FUJIKIKO Co.,Ltd. Official site

[Video available] No need for troublesome mold exchange work. A hydraulic press machine that can accommodate up to 12 molds in one unit.

Processing capacity: 15, 30, 45, 60 tons 【Customer Feedback】 〇 The conventional mold changeover process has been eliminated, leading to a significant reduction in work time. It is very effective for small-batch, diverse jobs. 〇 Since multiple employees use the equipment, there were instances of mold damage, and as a countermeasure, we performed a confirmation check every time before use. However, the stroke memory function has improved these issues, allowing us to eliminate waste in the workflow. 〇 Since the mold is left on the press, we can process urgent jobs or simple machining tasks without taking extra time. *For more details, please contact us or download the catalog.

[Video available] Simultaneously process bar rings and tapping. Eliminate defects caused by forgetting to tap!

The "Burring Tapper" is a machine that can complete both burring and tapping processes in a single operation. 【Features】 ■ Burring and tapping are linked in one operation, preventing defects from forgotten taps. ■ Mode switching allows for burring only or tapping only. ■ Synchronization control of screw pitch is achieved by using an AC servo motor. ■ No need to replace master screws or other components even if the tap size changes. ■ Easy input via a touch panel. ■ Overhang mechanism to avoid interference with bent workpieces. 【Options】 ■ M2 M2.5 M2.6 * Cutting, rolling punches, and dies can be selected at the time of purchase.

[With video] Positioning with NC allows for more accurate drilling and increased work speed. The 2-axis NC also accommodates complex processes.

The "Drill Press NC β2 Axis" is a dedicated NC positioning device for drill presses. 【Features】 - Accurate drilling made easy with NC positioning - Two-axis NC allows for drilling in arrays - Editing and saving of processing data is possible - Can be attached to your existing drill press - Effective for drilling multiple holes in angles, channels, square pipes, round pipes, etc. - Drill press can move up and down - X and Y two-axis controlled by NC - Axis lengths: 2m/3m/4m/5m (longer than 5m can also be designed) - Operation screen is touch panel type, multi-process NC control machine 【Options】 □ V-block for round pipes □ Clamp stopper for round pipes □ Drill press body □ Drill guide □ Tapping drill press □ Manual index □ Rear stopper This product has a series. - "Drill Press NC" 1-axis NC for drill press attachment - "Metal Saw NC" 1-axis NC for metal saw attachment For other functions and details, please contact us via the "Contact Us" button.

So compact that it can even fit in a car! Both feeding and retracting the wire can be done right at your fingertips.

【Applicable Plate Thickness】 ■HW200 (Laser Peak Output 1000W) Iron/ Stainless Steel: 2.8mm, Aluminum: 2mm ■HW350 (Laser Peak Output 1500W) Iron/ Stainless Steel: 3mm, Aluminum: 2.5mm ■HW450 (Laser Peak Output 2000W) Iron/ Stainless Steel: 5mm, Aluminum: 4mm ■HW550 (Laser Peak Output 2500W) Iron/ Stainless Steel: 6mm, Aluminum: 5mm *The fiber laser welding machine is classified as laser class 4. Please consult us for safety measures.

Are you checking for air leaks? There is a risk of air leaks occurring in various areas due to loose parts and aging deterioration!

【In such situations and concerns】 ■ Aware of air leaks but leaving them unattended ■ Unable to pinpoint the specific locations of air leaks ■ Detecting air leaks using hearing or soapy water ■ Considering conducting an air leak diagnosis ■ Compressors are operating even when the factory is stopped ■ Want to confirm cost reduction measures and cost-effectiveness *For more details, please refer to the related links or feel free to contact us.