![[Video Introduction] Demo Processing](https://image.mono.ipros.com/public/premium/image_category/b8d/2296/IPROS18651451809651328079.jpeg?w=140&h=140){kind=small}
T-200A / T-200Ad Rotary Table
SPPEDIO Dedicated Option for Further Productivity Improvement
basic information
【Specifications】 ■Type■ Right-handed, Left-handed ※1 ■Center Height■ 170 mm ■Reduction Ratio■ 1/20 ■Maximum Rotational Speed■ 100 (50 ※2) min-1 ■Maximum Load Capacity■ 100 (200 ※3) kg ■Product Weight■ 61 kg ■Compatible Models■ S700X2(X1) / S500X2(X1) / S300X2(X1) S1000X1 R450X2(X1) R650X2(X1) F600X1 ※1. R450X2 (Z1) and R650X2 are only available in right-handed configuration. ※2. In high inertia mode. It can be switched to high inertia mode by changing parameters. ※3. When using a support table.
Delivery Time
OTHER
Model number/Brand name
T-200A
Applications/Examples of results
Detailed information
-
【Roller Gear Cam Mechanism】 Due to the pre-load applied to the input and output shafts, four cam followers are always held in contact with the cam surface, achieving no backlash and high rigidity. Furthermore, the rotating cam followers can efficiently transmit the motor's torque, allowing for low-torque rotation without wear even after prolonged use, and no adjustments are needed.
-
【High Productivity】 By combining a roller gear cam with an optimal motor, we have achieved high acceleration and high-speed operation. Additionally, it is possible to perform machining solely using motor torque for holding, without the use of a clamping mechanism, depending on the machining load. <Maximum Rotational Speed> 100 min-1 (0→180 degrees indexing time) Clamping Mode: 1.02 seconds Unclamping Mode: 0.45 seconds
-
【High Precision】 The pre-load applied to the cam follower achieves zero backlash. It does not adversely affect the machining surface even in machining where the rotation direction is reversed. Indexing accuracy: less than 10 seconds Reproducibility accuracy: less than 4 seconds
-
【Long lifespan】 Due to the rolling contact where the contact parts rotate, wear is significantly reduced. While worm gears require regular adjustments, roller gear cams do not need adjustments even after long-term use. Accuracy change after 18 million cycles: less than 12 seconds.
-
【High Stability】 Due to the high transmission efficiency between the input and output axes, vibrations and oscillations that tend to occur when using fixtures with high inertia or significant imbalance are virtually nonexistent, allowing for consistently high-speed and stable operation. Even when the fixtures or workpieces change, you are freed from the hassle of adjusting parameters and other settings. <Maximum Rotational Speed> Standard Mode: 100 min-1 High Inertia Mode: 50 min-1 <Tolerable Inertia> Standard Mode: 1.0 kg.m2 High Inertia Mode: 4.0 kg.m2
-
【Support Table】 We have prepared a support table necessary for the cradle jig. Clamp Torque: 330 N·m *When selecting the clamped specification.
