EXSEAL CO., LTD. Head office Official site

Measures against foreign matter contamination in food factories! Thorough removal of dirt from shoe soles!

【Features】 - Removes over 90% of dirt from shoe soles - Contains antibacterial and anti-mold agents - Washable and reusable - Compatible with carts up to 100kg - Suitable for floor covering 【Our Strengths】 Exile specializes in product development that leverages the properties of polyurethane gel. We propose products tailored to our customers' challenges, starting from a single prototype.

Contributing to the SDGs! A reusable sticky mat that produces no waste, 'Step Mat' [Free samples available!]

Conventional peel-off adhesive mats can cause dust that has been collected to scatter when peeling off the sheets, and disposing of the sheets incurs costs. However, the step mat uses water to wipe away dirt, preventing dust from scattering, allowing for repeated use, and generating no waste. 【Expected Effects】 - Simply walking on the mat removes dirt and dust attached to wheels. - It captures dust that is scattered in the air, preventing it from rising when people or vehicles pass by. - It removes contaminants that enter from the ground, keeping the workspace clean, which is essential for areas that dislike dust and foreign objects. 【Suitable Installation Locations】 Since it is installed with gel adhesive, double-sided tape is not required. It is suitable for coated or resin floors. - Factory corridors (can also be used for carts with tires weighing around 100 kg) - Inside air showers, ante-rooms - Entrances to workspaces and changing rooms, etc. 【Unsuitable Locations for Installation】 - Areas with a lot of water or oil (the mat can become slippery and dangerous) - Outdoor areas or direct entrances from outdoors where heat and UV exposure are significant - Areas with excessive dirt - Areas with large, hard, sharp debris such as stones or metal fragments - Floors with uneven concrete or asphalt surfaces

[Free Sample] Removes over 90% of dirt and dust from shoe soles and tires! Introducing the reusable "non-flipping" adhesive mat.

【Important Points of the Step Mat】 ■ Over 90% Removal Rate! The soft material adheres closely to the soles of shoes, removing over 90% of dirt. *Results from in-house ATP (+AMP) wipe tests. ■ Wash Away Dirt with Water! Wiping with water restores adhesion, allowing for repeated use. Contributes to reduced running costs and waste. ■ Suitable for Floor Coverage Can be laid out in changing rooms and air showers, among other places. ■ Contains Flame Retardants In addition to conventional antibacterial and anti-mold agents, flame retardants have been added. This product meets the flame retardant standard UL94 V-2. 【Suitable Installation Locations】 No double-sided tape is needed for installation due to the gel's adhesion. Suitable for coated or resin floors. - Factory corridors (can also be used for carts weighing around 100 kg) - Inside air showers, anterooms, workrooms, entrances to changing rooms, etc. 【Unsuitable Installation Locations】 - Areas with a lot of water or oil (can become slippery and dangerous) - Outdoor areas or direct entrances from outdoors that are significantly affected by heat or UV rays - Areas with excessive dirt - Areas with large, hard, sharp debris such as stones or metal fragments - Floors with uneven concrete or asphalt surfaces

Are you bringing foreign objects into the clean room and manufacturing process? Adhesive mats that remove over 90% of dirt from shoe soles [Samples available now!]

The step mat adheres closely to the fine irregularities of shoe soles with its soft gel material, capturing over 90% of dirt and dust from the soles. It thoroughly reduces the introduction of foreign substances. 【Expected Effects】 - Just stepping on the mat three times removes dirt and dust attached to the shoe soles. - It captures dust that is dispersed in the air, preventing it from being stirred up when people or carts pass by. - It removes contaminants that enter from the feet, keeping the workspace clean, which is sensitive to dust and foreign substances. 【Installation Locations】 ○ Coated floors and resin floors (depending on the environment) ○ Changing rooms ○ Inside air showers, ante-rooms, etc. × Areas with a lot of water or oil × Outdoor areas significantly affected by heat or ultraviolet rays, or direct entrances from outdoors × Areas with excessive dirt × Locations where large, hard, sharp debris like stones or metal fragments are prevalent × Floors with uneven concrete or asphalt surfaces, etc.

How do you deal with tire dirt indoors? A sticky mat that removes over 90% of the tire dirt from hand trucks just by passing over it, washable and reusable!

