All products and services
31~60 item / All 118 items
-

Equipment Management Load Reduction 'RaFloM-HE'
This is a purification device that prevents dirt on equipment by continuously circulating clean cleaning solution, significantly reducing the burden of management and maintenance.
last updated
-

Prolonging the lifespan of cleaning solutions and achieving cost reduction with 'RaFloM-HE'
A fine bubble cleaning device that extends the lifespan of cleaning solutions and suppresses the generation of waste liquid and wastewater, contributing to a circular society.
last updated
-

Direct heating device for warming people: "Rapid Heating Industrial Heater"
Directly warms workers with infrared and operates only when needed using a motion sensor. By keeping moving workers comfortable, it improves the workplace environment.
last updated
-

Space-saving installation "Rapid Heating Factory Heater"
The compact heat source design allows for installation in limited spaces. It is an infrared heater that efficiently warms workers without taking up space in the factory.
last updated
-

Low-cost introduction possible "Rapid Heating Factory Heater"
This is an electric infrared heating device for factories that is easy to install, does not require steam or gas, allowing for reduced initial costs while also enabling energy-efficient operation.
last updated
-

Dust-avoiding heating "Rapid Heating Industrial Heater"
It is an industrial infrared heater designed to directly warm people without circulating air, maintaining a clean working environment without stirring up dust.
last updated
-

Instant heating in 1.4 seconds: "Rapid Heating Industrial Heater"
With a startup time of just 1.4 seconds, it instantly warms the workspace. This is a high-speed infrared heater that provides warmth instantly when a person approaches.
last updated
-

Up to 94% energy-saving "Rapid Heating Industrial Heater"
This heating device eliminates air curtains and uses motion sensors to turn off when not needed, thoroughly reducing power consumption and cutting energy costs by up to 94%.
last updated
-

Energy-saving 'Rapid Heating Industrial Heater' without steam or gas.
This is a factory infrared heater that achieves energy savings by warming only people without using steam or gas, thanks to the abolition of air curtains.
last updated
-
Customizable "High-Efficiency Induction Heating Device" with Optimal Coil Design
By combining the optimal coil shape and power supply, it is possible to adjust the temperature and heating rate of the target object. We provide induction heating equipment tailored to customer needs.
last updated
-
Zero exhaust emissions for improved work environment: "High-efficiency induction heating device"
By using electric induction heating to eliminate exhaust gas emissions and lowering the surrounding temperature, we reduce the thermal load on workers, creating a safe and comfortable working environment.
last updated
-
Productivity improvement through heating reduction: 'High-efficiency induction heating device'
This is an induction heating device that shortens heating time with high-efficiency direct heating, improving the overall efficiency of the production cycle and significantly enhancing productivity in metal processing and assembly processes.
last updated
-
CO2 reduction through heating efficiency: "High-efficiency induction heating device"
It is a high-efficiency induction heating device that can significantly reduce energy consumption and CO2 emissions by efficiently heating the target and shortening the heating time.
last updated
-
Direct heating of only the target object 'High Efficiency Induction Heating Device'
By selectively and directly heating only the necessary metal areas, the heating time is reduced. This is an induction heating device that accelerates the startup of the production line with efficient temperature rise.
last updated
-
High-precision temperature and humidity control air conditioning unit 'WETCOM II'
A wet air conditioning unit that achieves high-precision control of temperature ±0.2℃ and humidity ±2% RH, creating an environment necessary for stabilizing painting quality with high reproducibility!
last updated
-
Air conditioning unit "WETCOMII" that is easy to maintain without the need for a boiler.
This is a maintenance-free type air conditioning unit that eliminates the need for large-scale maintenance such as piping, upkeep, and heat source management, thanks to its steam-free structure that does not require a boiler.
last updated
-
Air conditioning unit "WETCOMII" that cleans outside air through water contact.
It is a wet air conditioning unit equipped with an air purification function that directly contacts a large amount of water and outside air, removing fine dust and foreign substances while purifying the air.
last updated
-
Air conditioning unit 'WETCOM II' that achieves a 70% reduction in CO2 emissions.
An air conditioning unit that achieves higher efficiency operation than steam systems by adopting a heat pump, capable of reducing CO2 emissions and running costs by approximately 70%, excelling in both environmental and economic aspects!
last updated
-
The air conditioning unit "WETCOMII" achieves high humidity without steam.
It is a high-performance wet air conditioning unit that achieves high humidification performance without steam and can stably maintain the humidity environment required for a paint booth.
last updated
-

Uniform heating for reduced heating time - "Infrared Mold Heater"
High-efficiency infrared uniform heating accelerates the startup of molds and significantly reduces heating time. This is a heating solution that directly contributes to increased productivity.
last updated
-

No construction required, easy to install: "Infrared Heater Type Mold Heater"
No large-scale construction is required, and it can be installed quickly. The electric mold preheating system can be easily integrated into existing lines, significantly improving startup efficiency!
last updated
-

Infrared Heater Type Mold Heater: Optimal for Process Automation with Stable Heating
This is an infrared mold heater that achieves optimal temperature control for automation through uniform and stable electric heating, enabling both quality improvement and CO2 reduction.
last updated
-

Achieving heat improvement with zero exhaust emissions: "Infrared Heater Type Mold Heater"
This is a mold preheating device that reduces ambient temperature and enhances heat countermeasures through electric heating with zero exhaust emissions. It can simultaneously achieve stable quality and CO2 reduction.
last updated
-

Uniform mold heating to reduce quality defects: "Infrared heater type mold heater."
Eliminate temperature unevenness with uniform infrared heating, significantly reducing quality defects. This electric mold heater also contributes to CO2 reduction and improvement of the working environment.
last updated
-

Infrared Heater Type Mold Heater that Extends Mold Life with Uniform Heating
This is a high-efficiency mold preheating system that suppresses local overheating with uniform infrared irradiation, achieving both extended mold life and stabilized quality simultaneously.
last updated
-

Contributing to significant CO2 reduction in mold preheating: "Infrared Heater Type Mold Heater"
This is a high-efficiency mold heater that significantly reduces CO2 emissions simply by switching from gas preheating to electric heating, while stabilizing mold quality through uniform heating.
last updated
-

Local overheating prevention for long-lasting pot: "Pot Preheating Heater"
Prevent local overheating of the pot with infrared uniform heating, achieving distortion suppression and stabilization of casting quality.
last updated
-

Coal-free product quality stability 'Preheating Heater for Cooking Pots'
Maintain the quality of cast products with clean heating that does not generate coal, easily ensuring uniform temperature in the ladle.
last updated
-

Zero exhaust gas for improved working environment: "Preheating Heater for Cooking Pots"
Elimination of exhaust gas loss, reduction of ambient temperature, improvement of the working environment, and realization of heat countermeasures in the casting site.
last updated
-

Automatically operable with ON/OFF operation 'Pot Preheating Heater'
Easy operation with only pot lifting and power ON, automation of settings and operations to improve efficiency in the casting site.
last updated