Peach Boy Series 【Technical Documentation】 #Sine Wave Driven Motor Driver
This is a technical document on sine wave drive motor drivers. It thoroughly explains the differences between rectangular wave drive drivers and sine wave drive drivers. #Technical Document
Compared to conventional rectangular wave drive, this is a brushless motor driver that is overwhelmingly efficient, compact, low-vibration, and low-noise. Sine wave drive is a method of driving the motor by continuously varying the current in a sine wave (sinusoidal) shape. When viewed on an oscilloscope, it is characterized by a clean sine wave, and because it approximates the induced voltage, it is more efficient compared to rectangular wave drive.
basic information
Sine wave driven brushless motors detect the rotor position and create a rotating magnetic field by varying the voltage of the coils in a sine wave pattern according to the rotor's rotation angle, thereby rotating the rotor. By continuously applying sine wave voltage to the coils in synchronization with the rotation, the rotor can be rotated continuously. Rectangular wave driving is the simplest driving method, where the ON/OFF state of the power elements is switched according to the rotor's rotation angle, changing the current direction in the stator coils to rotate the rotor. When the rotor completes one full rotation (360 degrees), the current direction is switched 6 times (every 60 degrees). This method is the same as the driving principle of brushed DC motors. The motor is driven using an inverter circuit that controls the voltage with PWM. This method is the most commonly adopted for driving sensorless motors. (Toshiba Device & Storage Corporation https://toshiba.semicon-storage.com/jp/top.html)
Price range
Delivery Time
Model number/Brand name
Momotaro Series
Applications/Examples of results
The speed of a brushless motor is adjusted by changing the voltage. By increasing the voltage and raising the frequency of the drive command waveform, the rotational speed increases. If only the frequency of the drive command waveform is increased, the rotor will be unable to keep up with the rotation and will stop. Additionally, if only the voltage is increased, the rotor will spin faster, but if the frequency of the drive command waveform is too slow, the rotor will also stop. Therefore, adjustments to both the voltage and the drive command waveform are necessary. (The frequency of the drive command waveform for the brushless motor is determined by the detection of the rotor's position.) (Toshiba Device & Storage Corporation https://toshiba.semicon-storage.com/jp/top.html)
