エスペック Official site

"All-weather testing lab" that realizes the "dynamic weather environment" of sensing devices. We contribute to solving challenges in advanced technology with environmental creation technology.

For more details, please feel free to contact us.

Added a new "tip heater type" with a temperature change rate of 100°C/min to streamline the temperature characteristic evaluation of semiconductors and electronic devices.

【Specifications (Excerpt)】 ■ Blowout Temperature Control Range -40℃ to +180℃ ■ Temperature Variation at Steady State (Tip Heater Type) ±1.0℃ (Rear Heater Type) ±0.5℃ ■ Rate of Temperature Change (Increase: -29℃ to +169℃, Decrease: +169℃ to -29℃) (Tip Heater Type) 100℃/min (Rear Heater Type) 10℃/min ■ External Dimensions W502×H1263×D652mm *Performance data measured using the standard outlet at an ambient temperature of 23℃, ambient humidity of 65%, rated voltage, air flow rate of 170L/min, compressed air temperature below 30℃, and compressed air dew point temperature below -60℃.

Compact yet high-performance, achieving efficient environmental testing through networking.

Temperature and humidity range: -60 to +150°C / 30 to 95% rh Internal dimensions: W300×H300×D250 (22.5L) W400×H400×D400 (64L)

Check driving conditions from remote offices or home! You can manage the surroundings of environmental testing devices all at once.

**Features of Espec Online Core** ■ Centralized Management Monitor - Check the operating status and measurement values of connected devices - Up to 100 environmental testing devices, measuring instruments, network cameras, etc. can be connected - Compatible with environmental testing devices from other manufacturers - The status of connected devices is displayed in color (customizable) - The arrangement, display format, and size of connected devices on the monitor can be changed ■ Schedule Management - Manage the schedules of testing devices registered in Espec Online Core *For more details, please refer to the PDF document or feel free to contact us.*

We leverage our years of experience and achievements to provide comprehensive support for our customers' reliability testing.

Low Temperature Test / Cold Resistance Test High Temperature Test / Heat Resistance Test Temperature and Humidity Cycle Test Temperature Cycle Test Altitude Test / Decompression Test Condensation Cycle Test (Humidity and Thermal Test) Pressure Cooker Test (HAST Test) Conductor Resistance Evaluation Test Insulation Resistance Evaluation Test Vibration Test Combined Environmental Test (Temperature and Humidity + Vibration) HALT/HASS Test Salt Spray Test Salt Spray Combined Cycle Test Sand and Dust Test Chemical Resistance Test

For high-temperature testing and heat treatment/drying on the production line.

(Outside temperature + 20) °C to +200 °C (Outside temperature + 20) °C to +300 °C