セントラル科学 Official site

Customizable freely according to scale! Centralized water quality management.

【Specifications】 ■Temperature ・Operating: -20℃ to +55℃ ・Storage: -25℃ to +65℃ Other specifications, such as power supply, may vary depending on combinations, so please feel free to contact us.

Using green LED! Extending the lifespan of the sensor cap.

【Specifications】 ■Measurement Range: ・DO: 0 to 20.00 mg/L ・Saturation Rate: 0 to 200.0% ■Resolution: ・DO: 0.01 mg/L ・Saturation Rate: 0.1% ■Measurement Accuracy: ・Below 1 mg/L: ±0.05 mg/L ・1 mg/L and above: ±0.1 mg/L ■Response Time (t90) ・700IQ: Less than 150 seconds ・701IQ: Less than 60 seconds ■Dimensions: 400 (L) × 40.0 (Φ) mm, 424 (L) × 59.5 (Φ) mm *Compatible with seawater ■Weight: Approximately 900g, 1,500g *Compatible with seawater

Reducing long-term measurement stability and maintenance burden with an ultrasonic cleaning system.

VisoTurb 700IQ ■Measurement range: 0.05 to 4,000 FNU, 0.1 to 4,000 mg/L SiO2, 0.0001 to 400 g/L TSS ■Cleaning method: Ultrasonic cleaning ■Material: Measurement window: Sapphire, Sensor body/head: SUS316Ti *For seawater compatible models, only the sensor head is titanium ■Dimensions: 365 (L) × 40 (Φ), 365 (L) × 59.5 (Φ) *For seawater compatible models ■Weight: Approximately 900g, approximately 1,420g *For seawater compatible models ViSolid 700IQ ■Measurement range: 0 to 300 g/L SiO2, 0 to 1,000 g/L TSS ■Cleaning method: Ultrasonic cleaning ■Material: ・Standard model: Measurement window: Sapphire, Sensor body/head: SUS316Ti ・Seawater compatible model: Measurement window: Sapphire, Sensor body: POM, Sensor head: Titanium ■Dimensions: 365 (L) × 40 (Φ), 365 (L) × 59.5 (Φ) *For seawater compatible models ■Weight: Approximately 900g, approximately 1,420g *For seawater compatible models

Supports continuous measurement using ultrasonic echo method.

■Measurement method: Ultrasonic echo measurement ■Interface detection: Relative intensity or maximum gradient ■Measurement range: 0.40 to 15.00m ■Resolution: 0.01m ■Accuracy: 0.1m ■Flow rate: Below 3m/s ■pH range: 4 to 12 ■Immersion depth: Minimum 5cm / Maximum 3m ■Ambient temperature: 0 to 50℃ ■Dimensions: 442 (L) × 105 (Φ) (maximum) ■Weight: 3.9kg

A wide variety of electrodes available! Leave it to us for water purification, drinking water, and wastewater.

■Operating temperature: 0 to 60°C ■Material ・Sensor body: 316 Ti stainless steel ・Protective cap: PVC ・Sensor holder: POM ・Protection rating: IP68 ■Dimensions ・508 (L) × 40 (Φ) mm, 515 (L) × 59.5 (Φ) mm *for seawater compatibility ■Weight ・970g, 1,800g *for seawater compatibility

Measurement of conductivity in high concentration areas.

■Sensor Type: 4-electrode cell ■Measurement Range: ・Conductivity: 10µS/cm to 500mS/cm ・Salinity: 0 to 70 ・TDS: 0 to 2,000mg/L ・Temperature: -5 to 60℃ ■Cell Constant: ・K=0.917 cm-1, ±1.5% (when immersed) ・K=0.933 cm-1 (when using EBST 700-DU/N flow holder) ■Power Consumption: 0.2W ■Pressure Resistance: 10bar ■Sensor Material: ・Sensor Head: PVC ・Body: 316 Ti Stainless Steel ・Protection Rating: IP68 ■Dimensions: 357 (L) × 40 (Φ), 357 (L) × 59.5 (Φ) *for seawater compatibility ■Weight: Approximately 660g, approximately 1,170g *for seawater compatibility

Various applications in wastewater treatment plants.

<Measurement Items> CarboVis: COD, TOC, DOC, BOD, SAC, UVT, TSS (optional) NitraVis: Nitrate sensor (SS measurement possible as an option) NitraVis NI: Nitrate and nitrite sensor NiCaVis: COD, TOC, DOC, BOD, SAC, UVT, nitrate NiCaVis NI: COD, TOC, DOC, BOD, SAC, UVT, nitrate, nitrite

24/7 monitoring at low cost!

"Alyza IQ PO4" continuously measures the ortho-phosphate ions (PO₄³⁻) present in water using the spectrophotometric method (Molybdenum Yellow method). Measurement Method: Molybdenum Yellow method (wavelength 420nm) Range: Two types, low concentration and high concentration Measurement Range: MR1 (low concentration) 0.02–15.00 mg/L PO4–P MR2 (high concentration) 0.2–50.0 mg/L PO4–P Channel: Choose between 1 channel or 2 channels.