EXSEAL CO., LTD. Head office Official site

How do you deal with tire dirt indoors? A sticky mat that removes over 90% of the tire dirt from hand trucks just by passing over it, washable and reusable!

Until now, the tire dirt of indoor transport vehicles used for product shipping and raw material delivery has been difficult to address and was almost defenseless. The lift mat, made of thick and high-strength gel, reduces the risk of entanglement and tearing, keeping the factory floor clean. ■ Suitable Installation Locations Since it is installed with gel adhesion, double-sided tape is not required. Coated or resin floors are suitable. - Aisles for indoor forklifts - Inside air showers for indoor vehicles, anterooms, etc. ■ Expected Effects - Simply passing over the mat with lifts will remove dirt and dust attached to the wheels. - It adsorbs dust that is dispersed in the air, preventing it from being stirred up when people or vehicles pass by. - It removes contaminants that enter from the ground, keeping the work area clean, which is sensitive to dust and foreign substances. ■ Unsuitable Installation Locations - Areas with a lot of water or oil (the mat becomes slippery and dangerous). - Outdoor areas or direct entrances from outside that are significantly affected by heat or ultraviolet rays. - Areas with excessive dirt. - Areas with many large, hard, sharp debris such as small stones or metal fragments. - Floors with uneven concrete or asphalt surfaces.

Are you having trouble with the operation of the air shower? It captures dust inside the air shower! A washable and reusable wall-mounted dust collection sheet!

The dust catcher is a reusable adhesive sheet for walls that can be washed and used repeatedly. It catches dust blown off by the air shower on the wall, preventing dust from rising. 【Installation Location】 No double-sided tape is needed as it is installed with gel adhesive. - Wall surface inside the air shower 【Expected Effects】 - Adsorption of dust blown by the air - Prevention of re-dispersion of dust that could not be captured inside the air shower - Reduction of paper waste generated when using peel-off types 【Required Size and Usage Period Guidelines】 - The expected usage period is 2 to 3 years. (This may vary depending on the usage environment, daily usage frequency, and cleaning frequency.) - For 1 square meter, it is recommended to use 6 to 8 dust catchers of size 250mm square or 500×125mm. 【Cleaning Frequency Guidelines】 Please clean the surface approximately once every 1 to 2 weeks. (The cleaning frequency may vary depending on the amount of dust accumulation. The above is a rough guideline, so please adjust the number of sheets used according to the level of dirtiness and usage frequency.)

A sticky roller with a removal rate of over 90% has been born! It effectively removes dust and debris stuck to gloves and clothing! It prevents the introduction of foreign substances into clean rooms.

This is a body adhesive roller with a handle, designed to be rolled over clothing. The soft, thick gel conforms well to the irregularities of gloves, effectively removing dirt and dust. It is an item that contributes to HACCP and SDGs. ■ Examples of Installation Locations - Before entering changing rooms or workspaces - Between work processes - Before and after clean rooms and air showers ■ How to Use - Roll it over clothing to remove dirt attached to hands or clothing. - The soft, thick gel conforms to the irregularities of clothing, effectively removing dirt and dust. ■ Cleaning Method >> Water Wash - When the adhesive weakens, rinse the surface under running water to remove dirt, and dry thoroughly. - Clean approximately once every 20 uses. >> Transfer Sheet - Roll it twice over the transfer sheet to transfer surface dirt. - Transfer the roller once for every five users. ■ Locations Not Suitable for Installation - Areas with a lot of water or oil (the adhesive weakens when wet) - Outdoor areas or direct entrances from outdoors where heat or UV exposure is significant - Areas with excessive dirt - For removing large, hard, sharp debris such as stones or metal pieces

[Free Sample] Removes over 90% of dirt and dust from shoe soles and tires! Introducing the reusable "non-flipping" adhesive mat.

【Important Points of the Step Mat】 ■ Over 90% Removal Rate! The soft material adheres closely to the soles of shoes, removing over 90% of dirt. *Results from in-house ATP (+AMP) wipe tests. ■ Wash Away Dirt with Water! Wiping with water restores adhesion, allowing for repeated use. Contributes to reduced running costs and waste. ■ Suitable for Floor Coverage Can be laid out in changing rooms and air showers, among other places. ■ Contains Flame Retardants In addition to conventional antibacterial and anti-mold agents, flame retardants have been added. This product meets the flame retardant standard UL94 V-2. 【Suitable Installation Locations】 No double-sided tape is needed for installation due to the gel's adhesion. Suitable for coated or resin floors. - Factory corridors (can also be used for carts weighing around 100 kg) - Inside air showers, anterooms, workrooms, entrances to changing rooms, etc. 【Unsuitable Installation Locations】 - Areas with a lot of water or oil (can become slippery and dangerous) - Outdoor areas or direct entrances from outdoors that are significantly affected by heat or UV rays - Areas with excessive dirt - Areas with large, hard, sharp debris such as stones or metal fragments - Floors with uneven concrete or asphalt surfaces