One of the largest lineups in the industry. MPC/MPX is the de facto standard. With male and female aseptic connections, suitable for ultra-small to large plants, and features like one-touch aseptic connections and detachments, this single book allows for complete freedom in connecting bioprocesses!

The PLQ2 connector, designed using high-performance thermoplastic, is lightweight, highly resistant to chemicals, flame-retardant to UL94 V-0 standards, easy to use, and ideal for liquid cooling in electronic products. These innovative connectors enable high flow rates to optimize liquid cooling systems. The PLQ2 series was developed using CPC's valve technology, designed to prevent liquid leakage and sticking, ensuring durability for long-term use.

We are pleased to announce the new connection type G thread/BSPP for the LQ2, LQ4, and LQ6 series. This product is scheduled to be released on December 6, 2018. G thread/BSPP is a parallel thread with a 55° thread flank angle (60° thread groove angle) according to the Whitworth thread standard. The parallel thread, originating in Germany, is represented by G for gas. The thread standard complies with ISO 228, and the plugs and ports follow ISO 1179. While metal-to-metal sealing is described in the standard specifications, the most common sealing method for liquid cooling applications involves rubber seals. Sealing O-rings are either on the outer circumference or directly incorporated into the connection. While being tightened onto the port, the O-ring is compressed into the gap formed between the port body, the inside of the metal ring, and the body.

The air bed fitting catalog was previously only available in English, but a new Japanese version has been created. The shut-off valve in the fitting can minimize air leakage from the air bed.

A catalog of fittings used for connecting to bottles in pesticide spraying systems. The catalog for fittings for pesticide spraying systems was previously only available in English, but a new Japanese version has been created.

In addition to boats, also for marine jets (personal watercraft). The catalog for boat engine maintenance fittings was previously only available in English, but a Japanese version has now been created.

The catalog for connectors used in dialysis systems was previously only available in English, but a Japanese version has now been created. Dialysis System Connector Catalog It has numerous approval records in Japan, the United States, and Europe. It uses plastics that have been confirmed for safety, such as USP Class VI, and is economically priced even for disposable use. The one-touch button allows for easy attachment and detachment with one hand, even while wearing gloves. It also prevents incorrect connections with luer locks. A clicking sound indicates a secure connection when connected. It is manufactured in a clean room.

2-4-32 Aomi, Koto-ku, Tokyo, Time 24, 5th floor, South Building-5 At the showroom of Sanwa Enterprise Co., Ltd., we will showcase the joint for cool vests. Please feel free to contact us. For those coming to Time 24 by train: Yurikamome Get off at "Telecom Center" Station, about a 2-minute walk Shinbashi (JR, Tokyo Metro, Toei Subway) ← 18 minutes → Telecom Center Toyosu (Tokyo Metro) ← 12 minutes → Telecom Center

Aseptic Quick L Connector with no distinction between male and female You can watch the video from the link below. Aseptic Quick L Assembly Image Link https://www.youtube.com/watch?v=vwEb9YkuAn0 Aseptic Quick L Handling Supplementary Explanation https://www.youtube.com/watch?v=ZI4QYqFXYDU It enables rapid and easy high-flow aseptic connections even in general environments. The large tube diameters of 3/4 inch (19.0 mm) and 1 inch (25.4 mm), along with the shape that has no distinction between male and female, simplify the system and reduce the risk of incorrect connections. Its robust structure eliminates the need for clamps, fixtures, or welding with tubes. It can be used with the quality expected from the single-use connection technology industry by accommodating interchangeable 3/4 inch and 1 inch flow applications in large-scale bioprocess manufacturing for biopharmaceutical production. For more details, please contact the CPC Japan office.

The new IdentiQuik MAR allows for the connection of up to eight RFID readers consolidated into a single interface. It simplifies the system with a multi-antenna RF (radio frequency) communicator, reducing the risk of misconnection. **Features of IdentiQuik MAR** - Simplifies system design by controlling multiple lines with a single interface, making the installation of devices such as tags and readers easy. - Streamlines liquid handling procedures and transmits liquids and information to their respective flow paths. - The size of a single device is approximately 6x10x2.5 centimeters, making it easy to install even in spaces with limited installation area. - Uses a standard PLC12 wall-mountable body and RFID-enabled insert, allowing existing customers to easily add RFID functionality to their current equipment.

