エスペック Official site

New standard for dedicated charging and discharging constant temperature chambers.

【Specifications (Excerpt)】 ■Airflow Direction 　・Horizontal Airflow 　・Vertical Airflow ■Temperature Range: -40 to +100℃ ■Volume: 560 liters *There is also a 1120L type available. *For more details, please refer to the PDF document or feel free to contact us.

We leverage our years of experience and achievements to provide comprehensive support for our customers' reliability testing.

Low Temperature Test / Cold Resistance Test High Temperature Test / Heat Resistance Test Temperature and Humidity Cycle Test Temperature Cycle Test Altitude Test / Decompression Test Condensation Cycle Test (Humidity and Thermal Test) Pressure Cooker Test (HAST Test) Conductor Resistance Evaluation Test Insulation Resistance Evaluation Test Vibration Test Combined Environmental Test (Temperature and Humidity + Vibration) HALT/HASS Test Salt Spray Test Salt Spray Combined Cycle Test Sand and Dust Test Chemical Resistance Test

Significantly reduced power consumption! The Platinum J Series constant temperature and humidity controller is reliable even when operating 24 hours a day.

For more details, please refer to the PDF document or feel free to contact us.

Performance testing, durability testing, temperature characteristic testing, and impedance evaluation achieved with a single device!

【Features of Each Function】 ■Chamber - The test area circulates with horizontal laminar flow. - The three-tank type has lateral exhaust, while the single-tank type has rear exhaust. Designed to ensure a uniform temperature environment even when batteries are installed, considering the position of the battery holder and the arrangement of the batteries. - Various safety specifications such as pressure relief vents, CO2 extinguishers, and gas detectors are available as options. ■Power System - Voltage up to 6V, current ranging from a minimum of 1mA to a maximum of 1600A, covering a wide range including high-speed, high-current evaluations for automotive batteries. - Impedance measurements can be performed during specified cycles of charge and discharge cycle testing. ■Battery Holder - Dedicated battery holders are provided. The test setup can be done with one touch, preventing electric shock and battery damage due to short-circuit currents during operation. - Capable of recording the temperature of each cell and outputting temperature alarms. - Battery holders and fixtures are designed to match the customer's batteries. ■Calibration of Power System - An automatic calibration board is available as an option. - Issuance of traceability system diagrams and calibration certificates is also possible.

Contributing to the reduction of greenhouse gas emissions with the standard adoption of low GWP refrigerant "R-449A"!

【Other Features】 ■ Smooth wick replacement work ■ Easy filter cleaning ■ Device management with door locking ■ Lifespan evaluation and insulation resistance evaluation as well *For more details, please download the PDF or feel free to contact us.