Hotty Polymer Co., Ltd. will be exhibiting at the "28th Monozukuri World Osaka" held at Intex Osaka, within the "7th Next Generation 3D Printer Exhibition Osaka." At the exhibition, we will showcase our self-developed 100% silicone rubber 3D printer "SILICOM" and the "PRICOM," which enables the creation of ultra-fine holes, among other 3D printers. We also plan to display and demonstrate the high-performance foot scanner "Futto Concierge," which was first exhibited at our Tokyo event. During the event, we will hold a booth seminar lasting about 20 minutes on our uniquely developed 3D printer "SILICOM." Details of the exhibition and schedule are available on our website's news release, so please check it out. Our website: https://www.hotty.co.jp/news_post/20250902_01/ Additionally, we will also conduct a seminar at the "AM/3D Printer Implementation Case Pitch" organized by the exhibition office, so please take a look at that as well. We look forward to your visit.

Our company will be exhibiting at the "Medical Consortium Preparatory Committee Medical Materials Subcommittee 1st Product and Material Exhibition" to be held on September 12, 2025 (Friday) at the Nagase Global Human Resource Development Center. This exhibition is scheduled to feature 20 exhibiting companies. We plan to showcase a desktop version of our LAM method 100% silicone rubber 3D printer "SILICOM" and display 3D printed samples made from silicone gel materials and others. We look forward to your visit.

At the exhibition, our company will present our self-developed silicone rubber 3D printer "SILICOM," along with our 3D printer services and the newly developed product "Eco Nannen Elastomer Sponge" as part of our extrusion products business. Please check our website's news release for details on the exhibition content. Our website: https://www.hotty.co.jp/news_post/20250508_01/ Additionally, we will hold a booth seminar lasting about 20 minutes on our uniquely developed 3D printer "SILICOM." The schedule is posted on our website, so please take a look. We look forward to your visit.

At the exhibition, our company will provide information about our self-developed silicone rubber 3D printer "SILICOM" and other 3D printing services. Please check the exhibition details at the URL below or on our company's website news release. Exhibition page: https://unifiedsearch.jcdbizmatch.jp/nanotech2025/jp/invitation/YjR_OhtfJyw Our company website: https://www.hotty.co.jp/news_post/20250116_01/ Additionally, we will hold a booth seminar of about 20 minutes regarding our uniquely developed 3D printer "SILICOM." The schedule is posted on our company website, so please check it out. Furthermore, our group company, Nakano Seisakusho Co., Ltd., a manufacturer of rubber rollers and rubber compression molded products, will also exhibit at the Katsushika Ward booth within the "Town Factory Exhibition Fair" at "ENEX 2025," which will be held in Hall 2. We would appreciate your visit to this as well. We look forward to your attendance.

Our company exhibited at "Medical Creation Fukushima 2024" from September 27 (Friday) to 28 (Saturday), 2024. We would like to thank those who visited us. At the exhibition, we showcased products including 3D printers and our extrusion business, as listed in the attached PDF. If you are interested in the products displayed at our booth, please feel free to contact us.

We will be holding a webinar titled "Japan's First Domestic UV-Cured Pure Silicone Rubber 3D Printer SILICOM." In the webinar, we will introduce the features of SILICOM as outlined below. ◆ Among soft material 3D printers, it has the following characteristics: ◇ "Hardness and color can be selected, and custom colors are also available." ◇ "The tensile strength of the printed objects is equivalent to that of molded products, making it suitable for mass production parts." ◇ "Utilizing Japanese-made [self-developed machine body] and [AI-equipped dedicated slicer software (patented)], it has been upgraded to enable clean and fast printing." ◇ "Complex shapes can be accommodated using a method called [cross-linking] without the need for support materials." ◆ We will also introduce examples of applications in fields such as "robotic hands and medical applications" and "imagery of applications in the automotive sector." ◇ There are two models: [Standard Type] and [Desktop Type]. We will explain the common features and differences between these two models. ◇ We will also explain the setup for "UV-cured silicone rubber materials." We sincerely look forward to your participation.

Our company will be exhibiting at the 15th Functional Materials Week, specifically at the 4th Sustainable Materials Exhibition. At the exhibition, we will showcase our core business products from 3D printers, as well as products from Nakano Seisakusho, with whom we formed a business capital alliance on July 29. Please refer to the attached PDF file for details on the exhibits. Additionally, we will also be exhibiting products at the "Bokuto Rubber Industry Association" booth at the concurrently held 14th Functional Plastics Exhibition (Booth Number: 35-25). Seven companies belonging to the Bokuto Rubber Industry Association will be showcasing their products, and we would be grateful if you could visit them as well. We look forward to seeing you at the exhibition.

Our company will be exhibiting at the 27th Monozukuri World 2024 Osaka, held at Intex Osaka, Hall 2, from Wednesday, October 2 to Friday, October 4. We will be expanding our exhibition space to twice the usual size (2 booths) to showcase our 3D printer business. Please refer to the attached file for the products we will be exhibiting. Additionally, we will hold a booth seminar at our booth for our 100% pure silicone rubber 3D printer, "SILICOM." The booth seminar will be conducted according to the following schedule: Exhibition period (October 2-4) Seminar title: Continuing Evolution!! Introduction of Japan's first 100% pure silicone rubber 3D printer "SILICOM" Scheduled times: 10:30, 13:00, 14:30, 16:00 (4 sessions in total) *Please note that the scheduled times may change without prior notice. The exhibition will be open from 10:00 to 17:00. We look forward to your visit.