CPC plans to enhance the product features of the AseptiQuik product group. The surface of the AseptiQuik connector will display a visible part number, batch number, and data code (2D data matrix barcode). This data code can be scanned using various QR code scanners, data matrix scanners, and barcode scanners. By scanning the code, users can access the product number, batch number, manufacturing date, and a URL with detailed product specifications. By clicking this URL, users can view detailed technical data about the product, including materials, pressure/temperature ratings, sterilization compatibility, as well as videos on assembly procedures and optimal usage. Additionally, users can request validation reports or ask questions to technical personnel through this URL. There will be no changes to the design or functionality of the connector. The part numbers related to this change are: AQS17MPC, AQS17002HT, AQS17MPCHT, AQS17004, AQS33012, AQS17004HT, AQS33012HT, AQS17006, AQS17002, AQS17006HT.

We offer a variety of nuts compatible with UN (Unified) screws in different materials. Nuts compatible with 1/2-24 UNS (Unified National Special) and 11/16-24 UNEF (Unified Extra Fine Series) are available in polypropylene, brass, acetal, and stainless steel. The 7/1-24 UNS (Unified National Special) is made of brass.

This is a coupling joint with a patent-pending anti-seizing structure. It is designed to prevent accidents such as valve leaks or disconnections due to seizing, even after long periods of connection. The LQ2 features a compact, non-spill design that minimizes liquid drippage during attachment and detachment, with very little air entrapment. By preventing seal seizing, this highly reliable product is ideal for liquid cooling in supercomputers and precision equipment. Additionally, it is effective in preventing seal material seizing caused by fluorinated cleaning agents and coolants (such as Fluorinert and Iceon).

Sample kit convenient for connector verification and structural confirmation during prototyping. This kit contains samples for understanding various CPC joints. Product contents: MPC Polycarbonate, MPC Polysulfone, MPX Polycarbonate, MPX Polysulfone, HFCD Polysulfone, MPU Polysulfone, Back to Back Adapters, Steam Through, SaniQuick, AseptiQuick C, AseptiQuick G, AseptiQuick S Plastic box (with internal compartments)

The DTLD series, which can be operated with one hand, allows for easy, separate, and quick connection of two flow paths. The DTLD series is compatible with all PLC, PLC12, and LC series.

The DPC series consists of a single plastic button and connectors with and without valves. It allows for easy simultaneous connection and disconnection with one hand where two flow paths are required. - Single button: Easily connects two flow paths in one step. - Anti-reverse key: Confirms the correct direction of flow. - Compact and standardized design: Enables a high-quality appearance and flexible configuration. - Integrated connector: Reduces the number of components, shortening assembly and installation time.

Easily and safely connect the blood pressure monitor cuff and monitor. Can also be used as an alternative to metal connectors. The Japanese catalog can be viewed on the catalog page within Ipros.

Adopted by the world's largest coffee chains and used globally. When handling smoothies, shakes, sauces, and pastes, bacteria will inevitably proliferate over time. To prevent food poisoning, steam sterilization, boiling water sterilization, and bleach (sodium hypochlorite) disinfection are essential. The joint that can repeatedly perform these sterilization, disinfection, and sanitation processes is the HFC35 & HFC57 joint, which uses a super engineering plastic called polysulfone. Since the main body is made of resin, it does not rust, helping to prevent contamination of food with rust (iron debris). Furthermore, its low thermal conductivity contributes to safety measures by preventing employee burns. Its high insulation properties compared to metal make it excellent for maintaining the temperature of high-temperature steam, boiling water, and cold water, also contributing to energy savings.

Medical fittings (joints, couplings, connectors) PMC12 for wall-mounted inserts have been released. You can choose from two types of connection shapes with or without a valve, and three different inner diameters.

This is a rack mount coupling joint with a patented anti-seizing structure. It is designed to prevent accidents such as valve leaks or disconnections due to seizing, even after long periods of continuous connection. The RPLQ4 features a compact non-spill design, resulting in nearly zero liquid dripping during attachment and detachment, with minimal air entrapment. By preventing seal seizing, this highly reliable product is ideal for liquid cooling of supercomputers and precision equipment. Additionally, it is effective in preventing seal material seizing caused by fluorinated cleaning agents and coolants (such as Fluorinert and Iceon).

