"The world's first silicone rubber 3D printer." The innovatiQ LiQ320 has achieved 3D printing with silicone rubber like never before. By cross-linking liquid silicone rubber (LSR) with a special halogen lamp, it achieves performance levels comparable to traditional molding methods such as LIM molding, injection molding, and compression molding. Please feel free to contact us. ■ innovatiQ LiQ320 LAM (Liquid Additive Manufacturing) silicone 3D printer ▼ World's first 100% silicone LAM method 3D printer ▼ It is capable of producing shapes that cannot be molded with LIM molding and products with performance almost equivalent to LIM molding. By using various nozzles, it can process fine structures and large objects in a short printing time. With a fully automated base leveling mechanism incorporated, the handling and quality of the printed products are improved through three-point measurement using precision lasers. ◆ Announcement ◆ In November 2022, we announced our self-developed 100% silicone 3D printer "SILICOM" at a trade show. * The software is also self-developed. It is specially designed for the molding of liquid silicone rubber.

We will be releasing a recording of the Hotty Polymer webinar (approximately 32 minutes). In this session titled "Introduction to Hotty Polymer's Selected Light-Curing 3D Printers," we will cover topics such as "A simple explanation of 3D printer methods (MEX method, light-curing method)" and "The flow of 3D printer modeling," as well as provide an overview of "Our 3D printer business." This is a video that we would like those who "still don't understand 3D printers" or "are new to 3D printers" to watch. ■ Please follow us on social media. ▼ YouTube https://www.youtube.com/@hottypolymerchannel8651 ▼ Twitter https://twitter.com/hotty_polymer ▼ Instagram https://www.instagram.com/hotty_polymer/ ▼ LinkedIn https://www.linkedin.com/company/7105... ↓ Please check it out from the link below. ↓

We will be releasing a recording of the webinar (approximately 43 minutes). As for "cutting-edge software nTopology," which further expands the possibilities of 3D printing, we will provide explanations that make representative features understandable even for beginners. Representative features of nTopology include: "Topology optimization (shape optimization)," "Architected materials (lattice structures)," "Field-driven design," and "Digital embossing on shape surfaces." Additionally, we will provide information about our company, including "our 3D printer business" and "information about our 3D printer showroom." This is a video that we would like those who are struggling with "taking too long on shape design" or "experiencing slow performance with current design software" to watch. If you are interested in 3D printers or design software, please be sure to watch.

Our company will be exhibiting at the "31st Japan International Machine Tool Fair (JIMTOF2022)" held at Tokyo Big Sight from November 8 (Tuesday) to November 13 (Sunday), 2022. At the exhibition, we will showcase our newly developed 3D printer for the first time. We will unveil a groundbreaking new 3D printer. Additionally, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," and display samples. We will also exhibit the actual machine and samples of the high-resolution LCD (liquid crystal) type light-curing 3D printer "SmaPri sonic series" (planned). Our booth will be located in the Additive Manufacturing area, South Hall 2, booth number "AM204." As a measure against COVID-19, all our staff will wear masks and conduct frequent disinfection. We look forward to your visit.

Our company will exhibit at the 11th Plastic Japan (High-Performance Plastic Exhibition) held at Makuhari Messe from December 7 (Wednesday) to 9 (Friday), 2022, as part of the High-Performance Materials Week Tokyo. At the exhibition, in the 3D printer business, we will showcase our newly developed 3D printer. Additionally, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," along with sample displays. We will also showcase the unprecedented flexibility achieved by the MEX method 3D printer with our special soft filament "HP Filament (Super Flexible Type)" through live demonstrations, as well as the actual machines and samples of the "SmaPri sonic series," which boasts high resolution LCD-based photopolymerization 3D printers from various manufacturers we represent, along with samples of our original filament series, "HP Filament Series." In terms of core technology, we will display rubber and plastic products with various unique characteristics developed in-house. As a COVID-19 infection prevention measure, all staff will wear masks and conduct frequent disinfection. We look forward to your visit.

Our company will be exhibiting at the "4th Kansai Next-Generation 3D Printer Exhibition" within the Kansai Monozukuri World 2022, held at Intex Osaka from October 5 (Wednesday) to 7 (Friday), 2022. At the exhibition, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," and showcase samples produced by it. We will also demonstrate the unique flexible filament "HP Filament (Super Flexible Type)" that achieves unprecedented flexibility with MEX method 3D printers, as well as display actual machines and samples from various companies that utilize MEX method and high-resolution LCD method photopolymerization 3D printers, including the "SmaPri sonic series." Additionally, we will present our original filament samples from the "HP Filament series." We will also provide information on the next-generation engineering software "nTopology," which is effective for DfAM. Our booth is located in Hall 2, booth number "6-56." As a COVID-19 infection control measure, all staff will wear masks and conduct frequent disinfection. We look forward to your visit.