Until now, the tire dirt of indoor transport vehicles used for product shipping and raw material delivery has been difficult to address and was almost defenseless. The lift mat, made of thick and high-strength gel, reduces the risk of entanglement and tearing, keeping the factory floor clean. ■ Suitable Installation Locations Since it is installed with gel adhesion, double-sided tape is not required. Coated or resin floors are suitable. - Aisles for indoor forklifts - Inside air showers for indoor vehicles, anterooms, etc. ■ Expected Effects - Simply passing over the mat with lifts will remove dirt and dust attached to the wheels. - It adsorbs dust that is dispersed in the air, preventing it from being stirred up when people or vehicles pass by. - It removes contaminants that enter from the ground, keeping the work area clean, which is sensitive to dust and foreign substances. ■ Unsuitable Installation Locations - Areas with a lot of water or oil (the mat becomes slippery and dangerous). - Outdoor areas or direct entrances from outside that are significantly affected by heat or ultraviolet rays. - Areas with excessive dirt. - Areas with many large, hard, sharp debris such as small stones or metal fragments. - Floors with uneven concrete or asphalt surfaces.

How do you deal with tire dirt from indoor transport vehicles? A reusable adhesive mat that removes 90% of forklift tire dirt just by passing over it!

Until now, the tire dirt of indoor transport vehicles used for product shipping and raw material delivery has been difficult to address and was almost defenseless. The lift mat, made of thick and highly durable gel, minimizes the risk of entrapment and tearing, keeping the factory floor clean. 【Expected Effects】 - Simply passing over the mat with a lift or similar equipment removes dirt and dust attached to the wheels. - It absorbs dust suspended in the air, preventing it from being stirred up when people or vehicles pass by. - It keeps the work area, which dislikes dust and foreign objects, clean. 【Cleaning Method】 Wet the surface of the mat thoroughly with a dedicated detergent or water, and wipe away dirt with a damp cloth or mop. 【Required Size and Usage Duration】 - Length sufficient for three wheel rotations - 1 to 2 years (depending on usage environment and traffic volume) 【Installation Locations】 ○ Coated or resin floors (depending on the environment) ○ Aisles for indoor forklifts ○ Inside air showers for indoor vehicles, etc. × Areas with a lot of water or oil × Outdoor areas or direct entrances from outdoors that are significantly affected by heat or UV rays × Areas with excessive dirt × Areas where large, hard, sharp debris like stones or metal fragments are common × Floors with uneven concrete or asphalt surfaces, etc.

How do you deal with the tire dirt on the serving cart? Remove over 90% of tire dirt just by passing through! A washable and reusable adhesive mat!

Until now, the dirt on the tires of serving carts used for transporting meals has been difficult to address, leaving them almost defenseless. The lift mat removes tire dirt and keeps the floors in hospitals and welfare facilities clean. 【Expected Effects】 - Simply passing over the mat with a lift will remove dirt and dust attached to the wheels. - It captures dust that is floating in the air, preventing it from being stirred up when people or vehicles pass by. - It keeps workrooms, which dislike dust and foreign objects, clean. 【Cleaning Method】 Thoroughly wet the surface of the mat with a dedicated detergent or water, and wipe away dirt with a damp cloth or mop. 【Required Size and Usage Duration】 - Length sufficient for the wheels to make three rotations - 1 to 2 years (depending on the usage environment and traffic volume) 【Installation Locations】 ○ Coated or resin floors (depending on the environment) ○ Indoor forklift aisles ○ Inside indoor vehicle air showers, etc. × Areas with a lot of water or oil × Outdoor areas with significant heat or UV exposure, or direct entrances from outdoors × Areas with excessive dirt × Areas with a lot of large, hard, sharp debris like stones or metal fragments × Uneven concrete or asphalt surfaces, etc.

Hygiene management measures in the factory! High-strength gel material adhesive mats that help prevent tire dirt and foreign matter contamination for AGVs and serving carts [Free samples available].

The tire dirt from indoor transport vehicles used for product shipping and raw material delivery was difficult to address and was almost unprotected. The lift mat removes tire dirt and keeps the factory floor clean. 【Expected Effects】 - Simply passing over the mat with a lift or similar vehicle removes dirt and dust attached to the wheels. - It adsorbs dust suspended in the air, preventing it from being stirred up when people or vehicles pass by. - It keeps the workroom, which dislikes dust and foreign objects, clean. 【Cleaning Method】 Wet the surface of the mat thoroughly with a dedicated detergent or water, and wipe away dirt with a damp cloth or mop. 【Required Size and Usage Duration】 - Length sufficient for the wheels to make three rotations - 1 to 2 years (depending on usage environment and traffic volume) 【Installation Locations】 ○ Coated or resin floors (depending on the environment) ○ Aisles for indoor forklifts ○ Inside air showers for indoor vehicles, etc. × Areas with a lot of water or oil × Outdoor areas or direct entrances from outdoors that are significantly affected by heat or UV rays × Areas with excessive dirt × Areas where large, hard, sharp debris like stones or metal fragments are common × Floors with uneven concrete or asphalt, etc.

