All products and services
1～30 item / All 71 items
-
Power supply for driving electric distortion elements "ENP-6032B type"
Capable of driving high current at high voltage. Designed to minimize noise voltage included in the output voltage as much as possible.
last updated
-
Power supply for driving electric distortion elements "ENP-5014B type"
Consists of four independent DC amplifiers and the power supply that drives them, a manual signal synthesis circuit from XYZ, and a reference voltage generator.
last updated
-
Power supply for driving electric distortion elements "ENP-3052B type"
To minimize the micro-movements caused by probe noise, reduce the noise voltage contained in the output voltage as much as possible.
last updated
-
High Voltage Electromagnetic Distortion Element Drive Power Supply 'ENP-10021'
High output of 1000V and 200mA! The maximum output voltage can be set according to the maximum rating of the load.
last updated
-
High Voltage Electromechanical Element Drive Power Supply 'ENP-10011'
Equipped with low-speed startup and load short-circuit protection circuit! Suitable for various piezoelectric actuators.
last updated
-
Pulse Scan Controller "ENP-4015BH"
It can be used as a power supply for driving electric distortion elements and as an AC power amplifier.
last updated
-
Piezo Driver "ENP-4015B"
Ideal for stacked low-voltage piezoelectric actuators! Can also be used as an AC power amplifier.
last updated
-
3-channel electric distortion element drive power supply "ENP-2033"
By blocking the output DC with a capacitor, it becomes a wideband AC amplifier.
last updated
-
1-5 channel electric distortion element drive power supply 'ENP-401_B'
Amplification up to 20 times is possible with large amplitude drive! It can be set arbitrarily up to 20 times with semi-fixed adjustment.
last updated
-
Power supply for driving electric distortion elements "ENP-152"
The maximum output voltage can be set according to the maximum load specifications.
last updated
-
Unit-type electrostrictive element drive power supply "ENP-151U"
Design considering computer control! It can be used for high-precision positioning applications.
last updated
-
Pulse-compatible Amplifying Piezoelectric Power Supply 'ENP-0151A'
Capable of driving large amplitudes of 0 to 150V with a gain of 15 times! Built-in overcurrent protection circuit.
last updated
-
Unit-type electrostrain element drive power supply "ENP-150U"
Compact, lightweight, and high output! Usable as an experimental power supply controllable by external voltage.
last updated
-
Power supply monitor unit for driving electric distortion elements 'ENP-50U'
It has a switching function for 4 channels or 8 channels! Remote display is possible.
last updated
-
Built-in signal source high-speed switch piezoelectric power supply 'ENP-015SE'
Remote operation and configuration via Ethernet is possible. Drive voltage corresponding to pulse width is supplied.
last updated
-
Pulse-compatible high-speed switch type piezoelectric power supply 'ENP-015S'
Drive piezoelectric elements at high speed with a 2-input pulse wave. Capable of large amplitude drive from 0 to 150V.
last updated
-
ENP-015A-
Pulse waves determine the average current with the repetition frequency and the peak charging and discharging current, allowing for a flow of up to 100mA.
last updated
-
Pulse-compatible Amplifying Piezo Power Supply 'ENP-015A'
Designed with a larger peak power supply to accommodate pulse waves! Capable of driving large amplitudes.
last updated
-
High Voltage Power Supply for Bipolar Amplifier 'EBP-100'
It is equipped with a protection circuit that cuts off AC 100V in response to abnormal heat generation of the heat dissipation plate.
last updated
-
Dedicated Electromagnet Power Supply "EMS-100154 Type"
Equipped with a safety device that automatically cuts off with an internal temperature sensor during abnormal heating!
last updated
-
Experimental small magnet 'EM-112150P'
By varying the pole piece gap, any magnetic field strength can be set!
last updated
-
Experimental Small Electromagnet "EM-46040 Type"
Even though it is compact and lightweight, it generates a maximum magnetic field of 0.4T! It maintains a highly stable magnetic field with a water cooling system.
last updated
-
Experimental Small Electromagnet "EM-40050 Model"
Ensuring a wide magnetic field uniformity! Maintaining a highly stable magnetic field with a water cooling system.
last updated
-
Small Electromagnet "EM-25030C Type"
Equipped with handles for easy transportation, it can be moved effortlessly! Despite its small size and lightweight, it generates a maximum magnetic field of 0.4T.
last updated
-
Small Electromagnet "EM-21040C Type"
Wide magnetic field uniformity that can be used for various NMR experiments, Hall element calibration, etc.!
last updated
-
Experimental Small Electromagnet "EM-20100 Type"
It has sufficient heat capacity, so water cooling is unnecessary! High-performance electromagnetic magnet of the Bitter type.
last updated
-
Experimental Small Electromagnet "EM-15055 Type"
Wide magnetic field uniformity secured for various NMR experiments and calibration of Hall elements!
last updated
-
Small magnet "EM-11050P/20030P/05070P type"
Three types of magnetic field strengths can be selected due to the pole piece gap! No need for water cooling, etc.
last updated
-
Wais-type Electromagnet "EM-0505WV"
Water-cooled system that maintains stable magnetic field strength! Accessible from either the front or back of the top with a Weiss-type yoke structure.
last updated
-
Small Magnetic Field Generation Device "EM-400BP/EMS-10015BP Model"
Wide magnetic field uniformity is ensured, making it suitable for various NMR experiments and Hall element calibration!
last updated