AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM） Official site

You can easily tell if the liquid in the drum is full or empty with just one touch!

<Product Description> 1) Measurement can be easily done with a single touch, making the confirmation work for full and empty states hassle-free. - Pressing the white switch lights it up red, and it automatically stops after 3 minutes. - To resume, simply press the switch again. - When full or empty, a buzzer sounds for 15 seconds and flashes red. * Pressing the switch stops the sound. - The position of the sensor can be adjusted to set the liquid level line for full and empty states. 2) It uses batteries and can be used approximately 1,000 times with a single battery replacement. - It uses 4 standard alkaline batteries (AA size). - It also supports lithium batteries, which are twice as durable as conventional ones and last longer in cold environments. <Sensor Type Liquid Level Gauge for Full/Empty Product Specifications> Model: GDB-CF/GDB-CL Measuring Method: Sensor Type (Contact Type) Applicable Liquids: Low viscosity oil, kerosene, light oil, water, wastewater, waste liquid Recommended Battery: 4 AA alkaline batteries Liquid Temperature Range: 0℃ to 40℃ Size (mm): Φ97×265/97×1070 Weight (kg): 0.4/0.7

Reusing cutting fluids for machine tools and tank cleaning.

**Filter Types** APDQO-FS (Stainless Steel Filter) This specification allows for repeated use by utilizing a stainless steel filter. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. - SUS-made 40 mesh. APDQO-FF (Non-woven Fabric Filter) This specification allows for easy disposal and maintenance by using non-woven fabric. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FB (Bag Filter) The cleaning time required when the dirt is severe compared to our conventional stainless steel filter is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

Cutting fluids for machine tools can be reused! Tank cleaning time is significantly reduced!

**Filter Type** APDQO-FF100 (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FF100 (Non-woven Fabric Filter) By using a stainless steel filter, it is designed for repeated use. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. ● SUS-made 40 mesh. APDQO-FB100 (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. ● Easy to clean the filter. ● Less prone to clogging, making cleaning simple. ● Reduces dirt and unpleasant odors during cleaning.

Non-sticky! Refreshing, smooth mist. Ideal mist fan for heatstroke and static electricity prevention in areas where open flames are prohibited.

<Specifications> Model: ACM-A/ACM-E Nozzle Type: 2-fluid Mist Spray Volume: Adjustable Water Consumption/1h: Valve Opening 90 degrees/12L 1mm/0.09L 2mm/0.96L Water Supply Method: Tank/Special Container Compressor Horsepower: 3 Operating Air Pressure (Mpa): 0.4–0.6 Air Consumption (m3/min): 0.33 Air Connection Port: Air Coupler Plug (Male) Contact Parts Material: Main Body: POM/SUS/Water-resistant Polyurethane/PVC Packing: FKM Accessories: S-hook/Steel Plate (65×45)/Special Container Weight (kg): 1.0

For transferring low-viscosity oils such as kerosene, light oil, and biodiesel! Electric handheld pump.

【Specifications (Excerpt)】 ●Type: Pump only ●Liquid used: Oil, kerosene, light oil, biodiesel ●Usable viscosity (cP): 500 ●Power supply (V): 100 ●Current (A): 0.9 ●Rated (minutes): Continuous operation possible ●Discharge pressure (Mpa): 0.1 ●Maximum discharge volume (1cP/L/min): 30 ●Maximum lift height (m): 10 ●Suction lift height (m): 5 ●Weight (kg): [EMH-20FC] 7.0 [EMH-20SUS] 8.8 [EMHH-20FC] 11.8 *For more details, please refer to the PDF document or feel free to contact us.

[For oil, kerosene, light oil, and biodiesel / for drums] Electric handheld pump for transferring low-viscosity oils such as kerosene, light oil, and biodiesel!

