Battery charger "NPP-450, 750, 1200, 1700"
【 NEW 】High-performance battery charger integrated with a power supply.
The NPP series is a 2-in-1 designed device that allows the use of both battery charger mode and power supply mode in a single unit. It can be used not only as a battery charger but also as a constant voltage output power supply to drive general loads. The system is not complicated and is a product that can be adopted for many applications. 【Features】 - 2-in-1 design: selectable battery charger mode / power supply mode - Maximum efficiency of 94% - Wide input voltage range AC90V to AC264V - Noise reduction measures with thermal control DC fan - Selectable charging methods (2-stage charging, 3-stage charging) - Built-in CANbus protocol (for control, setting, and monitoring) - Adjustable charging voltage and current via VR - Operating status signal, battery monitoring signal, remote control, and temperature sensor circuit included - Wide operating temperature range: -30℃ to +70℃ - Various protection circuits included - Certifications: UL / DEKRA / CB / EAC / AS/NZS / CE / UKCA *Currently preparing to obtain PSE certification. Models 1200 and 1700 are not subject to PSE certification. For detailed product information, please visit our website.
basic information
【 Power Mode 】 In power mode, in addition to the battery, you can connect a load, allowing for charging while also supplying power to the load. This mode does not bring the battery to a low voltage state, and since it can provide a stable supply to the load, it can be a suitable mode depending on the system. 【 Lineup 】 - NPP-450-12JP - NPP-450-24JP - NPP-450-48JP - NPP-450-72JP - NPP-750-12JP - NPP-750-24JP - NPP-750-48JP - NPP-1200-12JP - NPP-1200-24JP - NPP-1200-48JP - NPP-1700-12JP - NPP-1700-24JP - NPP-1700-48JP The dimensions and weight vary. For more details, please visit our website. The NPP-450, 750, 1200, and 1700 Series each have additional features. Please check our website for detailed product information.
Price range
Delivery Time
Applications/Examples of results
- Integrated power supply unit for chargers - Chargers for lead-acid batteries and lithium-ion batteries - Portable power supply unit - Chargers for electric wheelchairs, picking cart chargers, chargers for small electric robots, chargers for medical robots, measurement equipment battery system chargers, UPS systems, automotive battery chargers, agricultural equipment battery chargers, industrial equipment battery chargers - Robot systems, backup power systems, monitoring systems - Special vehicles, specialty vehicles, vans, buses, industrial equipment, communication equipment, communication signals, audio equipment, power supply systems and so on.
catalog(6)
Download All CatalogsNews about this product(5)
-

Introduction to the NPB Series, compatible with lead-acid batteries and lithium-ion batteries, capable of adjusting current and voltage to meet the requirements of various types of battery devices.
Powerful performance battery charger - NPB Series is here!!! This high-performance product is compatible with lead-acid batteries and lithium-ion batteries, meeting the needs of various battery devices. The charging range is adjustable from 10.5 to 60.8V, and the charging current (rated current 50-100%) can also be freely adjusted. Additionally, it features an LED function that allows for instant assessment of the charger's status based on the color and state of the LED. It is equipped with various other functions as well. For detailed specifications and features, please refer to the PDF document or feel free to contact us.
-

The "NPP Series" battery charger can also be used as an AC-DC constant voltage output power supply! It allows for charging while supplying power to the load! It can be used for various applications with full charging and stable supply.
Battery Charger "NPP Series" This product is equipped with two modes: battery charger mode and power supply mode. In battery charger mode, it performs excellently as a charger by utilizing stage charging! However! In power supply mode, it is possible to provide stable DC output while charging the battery and connecting a load to the unit! In the "3-stage charging" of the charger mode, it transitions from bulk charging to absorption charging and then to float charging. However, if a minimal load such as 5A is used, it may not transition to float charging and the charging will stop (it will not reach full charge). However, by using power supply mode, it can achieve a full charge while also providing stable power to the load. Once the battery is fully charged, it will only supply power to the load. By disconnecting the battery, it can also be used as an AC-DC power supply. For more details, please visit our website or view the catalog below.
-

Aren't you using a charger that has been unofficially customized? That is considered unregulated and the seller is also committing the same violation!
We are Earth Power Co., Ltd. Recently, robots and AGVs have been widely adopted and produced in Japan. Such robots and AGVs always require battery chargers, and we receive many inquiries about this at Earth Power. Q. Are there any battery chargers for unmanned transport vehicles that are safe to use and have obtained PSE certification? This is the question. Earth Power has also obtained PSE certification, so you can use our products without any issues. However, it seems that other manufacturers, in their attempt to produce at a low cost, have created products that do not meet the standards or lack after-sales service, leading to many problems. While it is understandable to prioritize "cost," it is important to note that the issues arising from focusing too much on cost can actually end up being more expensive. Regarding this issue, our battery chargers are shipped only as normal products, and we can provide certification documents. We also conduct warranty and repair analysis domestically. We have a wide range of products, so please visit our website for more details. Please note that this news may also have implications beyond just chargers.
-

Did you know that there are battery chargers that can also function as AC-DC power supplies?
2-in-1 Design (Battery Charger Mode / Power Supply Mode) Battery Charger 【 NPP Series 】 This newly released product, launched in April 2022, has the main feature of being able to provide stable power supply while charging. Traditional battery chargers only function as "chargers," but this product can be used as an AC-DC power supply in addition to its charging capabilities by switching modes. Product information is available on Ipros and our website. Please check the URL below.
-

【New Release】New Battery Charger NPP Series - A battery charger integrated with a power supply. This high-performance battery charger can provide stable power to the load while charging the battery.
This time, we would like to introduce the NPP-450, 750, 1200, and 1700 Series. Starting from April 2022, we will officially launch the new battery charger NPP-450, 750, 1200, and 1700 Series, which features a 2-in-1 design that allows for both battery charger mode and power supply mode to be used in a single unit. It can be utilized not only as a battery charger but also as a constant voltage output power supply to drive general loads. The system is not complicated, making it suitable for a wide range of applications. 【Examples of Applications】 - Chargers for AGVs, electric bikes, picking robots, and avatar robots - Chargers for lead and lithium-ion batteries - Power supply units integrated with chargers - Chargers for special vehicles, specialty vehicles, vans, and buses - Chargers for systems integrated into backup power systems and monitoring systems It can be adopted for many applications. For detailed product information, please refer to the catalog or our company website. If you have any questions about the product or the system, please feel free to contact us.
Recommended products
Distributors
Earth Power Co., Ltd. is engaged in the sale of independent power systems and independent power equipment. Comprehensive quality assurance is managed under the quality control of MEAN WELL ENTERPRISES CO., LTD., a major manufacturer of switching power supplies in Taiwan, ensuring that products meet strict standards for our customers in Japan. We hold the sales rights for MEAN WELL products' DC-AC inverters and battery chargers, and verification is conducted via serial numbers during acceptance inspections. In addition to our corporate website and online store, we have newly launched a product site focused on control panels and lighting fixtures (manufacturing site: https://ep-monozukuri.site), and we are currently operating three service sites. The corporate site primarily features corporate information, including announcements related to the company, and includes a detailed and comprehensive inquiry form. Our online store offers PDF data of specifications, test reports, and explanations of acquired standards for members only, so we hope you can utilize each site according to your needs and purposes.






































