Verification of CFD Simulation of Francis Turbine Using TCFD

The actual data of the Francis turbine was measured at the FORTUNAII hydroelectric power station in Minas Gerais, Brazil!

last updated Apr 14, 2025

Design and optimization of valves

The procedure explored using CAESES achieved a reduction in working time from several months to several days!

last updated Apr 14, 2025

A New Approach to the Design of sCO2 Axial Flow Turbines

Introducing a design case of a supercritical carbon dioxide axial flow turbine for waste heat recovery (WHR) in a 10MW class power plant!

last updated Apr 14, 2025

Optimization of the Leading Edge for Boundary Layer Experiments on a Flat Plate

When the minimum curvature radius is approximately 2.5mm, it is possible to prevent plastic deformation of the steel belt!

last updated Apr 14, 2025

Optimization of aerodynamic bicycle wheel design

By improving wheel design, it is possible to reduce total resistance by more than 3%!

last updated Apr 14, 2025

Sensitivity approach for turbo pump inducer geometry

Equipped with a function to raise the impeller inlet head by a sufficient amount to prevent excessive cavitation generation!

last updated Apr 14, 2025

Optimization of the poppet valve

This article explains the design system based on the collaboration between the CFD solver SimericsMP and CAESES, based on actual research conducted!

last updated Apr 14, 2025

Aerodynamic optimization of vertical axis wind turbines

CAESES can perform optimization calculations and support users in their design tasks!

last updated Apr 14, 2025

Optimization of turbine blade shape

Enabling optimization calculations of parametric models through automated processes!

last updated Apr 14, 2025

Thermal Fluid Simulation Software 'AICFD'

【Annual rental of 1.5 million yen including maintenance】Contributes to the efficiency of analysis work with high-speed processing by AI and easy GUI operation. *Presenting the "Thermal Fluid Analysis Case Collection"!

last updated Jun 11, 2025

Optimization of the shape of the volute and diffuser of a centrifugal compressor.

For shape creation, we use CAESES, and for mesh model creation and CFD analysis, we use products from NUMECA!

last updated Apr 03, 2025

Optimization design of assistive artificial hearts

Introducing the parametric model of the pump model and the evaluation of H-Q (Head-Flow) and T-Q (Torque-Flow)!

last updated Apr 03, 2025

Optimization of axial fans using TCFD and CAESES.

The goal of the optimization calculation is to maximize fan efficiency at specific flow rates and increase airflow!

last updated Apr 03, 2025

Optimization of drone propeller shape

Providing the right products to customers! Introducing the benefits and applications of CAESES at Parrot.

last updated Apr 03, 2025

Aerodynamic optimization of wind turbine blades

Focus on the slat section of the turbine blade and perform optimization calculations!

last updated Apr 03, 2025

Optimization of globe valve shape

The purpose is to improve and investigate the performance of globe valves, connecting the cloud-based CFD solver SimScale with CAESES!

last updated Apr 03, 2025

Design of a water pump with a shrouded impeller.

Introducing the creation of parametric cross-sectional shapes, as well as the camber and thickness of blades!

last updated Apr 03, 2025

CFD optimization through integration with AnsysCFD.

An appropriate CAD tool is needed to ensure the generation of various model variations to be analyzed in the automation process!

last updated Apr 03, 2025

CFD analysis and optimization of left ventricular assist device (LVAD)

There are various types of VADs, including volumetric pumps and continuous flow pumps!

last updated Apr 03, 2025

Parametric model of end wall contouring

We will also introduce modeling approaches, the construction of more complex models, and application examples!

last updated Apr 03, 2025

Parametric modeling of gear pumps

Introducing examples of analysis using modeled gear pumps and gear models based on involute curves!

last updated Apr 03, 2025

Design of a centrifugal water pump

Implementing the design process of a centrifugal water pump that maximally utilizes the capabilities of CAESES!

last updated Apr 03, 2025

Optimization of the turbine blade shape of the turbocharger.

Introduction to the combination of CFD and stress analysis, as well as scallop turbine wheels!

last updated Apr 03, 2025

Parametric modeling of turbine blade cooling structures

Introduction to CAESES parametric modeling of blades with cooling structures for optimization!

last updated Apr 03, 2025

Automatic modeling of solid data for FEM analysis.

The ultimate goal is to provide models with CAESES in one click and at high speed!

last updated Apr 03, 2025

DTEmpower Turbo Machinery Fault Diagnosis

Enhancing the monitoring and diagnosis of machinery leads to improved safety and reliability, as well as reduced operational and maintenance costs!

last updated Apr 03, 2025

[Case Study] Flow Field Analysis of Axial Flow Fan 'AICFD'

Elevate the efficiency and performance of fan design with precise flow field analysis!

last updated Apr 24, 2025

Modal analysis and static analysis of turbine rotors【AIFEM】

Created a mesh model using the mesh creation tool within AIFEM! Results demonstrating the effectiveness of the software.

last updated Apr 03, 2025

[DTEmpower] Evaluation of Wind Turbine Hub Strength

Introducing two cases of modeling and data analysis using the data modeling platform DT Empower!

last updated Apr 03, 2025

[AIFEM] Static Analysis of Hydraulic Turbine Guide Vanes

Contributing to the evolution of the energy industry and consideration for the environment! Introducing the design and analysis of guide vanes.

last updated Apr 03, 2025