We have released a drum insert (DrumQuikPRO BCS 70mm Drum Insert) that can be used with standard drums in Japan. It allows for transportation with the dip tube attached as part of the drum (see photo) and can be easily connected to a CPC connector for the safe and quick transfer of chemicals.

From January 28 to 30, 2015, we will jointly exhibit with Sanwa Enterprise Co., Ltd. at the Inter Aqua 2015, the 6th International Water Solutions Comprehensive Exhibition, held at Tokyo Big Sight Hall 1. We will showcase key products from over 8,000 items, and visitors will also have the opportunity to experience our spill-proof non-spill fittings.

This is a coupling or fitting integrated with a cap for a 45GL bottle. The BQ45GL series features a hydrophobic vent, a polyethylene gasket, and a bamboo shoot-shaped protrusion for attaching a dip tube. By adding a quick disconnect connector to the bottle, it becomes easier and safer to replace consumables used in experiments.

This is a coupling joint with a patent-pending anti-seizing structure. It is designed to prevent accidents such as valve leaks due to seizing or disconnection, even after long-term connections. The LQ4 features a compact, non-spill design, resulting in nearly zero liquid dripping during attachment and detachment, with minimal air entrapment. By preventing seal seizing, this highly reliable product is ideal for liquid cooling in supercomputers and precision equipment. Additionally, it is effective in countering seal material seizing caused by fluorinated cleaning and cooling fluids (such as Fluorinert and Iceon).

This is a coupling joint with a patented anti-seizing structure currently under application. It is designed to prevent accidents such as valve leaks or disconnections due to seizing, even when connected for long periods. The LQ4 features a compact, non-spill design that minimizes liquid drippage during attachment and detachment, with very little air contamination. By preventing seal seizing, this highly reliable product is ideal for liquid cooling in supercomputers and precision instruments. Additionally, it is effective in countering seal material seizing caused by fluorinated cleaning and cooling fluids (such as Fluorinert and Iceon).

This is a coupling joint with a patented anti-seizing structure currently under application. It is designed to prevent accidents such as valve leaks or disconnections due to seizing, even after long-term connections. The LQ4 features a compact, non-spill design, resulting in nearly zero liquid drippage during attachment and detachment, with minimal air entrapment. By preventing seal seizing, this highly reliable product is ideal for liquid cooling in supercomputers and precision equipment. Additionally, it is effective in countering seal material seizing caused by fluorinated cleaning and cooling fluids (such as Fluorinert and Iceon).

CPC Coldar Products Company, which holds an overwhelming share in the joint manufacturing of biopharmaceuticals, has launched a new product, the MPC/MPX Male x Male and Female x Female Joint Adapter. * Made of polysulfone and polycarbonate * For connecting different diameters of MPC/MPX, tube sizes can also be converted Part NO. Details Material MPC22C2239M MPC-MPC Polysulfone MPC22X2239M MPC-MPX Polysulfone MPX22X2239M MPX-MPX Polysulfone MPC17C1703 MPC-MPC Polycarbonate MPX17X1703 MPX-MPX Polycarbonate MPC17X1703 MPC-MPX Polycarbonate MPC17C1739 MPC-MPC Polysulfone MPX17X1739 MPX-MPX Polysulfone MPC17X1739 MPC-MPX Polysulfone

We will jointly exhibit with Sanwa Enterprise Co., Ltd. at Inter Aqua 2014, the 5th International Water Solutions Comprehensive Exhibition, held at Tokyo Big Sight Hall 4 from January 29 to 31, 2014. We will showcase key products from over 8,000 items, and you can also experience our drip-proof non-spill fittings.

Alam Co., Ltd. and CPC Colder Products will jointly exhibit at the Technical Show Yokohama 2014, held at Pacifico Yokohama from February 5 to 7, 2014. Key products will be displayed from over 8,000 items, and attendees will also have the opportunity to experience the drip-proof non-spill fittings.

From February 26 to 28, 2014, Sanwa Enterprise Co., Ltd. and CPC Coldwater Products will jointly exhibit at Wind Expo 2014, the 2nd International Wind Power Exhibition, held at Tokyo Big Sight. Key products will be displayed from over 8,000 items, and there will also be an experience of the liquid spill prevention non-spill fittings.