KCP connector (connected to KCP Flex EPM-F Flex)
Mounting screws and a variety of connectors for KCP Flex.
To prevent detachment, both the insert and holder are designed with a screw-in type, which has proven effective. It can be used with any type of the KCP Flex series. There are many types of mounting screws available, including thick and thin steel screws for conduit, as well as NPT, DIN screws, and other special screws upon request. Assembly, connection, and wiring are smooth, and there is a wide variety of accessories available.
basic information
■ Structure Waterproof and dustproof structure Protection rating: IP67G (when connected to vinyl-coated flex) ■ Material C3604, CAC202 Standard products are unplated. Various plating treatments available upon special order. ■ Installation Instructions 1. Cut the KCP flex with a dedicated knife. 2. Pass the flex through, paying attention to the direction of the bag nut. 3. Screw the holder onto the outer diameter of the flex. 4. Screw the insert into the flex until it is completely tightened on both the inner and outer diameters. 5. Adjust the position of the holder to mesh the main body and the bag nut, then screw them together. 6. Secure the main body in a vice and, with the flex facing up, fully tighten the bag nut. * For CPB flex, wrap vinyl tape around the cut area of the flex 2 to 3 times, cut vertically, then remove the vinyl tape, remove the burrs from the inner and outer diameters, and after squeezing the wire blade outer part inward, proceed to step 2 of the installation instructions.
Price range
Delivery Time
Model number/Brand name
KCP connector
Applications/Examples of results
Machine tools, food machinery, automated machinery, FA, robots, food, packaging, semiconductor equipment, etc.
