) Internal insulation material: Polyurethane-coated nylon (black) Specification table "Applications/Examples of Achievements" follows.

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**About the Ball Valve with Gun Nozzle** Optionally available in ball valve specifications! By installing a ball valve, it is possible to operate the valve open and close during liquid discharge. Model: CHD1-20ASUSN Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Liquid Used: Solvent Usable Viscosity (cP): 100 Air Consumption (L/min): 583 (Recommended Supply Pressure 0.5Mpa) Operating Air Pressure (Mpa): 0.4 to 0.6 Compressor (Horsepower): 5 Discharge Pressure (Mpa): 0.035 Maximum Discharge Volume (1cP/L/min): [CHD1-20ASUS, CHD1-20ASUSV] 30 [CHD1-20ASUN] 20 Maximum Lifting Height (m): 3.5 Suction Lift Height (m): 2 Accessories: Discharge Hose: SUS Hose (Φ19×2m) Connection Type: Rc3/4 Nozzle: [CHD1-20ASUN] GN-SUS20 Material in Contact with Liquid: Main Body & Pipe: SUS304/SUS (SCS13)/ETFE Packing: PTFE/FFKM Weight (kg): [CHD1-20ASUS] 7.0 [CHD1-20ASUSV] 7.5 [CHD1-20ASUN] 8.1

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a greater variety of compatible liquids compared to our previous model (CHD-20SUS)! Suitable for solvent transfer in chemical plants.

"About the Ball Valve with Gun Nozzle" Supports ball valve specifications as an option! By installing a ball valve, valve opening and closing operations are possible during liquid discharge. Model: CHD1-20SUS/CHD1-20SUSV/CHD1-20SUSN Compatible container: 200L closed drum (JIS standard: large plug G2/small plug G3/4) Liquid used: solvent Usable viscosity: 100cP Power supply: AC100V single phase Power consumption: 200w Current: 2A Rated (minutes): Continuous operation possible Discharge pressure: 0.04Mpa Maximum discharge amount (at 1cP): [CHD1-20SUS/CHD1-20SUSV] 33L/min [CHD1-20SUSN] 25L/min Maximum lift height: 4m Suction lift height: 2m Accessories: Discharge hose: SUS hose (2m x Φ20) Connection type: Rc3/4 Materials in contact with liquid: Main body/Pipe: SUS304/SUS (SCS13)/ETFE/PTFE Gasket: PTFE/FFKM Power cord (m): 3 Weight: [CHD1-20SUS] 7.5kg [CHD1-20SUSV] 8.0kg [CHD1-20SUSN] 8.6kg

As emergency supplies for apartments and municipalities. For replenishing drinking water during disaster emergencies.

Model: EDO-40 Frequency: 50/60Hz Rated Current: 5.1/4.5A Rated Speed: 1420/1700rpm Power Consumption: 345/325w Output Shaft Torque 50Hz: 47Nm 60Hz: 39.2Nm Flow Rate 50Hz: 25L/MIN 60Hz: 30L/MIN Suction Lift: 4m Discharge Lift: 7m Weight: 36.5kg Model: EDO-50 Frequency: 50/60Hz Rated Current: 8.7/7.9A Rated Speed: 1440/1730rpm Power Consumption: 632/604w Output Shaft Torque 50Hz: 94Nm 60Hz: 78Nm Flow Rate 50Hz: 80L/MIN 60Hz: 100L/MIN Suction Lift: 5m Discharge Lift: 7m Weight: 60.0kg Model: EDO-50H Frequency: 50/60Hz Rated Current: 8.7/7.9A Rated Speed: 1440/1730rpm Power Consumption: 632/604w Output Shaft Torque 50Hz: 187Nm 60Hz: 156Nm Flow Rate 50Hz: 40L/MIN 60Hz: 50L/MIN Suction Lift: 5m Discharge Lift: 12m Weight: 60.0kg

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

<Specifications> Liquid used: Water (For details, please refer to the catalog)

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

<Specifications> Liquid used: Oil (For details, please refer to the catalog) Usable viscosity: 5000 cP (varies by nozzle)

【All brass / water use】 Water absorption 6m (2.5m when dry) with a performance of 15m lift! Usable in places without power supply.

【Specifications (Excerpt)】 <BCNo.0-15> ● Liquid used: Water ● Discharge volume (cc/1 stroke): 240 ● Connection flange (with phase flange): Rc1/2 (15A) ● Accessories ・ Main body parts: CAC/SUS ・ Handle: AL ・ Packing: PTFE/NBR (Non-asbestos) ● Weight (kg): 5.5 *For more details, please refer to the PDF document or feel free to contact us.

Water absorption of 6m (2.5m when dry) with a performance of 15m in height. Made of aluminum, lightweight, and equipped with a manual water supply pump.

<Specifications> Liquid used: Water (For details, please refer to the catalog)

Suction depth of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

<Specifications> Fluid used: Oil (For details, please refer to the catalog) Usable viscosity: 5000 cP (varies by nozzle)

For dispensing AdBlue in locations without power, for refilling from a back-in-box.

<Specifications> Liquid used: AdBlue, water (For details, please refer to the catalog)