A sticky mat that can be washed with water and removes over 90% of tire dirt! Strongly absorbs hair, dust, and more!

Until now, the tire dirt from indoor transport vehicles used for product shipping and raw material delivery has been difficult to address, leaving them almost unprotected. The LIFT-MAT, made of thick and highly durable gel that reduces the risk of getting caught and tearing, keeping the factory floors clean. ■ Suitable Installation Locations Since it is installed using the gel's adhesion, double-sided tape is not required. It is suitable for painted or resin floors. - Aisles for indoor forklifts - Inside air showers for indoor vehicles, anterooms, etc. ■ Expected Effects - Simply passing over the mat with a lift removes dirt and dust attached to the wheels. - It adsorbs dust scattered in the air, preventing it from being flown up when people or vehicles pass by. - It removes contaminants that enter from the ground, keeping workspaces that dislike dust and foreign substances clean. ■ Unsuitable Installation Locations - Areas with a lot of water or oil (the mat becomes slippery and dangerous) - Outdoor areas or direct loading entrances significantly affected by heat or ultraviolet rays - Areas with excessive dirt - Areas where large, hard, sharp debris like stones or metal fragments are prevalent - Floors with uneven concrete or asphalt surfaces

A sticky roller with a removal rate of over 90% has been born! It effectively removes dust and debris stuck to gloves and clothing! It prevents the introduction of foreign substances into clean rooms.

This is a body adhesive roller with a handle, designed to be rolled over clothing. The soft, thick gel conforms well to the irregularities of gloves, effectively removing dirt and dust. It is an item that contributes to HACCP and SDGs. ■ Examples of Installation Locations - Before entering changing rooms or workspaces - Between work processes - Before and after clean rooms and air showers ■ How to Use - Roll it over clothing to remove dirt attached to hands or clothing. - The soft, thick gel conforms to the irregularities of clothing, effectively removing dirt and dust. ■ Cleaning Method >> Water Wash - When the adhesive weakens, rinse the surface under running water to remove dirt, and dry thoroughly. - Clean approximately once every 20 uses. >> Transfer Sheet - Roll it twice over the transfer sheet to transfer surface dirt. - Transfer the roller once for every five users. ■ Locations Not Suitable for Installation - Areas with a lot of water or oil (the adhesive weakens when wet) - Outdoor areas or direct entrances from outdoors where heat or UV exposure is significant - Areas with excessive dirt - For removing large, hard, sharp debris such as stones or metal pieces

Easily clean your adhesive roller! A transfer sheet that restores over 90% of the adhesive roller's performance without washing it with water!

【Expected Effects】 - Removes dirt and dust attached to the adhesive roller. - Eliminates the need for washing the adhesive roller, significantly reducing cleaning time. 【Usage Precautions】 - Please attach it only after it is completely dry. If applied to the wall with moisture remaining, mold may develop. - If the sheet is folded during removal, it will leave a mark and will not return to its original state. - If oil or similar substances come into contact, there is a risk of discoloration of the sheet's surface. - When cleaning, do not rub the surface with a dry cloth or rag as it may cause deterioration; use a damp cloth instead. 【Installation Location】 Near the adhesive roller in use. - No double-sided tape is needed as it is installed with gel adhesion. - Avoid using on materials that contain a high amount of soft PVC or plasticizers. - Install on smooth wall surfaces. Due to the strong adhesion, care must be taken with the installation location. - Depending on the material and its aging condition, using a cleaner may affect the painted surface. 【Cleaning Frequency Guidelines】 If wearing clean wear, clean once for every 90 transfers. *This is based on transferring once with D Quick for every 5 users. (The frequency of cleaning may vary depending on the level of dirt.)

Are you struggling with the running costs of adhesive rollers and the amount of waste? Reusable with over 90% removal rate! Contributes to SDGs too!

This is a body adhesive roller with a handle, designed to be rolled over clothing. The soft, thick gel conforms well to the contours of gloves, effectively removing dirt and dust. 【How to Use】 - Grip it in your palm or roll it over clothing to remove dirt attached to your hands or clothes. - The soft, thick gel conforms to the contours of clothing, effectively removing dirt and dust. - When the adhesive weakens, rinse the surface to remove dirt and allow it to dry thoroughly. - Clean it approximately every 20 uses. 【Examples of Installation Locations】 ○ Before entering changing rooms or workspaces ○ Before and after clean rooms or air showers × Areas with a lot of water or oil (exposure to moisture weakens the roller's adhesive) × Outdoor areas or direct entry points from outdoors that are significantly affected by heat or UV rays × Areas with excessive dirt × For removing large, hard, sharp debris such as stones or metal fragments

Are you troubled by foreign objects stuck to your back? The soft mat conforms to your back and removes foreign objects that the roller couldn't reach!

