アクアシステム 本社・須越工場・AQUASYSTEM（中国・タイ・ベトナム） Official site

You can easily tell if the liquid in the drum is full or empty with just one touch!

<Product Description> 1) Measurement can be easily done with a single touch, making the confirmation work for full and empty states hassle-free. - Pressing the white switch lights it up red, and it automatically stops after 3 minutes. - To resume, simply press the switch again. - When full or empty, a buzzer sounds for 15 seconds and flashes red. * Pressing the switch stops the sound. - The position of the sensor can be adjusted to set the liquid level line for full and empty states. 2) It uses batteries and can be used approximately 1,000 times with a single battery replacement. - It uses 4 standard alkaline batteries (AA size). - It also supports lithium batteries, which are twice as durable as conventional ones and last longer in cold environments. <Sensor Type Liquid Level Gauge for Full/Empty Product Specifications> Model: GDB-CF/GDB-CL Measuring Method: Sensor Type (Contact Type) Applicable Liquids: Low viscosity oil, kerosene, light oil, water, wastewater, waste liquid Recommended Battery: 4 AA alkaline batteries Liquid Temperature Range: 0℃ to 40℃ Size (mm): Φ97×265/97×1070 Weight (kg): 0.4/0.7

A liquid level gauge that can be connected to an air pump to check whether the liquid in a JIS standard 200L drum is full or empty.

Model: GDA-HH/GDA-HL Type: For JIS standard 200L drums Liquid used: Oil, kerosene, light diesel, solvent Usable viscosity (cP): 3,000 Recommended supply pressure (Mpa): 0.3 to 0.6* Connection diameter: G3/4 Temperature range: Operating (°C) 0 to 60 (depending on usage environment) Storage (°C): 0 to 60 (depending on usage environment) Liquid temperature (°C): 0 to 60 Calculation method: Contact-type sensor Air supply port: Air coupler plug (male) Air output port: Air coupler plug (female) Dimensions (mm): 178×460 / 178×1160 Connection material: Body: SUS304 Packing: – Weight (kg): 1.8 / 2.2

Non-contact detection of liquid in the container! A liquid level gauge that displays the remaining amount on an LCD panel. With the wireless type and using a parent unit, you can manage the remaining amount in real-time with a dedicated PC application!

Oil / Kerosene / Diesel Liquid Level Gauge Series Model: GDE-CL / GDE-CLW / GDE-W / GDE-R Display Type (Possible Display Contents): JIS Standard 200L Drum, Plastic Drum, IBC Container (Tank) (Displays in %, L, mm) and Other Containers (Displays in % and mm / L not available) *Can be used with containers not listed by setting the maximum height of the liquid. However, it can display in % and mm, but not in L. Liquid Used: Oil, Kerosene, Diesel *Can also be used for wastewater and waste liquids. However, it must not contain solvents or chemicals. Drive Method: 4 AA Batteries / AC100V Power Supply (Recommended) or 4 AA Batteries *Battery life is approximately 20 hours (depending on usage conditions and environment) / AC100V Power Supply Usable Viscosity (cP): 3,000 Wireless Function: None / Yes (Subunit) / Yes (Main Unit) Connection Diameter: G3/4 Temperature Range: Operating (°C): 0 to 60 (depending on usage environment) Storage (°C): 0 to 60 (depending on usage environment) Liquid Temperature (°C): 0 to 60 Dimensions (mm): φ106×91 / φ106×203 (including antenna part) / 125×125×154 / 125×125×154 Weight (kg): 450 / 460 / 225 / 225