Our company will be exhibiting at the "formnext forum TOKYO 2022," which will be held at the Tokyo Metropolitan Industrial Trade Center, Hamamatsucho Hall, from September 27 (Tuesday) to 28 (Wednesday), 2022. At the exhibition, we will showcase samples produced by the world's first silicone 3D printer, the "innovatiQ LiQ320," which we have introduced. We will also demonstrate the unique soft filament "HP Filament (Super Flexible Type)" that achieves unprecedented flexibility with MEX method 3D printers, and display actual machines and samples of the "SmaPri sonic series," which boasts high resolution with LCD method photopolymerization 3D printers, as well as samples from our original filament series, "HP Filament Series." Additionally, we will provide information about the next-generation engineering software "nTopology," which is effective for DfAM. Our booth will be located on the 4th floor, booth number "4-B002." As a COVID-19 infection control measure, all staff will wear masks and conduct frequent disinfection. We look forward to your visit.

Our company will be exhibiting at the "5th Next Generation 3D Printer Exhibition (AM JAPAN)" within the Japan Manufacturing World 2022, held at Tokyo Big Sight, East Hall, from June 22 (Wednesday) to June 24 (Friday), 2022. At the exhibition, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," along with displays of printed samples. We will also showcase the printing of a special soft filament, "HP Filament (Super Flexible Type)," using our original MEX method 3D printer, the "SD's I." Additionally, we will demonstrate various MEX and LCD method photopolymerization 3D printers that we handle, as well as display samples from our original filament series, "HP Filament Series." Furthermore, we will provide information on the next-generation engineering software "nTopology," which is effective for DfAM. Our booth is located in East Hall, booth number 6-40. As a COVID-19 infection prevention measure, all staff will wear masks and conduct frequent disinfection. We look forward to your visit.

We will be exhibiting at the 10th Kansai Plastic Japan (High-Performance Plastic Exhibition) during the 10th Kansai High-Performance Material Week, which will be held from May 11 (Wednesday) to May 13 (Friday), 2022, at Intex Osaka, Hall 4. At the exhibition, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," and showcase samples produced with it. We will also demonstrate the special soft filament "HP Filament (Super Flexible Type)" that achieves unprecedented flexibility with MEX method 3D printers, as well as the MEX method and 4K resolution LCD method light-curing 3D printer "SmaPri sonic 4K LL," which we handle, along with samples from our original filament series, "HP Filament Series." Additionally, we will introduce the next-generation engineering software "nTopology," which is effective for DfAM. In our core business, we will showcase various extruded products with different properties, including the special resin sponge "HP Sponge," which is uniquely formulated by our company. Our booth is located in Hall 4, Booth Number "8-4." We look forward to your visit.

Our company will be exhibiting at the 4th Nagoya Next-Generation 3D Printer Exhibition (AM JAPAN) within the 7th Nagoya Manufacturing World, held at Port Messe Nagoya from April 13 (Wednesday) to 15 (Friday), 2022. At the exhibition, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," along with displays of samples produced by it. We will also showcase demonstrations of our original MEX method 3D printer, the "SD's I," using a special soft filament called "HP Filament (Super Flexible Type)," as well as demonstrations of various MEX and LCD method photopolymerization 3D printers that we handle, along with samples from our original filament series, "HP Filament Series." Additionally, we will provide information about the next-generation engineering software "nTopology," which is effective for DfAM. Our booth will be located in Hall West 2, Booth Number 8-53. As a COVID-19 infection prevention measure, all our staff will wear masks and frequently disinfect. We look forward to your visit.

Our company will be exhibiting at the 4th Next Generation 3D Printer Exhibition, which will be held at Tokyo Big Sight, West Hall 1 and 2, from March 16 to 18, 2022. At the exhibition, we will demonstrate the world's first 100% silicone rubber 3D printer, the "LiQ320," as well as showcase our original filament using MEX method 3D printers. Additionally, we will display various types of filaments with different properties and samples created using the groundbreaking engineering software "nTopology." Our booth number is "13-40." We will implement COVID-19 measures, including regular hand sanitization and mask-wearing at the exhibition. We look forward to welcoming you to our booth.