AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM） Official site

Non-contact detection of liquid in the container! A liquid level gauge that displays the remaining amount on an LCD panel. With the wireless type and using a parent unit, you can manage the remaining amount in real-time with a dedicated PC application!

Oil / Kerosene / Diesel Liquid Level Gauge Series Model: GDE-CL / GDE-CLW / GDE-W / GDE-R Display Type (Possible Display Contents): JIS Standard 200L Drum, Plastic Drum, IBC Container (Tank) (Displays in %, L, mm) and Other Containers (Displays in % and mm / L not available) *Can be used with containers not listed by setting the maximum height of the liquid. However, it can display in % and mm, but not in L. Liquid Used: Oil, Kerosene, Diesel *Can also be used for wastewater and waste liquids. However, it must not contain solvents or chemicals. Drive Method: 4 AA Batteries / AC100V Power Supply (Recommended) or 4 AA Batteries *Battery life is approximately 20 hours (depending on usage conditions and environment) / AC100V Power Supply Usable Viscosity (cP): 3,000 Wireless Function: None / Yes (Subunit) / Yes (Main Unit) Connection Diameter: G3/4 Temperature Range: Operating (°C): 0 to 60 (depending on usage environment) Storage (°C): 0 to 60 (depending on usage environment) Liquid Temperature (°C): 0 to 60 Dimensions (mm): φ106×91 / φ106×203 (including antenna part) / 125×125×154 / 125×125×154 Weight (kg): 450 / 460 / 225 / 225

A heater that warms up drums and other containers to reduce the viscosity of liquids.

<HTJ-A-P> Recommended container: 20L pail / 18L one-gallon can Standard capacity (L): 25 Circumference (mm): 870–1,020 Height (mm): 400 Power (W): 200 Weight (kg): 2.0 <HTJ-B-50D> Recommended container: 50L drum Standard capacity (L): 50 Circumference (mm): 1,100–1,250 Height (mm): 460 Power (W): 250 Weight (kg): 2.0 <HTJ-C-100D> Recommended container: 100L drum Standard capacity (L): 100 Circumference (mm): 1,400–1,650 Height (mm): 370 Power (W): 400 Weight (kg): 3.0 <HTJ-D-200D> Recommended container: 200L drum Standard capacity (L): 210 Circumference (mm): 1,800–1,950 Height (mm): 440 Power (W): 450 Weight (kg): 3.0 <Common to the above three types> Heating wire set temperature (°C): 0–90 Outer material: Polyurethane-coated nylon (black) Internal insulation material: Polyurethane-coated nylon (black) Specification table "Applications/Examples of Achievements" follows.

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**Filter Types** J-FF (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. J-FS (Stainless Steel Filter) Utilizing a stainless steel filter allows for repeated use. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. - SUS-made 40 mesh. J-FB (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.