【Specifications (Excerpt)】 ●Type: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) ●Liquid Used: Oil, Kerosene, Diesel ●Usable Viscosity (cP): 500 ●Power Supply (V): 100 ●Current (A): 0.9 ●Rated (minutes): Continuous operation possible ●Discharge Pressure (Mpa): 0.1 ●Maximum Discharge Amount (1cP / L/min): 30 ●Maximum Lift Height (m): 10 ●Suction Lift Height (m): 5 ●Weight (kg): [EMHD-20FC] 11.8 [EMHD-20SUS] 13.6 *For more details, please refer to the PDF document or feel free to contact us.

A heater that warms up drums and other containers to reduce the viscosity of liquids.

<HTJ-A-P> Recommended container: 20L pail / 18L one-gallon can Standard capacity (L): 25 Circumference (mm): 870–1,020 Height (mm): 400 Power (W): 200 Weight (kg): 2.0 <HTJ-B-50D> Recommended container: 50L drum Standard capacity (L): 50 Circumference (mm): 1,100–1,250 Height (mm): 460 Power (W): 250 Weight (kg): 2.0 <HTJ-C-100D> Recommended container: 100L drum Standard capacity (L): 100 Circumference (mm): 1,400–1,650 Height (mm): 370 Power (W): 400 Weight (kg): 3.0 <HTJ-D-200D> Recommended container: 200L drum Standard capacity (L): 210 Circumference (mm): 1,800–1,950 Height (mm): 440 Power (W): 450 Weight (kg): 3.0 <Common to the above three types> Heating wire set temperature (°C): 0–90 Outer material: Polyurethane-coated nylon (black) Internal insulation material: Polyurethane-coated nylon (black) Specification table "Applications/Examples of Achievements" follows.

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

<Specifications> Usable Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Usable Liquid: Oil (For details, please refer to the catalog) Usable Viscosity: 3,000 cP Function: Suction only Air Consumption: 167 L/min Suction Lift: 2m Suction Amount (at 1 cP): 80 L/min Weight: 3.3 kg 《Mechanism of Air Pressure Pump》 This pump inserts reduced pressure compressed air into the drum, changing the internal pressure of the drum to discharge and suction liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign substances and viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with flammable or explosive liquids and in hazardous environments. *Flow meter and gun nozzle included; foreign substance contamination is not allowed. 《Mechanism of Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently collect without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. *For disposal methods, please contact your contractor.

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquid: solvent (For details, please refer to the catalog) Usable viscosity: 3,000 cP Function: Suction only Air consumption: 167 L/min Suction lift: 2 m Suction amount (at 1 cP): 50 L/min Weight: 4.0 kg 《Mechanism of Air Pressure Pump》 This is a pump that discharges and sucks liquid by inserting reduced pressure compressed air into the drum and changing the internal pressure of the drum. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used in environments with flammable or explosive liquids. *Flow meter and gun nozzle cannot be used with foreign substances. 《Mechanism of Air Vacuum Pump》 This is a pump that collects all types of liquids such as kerosene, light oil, oil, and chemicals from a closed drum. It can safely and efficiently collect without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. *For disposal methods, please contact your contractor.

Collecting cutting fluids, waste oil, and solvents such as kerosene, light oil, gasoline, IPA, methanol, and toluene in drums.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquids: kerosene, light oil, gasoline (For details, please refer to the catalog) Usable viscosity: 3,000 cP Function: Suction only Air consumption: 167L/min Suction lift: 2m Suction rate (at 1 cP): 50L/min Weight: 4.4kg <Mechanism of Air Pressure Pump> This is a pump that discharges and sucks liquid by inserting reduced-pressure compressed air into the drum and changing the internal pressure of the drum. Since there are no obstacles in the flow path, it can handle liquids with foreign substances or viscosities (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle cannot be used with contaminated liquids. <Mechanism of Air Vacuum Pump> This is a pump that collects all kinds of liquids such as kerosene, light oil, oil, and chemicals from a closed drum. It can safely and efficiently collect without using electricity through an ejector mechanism. The collected drum can be handed directly to a waste disposal contractor. *For disposal methods, please contact your contractor.