シーズ Official site

Introducing a panel-mounted pH recorder with upper and lower limit alarm contacts.

【Other Standard Specifications】 ■Recording Paper 　・Strip folding type 　・Folding width: 40mm, Effective recording width: 100mm, Total width: 113.5mm 　・Recording paper length: 16m (66 days at a feed speed of 10mm/h) ■Recording Paper Feed Speed 　・3-step switch: 10-20-40mm/h (gear switch) 　・Synchronous motor system ■Alarm Output 　・Upper and lower limit settings range: 0-100% 　・Transfer contact (relay contact output) 　・Contact capacity: AC250V 3A MAX (resistive load) ■Insulation Resistance: 100MΩ or more (each terminal to ground terminal) ■Dielectric Strength: AC1500V for 1 minute (power terminal to ground terminal) ■Power Supply 　・AC100 ±10% 50/60Hz (gear switch) 　・Power consumption: approximately 7VA ■Ambient Conditions: 0-40℃, 35-85% RH or less ■Installation: Panel mount type *For more details, please refer to the PDF document or feel free to contact us.

This is recording paper and replacement pen tips for the pH meter model "CER-110".

For more details, please refer to the PDF document or feel free to contact us.

It is a DIN-mounted type pH indicator and controller.

【Standard Specifications】 ■Measurement Range pH Value: 0.00–14.00 pH / Resolution 0.01 pH Temperature: 0.0–100.0℃ / Resolution 0.1℃ ■Repeatability/Linearity pH Value: ±0.05 pH ■Calibration Function 2-point automatic calibration or manual calibration ■Contact Output Communication Function: RS485 ■Temperature Compensation Element pH electrode sensor (compliant with JIS Z8802) ■Ambient Conditions 0–50℃ / 35–85% RH (provided there is no condensation) ■Power Supply 100–240V AC 50/60Hz ■External Dimensions (W) 30 mm × (H) 85 mm × (W including socket) 110 mm ■Installation Control panel / DIN rail mount type (requires separately sold socket) ※■Options 24V AC/DC specification Relay contacts: 1a × 2 contacts additional

A pH indicator and controller with a simple design that eliminates all unnecessary features and significantly reduces troubles.

【Standard Specifications】 ■Measurement Range pH Value: 0.00–14.00 pH / Resolution 0.01 pH Temperature: 0.0–100.0℃ / Resolution 0.1℃ ■Repeatability/Linearity pH Value: ±0.05 pH ■Calibration Function 2-point automatic calibration or manual calibration ■Transmission Output 4–20 mA DC (Load resistance maximum 500Ω) ■Contact Output Relay contacts: 1a×2 terminal block connection 3A 250VAC Output operation: pH, temperature (upper and lower limits), error, cleaning, pH input abnormality pH can be selected as P or ON-OFF ■Temperature Compensation Element pH electrode sensor (compliant with JIS Z8802) Thermistor Cu500Ω/25℃ or temperature element Pt100Ω/0℃ ■Ambient Conditions 0–50℃ / 35–85% RH (but must not condense) ■Power Supply 100–240V AC 50/60Hz ■External Dimensions (W) 48 mm × (H) 96 mm × (D) 98.5 mm ■Mounting Control panel or panel mount ※■Options Relay contacts: Additional 1a×2 contacts 24V AC/DC specification Communication function: RS485 Additional 1a×2 contacts

Recommended for manufacturers related to water treatment! Equipped with recording function using SD cards.

【Standard Specifications (Excerpt)】 ■ Measurement Range: 0.00–14.00 pH ■ Number of Input Points: 1 point (Glass Electrode/Antimony Electrode) ■ Calibration Function: 2-point automatic calibration or manual calibration ■ Recording Method: SD memory card (SD/SDHC standard) with 100MB built-in memory ■ Communication Specifications: 10BASE-T 10Mbps ■ Power Supply: 100–240V AC 50/60Hz, maximum power consumption 25VA ■ Operating Conditions: 0–50°C, 20–80% RH or less, no condensation ■ External Dimensions: (W) 150mm × (H) 144mm × (D) 181.3mm *For more details, please refer to the PDF document or feel free to contact us.

The Series 8014 pH electrodes from Sees are all lead-free. A wide range of products is available.

For more details, please contact us.

We clean the electrode and maintain the pH value! Introducing the pH electrode cleaning agent "Seez Mild."

【Specifications】 ! Do not mix, dangerous! ■ Ingredients - Hydrochloric acid 9.5% Surfactant (non-ionic, polyoxyethylene alkyl ether) ■ Volume - 500cc * For more details, please refer to the PDF document or feel free to contact us.

We handle a wide range of industrial chemicals, including potassium chloride powder.

For more details, please refer to the PDF document or feel free to contact us.

We handle industrial chemicals in general, including potassium chloride solution.

For more details, please refer to the PDF document or feel free to contact us.

We handle industrial chemicals in general, including standard buffer solutions for pH calibration.

For more details, please refer to the PDF document or feel free to contact us.

We handle industrial chemicals in general, including potassium chloride solutions.

For more details, please refer to the PDF document or feel free to contact us.

We handle a wide range of industrial chemicals, including standard solutions of neutral phosphate salts.

For more details, please refer to the PDF document or feel free to contact us.

We handle industrial chemicals in general, including standard buffer solutions for pH calibration.

For more details, please refer to the PDF document or feel free to contact us.

We handle industrial chemicals in general, including standard buffers for pH calibration.

For more details, please refer to the PDF document or feel free to contact us.