The Haimen Mat is an adhesive mat designed to remove foreign substances such as hair from the back. By leaning against the soft adhesive mat installed on the wall, it attracts foreign substances from the entire back. The adhesive sheet can be peeled off and reapplied, and when it gets dirty, washing it with water restores its adhesive power. 【How to Use】 - Press your back against the mat and twist your body about three times to remove dirt. - When the surface of the adhesive sheet becomes dirty and loses its stickiness, remove it from the mat and wash it with water or wipe it with a damp cloth. It will regain its adhesive power once dry. 【Examples of Installation Locations】 ○ On the wall in the anteroom or in front of the air shower × Areas with a lot of water or oil (the adhesive sheet loses its stickiness when wet) × Uneven surfaces × Outdoor areas or locations close to the outdoors where heat or UV exposure is significant × Areas with excessive dirt × For removing large, hard, sharp debris such as small stones or metal fragments *For more details, please download the catalog.

Is it okay for that dust to be "floating"? Thoroughly catch the dust that has been stirred up by the air shower before entering the clean room or work area!

The dust catcher is a washable and reusable adhesive sheet for walls. It catches dust blown off by the air shower on the wall, preventing dust from rising. 【Installation Location】 - Wall inside the air shower It can be installed with gel adhesive, so double-sided tape is not required. 【Expected Effects】 - Adsorption of dust blown by the air - Prevention of re-dispersion of dust that could not be completely sucked in within the air shower 【Required Size and Usage Period Guidelines】 - The expected usage period is 2 to 3 years. (This may vary depending on the usage environment, daily usage frequency, and cleaning frequency.) - For 1 square meter, it is recommended to use 6 to 8 dust catchers of size 250mm square or 500×125mm. 【Cleaning Frequency Guidelines】 Please clean the surface approximately once every 1 to 2 weeks. (The cleaning frequency may vary depending on the amount of dust accumulation. The above is a rough guideline, so please adjust the number of sheets used according to the level of dirtiness and usage frequency.)

Are you having trouble with the operation of the air shower? It captures dust inside the air shower! A washable and reusable wall-mounted dust collection sheet!

The dust catcher is a reusable adhesive sheet for walls that can be washed and used repeatedly. It catches dust blown off by the air shower on the wall, preventing dust from rising. 【Installation Location】 No double-sided tape is needed as it is installed with gel adhesive. - Wall surface inside the air shower 【Expected Effects】 - Adsorption of dust blown by the air - Prevention of re-dispersion of dust that could not be captured inside the air shower - Reduction of paper waste generated when using peel-off types 【Required Size and Usage Period Guidelines】 - The expected usage period is 2 to 3 years. (This may vary depending on the usage environment, daily usage frequency, and cleaning frequency.) - For 1 square meter, it is recommended to use 6 to 8 dust catchers of size 250mm square or 500×125mm. 【Cleaning Frequency Guidelines】 Please clean the surface approximately once every 1 to 2 weeks. (The cleaning frequency may vary depending on the amount of dust accumulation. The above is a rough guideline, so please adjust the number of sheets used according to the level of dirtiness and usage frequency.)

A sticky sheet specifically for air showers that captures dust blown away by air and prevents it from floating again! [Samples available!]

The dust catcher is a washable and reusable adhesive sheet for walls. It catches dust blown away by the air shower on the wall, preventing dust from rising. 【Installation Location】 No double-sided tape is needed as it is installed with gel adhesive. - Wall surface inside the air shower 【Expected Effects】 - Adsorption of dust blown away by the air - Prevention of re-dispersion of dust that could not be completely sucked in within the air shower 【Required Size and Usage Period】 - The expected usage period is 2 to 3 years. (This varies depending on the usage environment, daily usage frequency, and cleaning frequency.) - For 1 square meter, use approximately 6 to 8 dust catchers of size 250mm square or 500×125mm. 【Cleaning Frequency Guidelines】 Clean the surface approximately once every 1 to 2 weeks. (The cleaning frequency may vary depending on the amount of dust accumulation. The above is a rough guideline, so please adjust the number of sheets used according to the level of dirtiness and usage frequency.)