AQUASYSTEM head office・Sugoshi Factory・Overseas Subsidiary（CHINA・THAILAND・VIETNAM） Official site

Cutting fluids for machine tools can be reused! Tank cleaning time is significantly reduced!

**Filter Type** APDQO-FF100 (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FF100 (Non-woven Fabric Filter) By using a stainless steel filter, it is designed for repeated use. ● Capable of filtering and reusing cutting oil for machine tools, etc. ● Can collect and return to the tank using air power with one unit serving two roles. ● Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. ● SUS-made 40 mesh. APDQO-FB100 (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. ● Easy to clean the filter. ● Less prone to clogging, making cleaning simple. ● Reduces dirt and unpleasant odors during cleaning.

Reusing cutting fluids for machine tools and tank cleaning.

**Filter Types** APDQO-FS (Stainless Steel Filter) This specification allows for repeated use by utilizing a stainless steel filter. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. - SUS-made 40 mesh. APDQO-FF (Non-woven Fabric Filter) This specification allows for easy disposal and maintenance by using non-woven fabric. - Capable of filtering and reusing cutting oil for machine tools and similar applications. - Can collect and return directly to the tank using air power, serving dual purposes. - Continuous operation is possible as it does not have a motor, making it ideal for long hours of work. APDQO-FB (Bag Filter) The cleaning time required when the dirt is severe compared to our conventional stainless steel filter is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**Filter Types** J-FF (Non-woven Fabric Filter) By using non-woven fabric, it can be disposed of as is, making maintenance easy. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. J-FS (Stainless Steel Filter) Utilizing a stainless steel filter allows for repeated use. - Capable of filtering and reusing cutting oil for machine tools, etc. - Can recover and return to the tank using air power, serving dual purposes. - No motor component allows for continuous operation, making it ideal for long hours of work. - SUS-made 40 mesh. J-FB (Bag Filter) Compared to our conventional stainless steel filter, the cleaning time required for severe dirt is reduced to about 1/10. - Easy to clean the filter. - Less prone to clogging, making cleaning simple. - Reduces dirt and unpleasant odors during cleaning.

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a greater variety of compatible liquids compared to our previous model (CHD-20SUS)! Suitable for solvent transfer in chemical plants.

"About the Ball Valve with Gun Nozzle" Supports ball valve specifications as an option! By installing a ball valve, valve opening and closing operations are possible during liquid discharge. Model: CHD1-20SUS/CHD1-20SUSV/CHD1-20SUSN Compatible container: 200L closed drum (JIS standard: large plug G2/small plug G3/4) Liquid used: solvent Usable viscosity: 100cP Power supply: AC100V single phase Power consumption: 200w Current: 2A Rated (minutes): Continuous operation possible Discharge pressure: 0.04Mpa Maximum discharge amount (at 1cP): [CHD1-20SUS/CHD1-20SUSV] 33L/min [CHD1-20SUSN] 25L/min Maximum lift height: 4m Suction lift height: 2m Accessories: Discharge hose: SUS hose (2m x Φ20) Connection type: Rc3/4 Materials in contact with liquid: Main body/Pipe: SUS304/SUS (SCS13)/ETFE/PTFE Gasket: PTFE/FFKM Power cord (m): 3 Weight: [CHD1-20SUS] 7.5kg [CHD1-20SUSV] 8.0kg [CHD1-20SUSN] 8.6kg

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**About the Ball Valve with Gun Nozzle** Optionally available in ball valve specifications! By installing a ball valve, it is possible to operate the valve open and close during liquid discharge. Model: CHD1-20ASUSN Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2 / Small Plug G3/4) Liquid Used: Solvent Usable Viscosity (cP): 100 Air Consumption (L/min): 583 (Recommended Supply Pressure 0.5Mpa) Operating Air Pressure (Mpa): 0.4 to 0.6 Compressor (Horsepower): 5 Discharge Pressure (Mpa): 0.035 Maximum Discharge Volume (1cP/L/min): [CHD1-20ASUS, CHD1-20ASUSV] 30 [CHD1-20ASUN] 20 Maximum Lifting Height (m): 3.5 Suction Lift Height (m): 2 Accessories: Discharge Hose: SUS Hose (Φ19×2m) Connection Type: Rc3/4 Nozzle: [CHD1-20ASUN] GN-SUS20 Material in Contact with Liquid: Main Body & Pipe: SUS304/SUS (SCS13)/ETFE Packing: PTFE/FFKM Weight (kg): [CHD1-20ASUS] 7.0 [CHD1-20ASUSV] 7.5 [CHD1-20ASUN] 8.1

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

【Specifications (Excerpt)】 ＜CHD-20HP＞ ●Compatible container: 200L closed drum (JIS standard: large plug G2 / small plug G3 / 4) ●Liquid used: solvent ●Compatible viscosity (cP): 100 ●Power supply (V): 100 ●Current (A): 1.7 ●Rated (minutes): Continuous operation possible ●Discharge pressure (Mpa): 0.05 ●Maximum discharge amount (1cP/L/min): [CHD-20HP/CHD-20HPV] 55 [CHD-20HPN] 30 ●Maximum lift height (m): 5 ●Suction lift height (m): 2 ●Weight (kg): [CHD-20HP] 4.0 [CHD-20HPV/CHD-20HPN] 5.0 *For more details, please refer to the PDF document or feel free to contact us.

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

【Specifications (Excerpt)】 ＜CHD-20PP＞ ●Compatible Container: 200L Closed Drum (JIS Standard: Large Plug G2/Small Plug G3/4) ●Liquid Used: Solvent ●Compatible Viscosity (cP): 100 ●Power Supply (V): 100 ●Current (A): 1.7 ●Rated (min): Continuous operation possible ●Discharge Pressure (Mpa): 0.05 ●Maximum Discharge Volume (1cP/L/min): [CHD-20PP/CHD-20PPV] 55 [CHD-20PPN] 30 ●Maximum Lift Height (m): 5 ●Suction Lift Height (m): 2 ●Weight (kg): [CHD-20PP] 2.5 [CHD-20PPV/CHD-20PPN] 2.7 *For more details, please refer to the PDF document or feel free to contact us.

[For Solvents/Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

<Specifications> Usable container: 200L closed drum (JIS standard: large plug G2 / small plug G3/4) Usable liquid: solvent (For details, please refer to the catalog) Usable viscosity: 100cP Air consumption: 235L/min (recommended supply pressure 0.3Mpa) Maximum discharge rate (at 1cP): [CHD-20AHP/CHD-20AHPV] 50L/min, [CHD-20AHPN] 25L/min Lifting height: 4m Weight: [CHD-20AHP] 4.0kg, [CHD-20AHPV/CHD-20AHPN] 5.0kg