Our company will be exhibiting at the "Formnext Forum Tokyo 2024." At the exhibition, we will showcase the following products: 1. A sample display of our independently developed 100% silicone LAM method 3D printer "SiliCom." 2. A display of the actual machine and sample products from the MEX method 3D printer "BambuLab X1 Series," which achieves ultra-high speed at a low price. 3. Samples created with the Italian-made delta-type pellet 3D printer "WASP 4070HDP." 4. A display of the actual machine and samples from the LCD method 3D printer "SmaPri Sonic 4K LL." 5. Collaboration with Swany Co., Ltd. to introduce the next-generation compact factory "Design Factory" and "Digital Mold," which uses resin molds produced by 3D printers for injection molding. 6. A display of filaments and sample products from the "HP Filament" series for the MEX method 3D printer, now including a new PP type. 7. Proposals for 3D digital solutions, including "3D scanning services" and "3D bone model data creation and modeling services." We sincerely look forward to your visit.

At this exhibition, we will be showcasing the following services: ○ 3D Business - Display of the actual machine and samples of our uniquely developed 100% silicone LAM method 3D printer "SILICOM." - Display of the actual machine and sample products of the MEX method 3D printer "BambuLab X1 Series," which achieves ultra-high speed at a low cost. - Introduction of the next-generation compact factory "Design Factory," utilizing digital technology, implemented at our Saitama Kuki factory in partnership with Swany Co., Ltd., along with information on "Digital Mold" injection molding using resin molds created by 3D printers. - Display of filaments and sample products from the "HP Filament" series for MEX method 3D printers, which now includes a new PP type. - Proposal of 3D digital solutions, including 3D scanning services and the creation of 3D model data. - Display of samples created with the Italian-made delta-type pellet 3D printer "WASP 4070HDP." Additionally, we will hold booth seminars at our booth. (These will be conducted once every 1 to 2 hours. Please check the details at the venue.) We sincerely look forward to your visit.

Our company will be exhibiting the following services at this exhibition: ○ Core Business (Rubber and Resin Extrusion Molding) - Sample display of a new product, the "Eco Nannen Tube," a low-hardness flame-retardant elastomer tube equivalent to UL-94 V-0, which is non-halogen and environmentally friendly. - Sample display of a new product, the "Silicone Rubber Tube for High Voltage Cable Coating," made from silicone suitable for high voltage cables. - Sample display of a high-functionality lightweight trim, the "Eco Sponge Trim," which uses aluminum for the core and elastomer sponge as the sealing material. - Sample display of "HP Flock," which employs an environmentally friendly flocking technology that does not use electrostatic flocking. - Display of various cover materials optimal for flexible LEDs. Additionally, at our booth, we will hold a seminar for the "SILICOM," the first 100% silicone rubber 3D printer in Japan, which has been further improved. (This will be conducted once every 1 to 2 hours. Please check the venue for details.) We are very much looking forward to this opportunity for you to see our products and services.

Our company will be exhibiting at the "2024 Yokohama International Automotive Technology Exhibition." We will showcase the following products at the exhibition: 1. New product: Environmentally friendly non-halogen low-hardness flame-retardant elastomer tube "Eco Nannen Tube," equivalent to UL-94 V-0, sample display. 2. New product: Sample display of "Silicone Rubber Tube for High Voltage Cable Coating," made of silicone suitable for high voltage cables. 3. Sample display of "Eco Sponge Trim," a high-functionality lightweight trim that uses aluminum for the core and elastomer sponge as sealing material. 4. Sample display of "HP Flock," which uses environmentally friendly flocking that is not electrostatic. 5. Display of various cover materials optimal for flexible LEDs. We sincerely look forward to your visit.

Our company will be exhibiting at the "2024 Yokohama International Automobile Technology Exhibition." We will showcase the following products at the exhibition: 1. A demonstration of our independently developed 100% silicone LAM method 3D printer, "SILICOM," along with actual machines and samples. 2. A display of the MEX method 3D printer "BambuLab X1 Series," which achieves ultra-high speed and low cost, along with sample prints. 3. Information on the next-generation compact factory "Design Factory," utilizing digital technology. 4. A display of filaments for the MEX method 3D printer, including the newly added PP type, and samples from the "HP Filament" series. 5. Proposals for 3D digital solutions, including 3D scanning services and bone model data creation. 6. A display of samples printed with the newly introduced delta-type pellet 3D printer "WASP 4070HDP." Additionally, we will hold a booth seminar on "SILICOM" at our booth. For more details, please refer to the information below. We sincerely look forward to your visit.

Starting this year, our company will participate in the Sustainable Materials Exhibition to introduce environmentally friendly products. We will showcase the following products at the exhibition: 1. Display of our uniquely developed silicone 100% LAM method 3D printer "SILICOM" along with printed samples. 2. Display of the Italian WASP company's delta-type pellet 3D printer and printed samples. 3. Demonstration and sample display of "Digital Mold," a simple injection molding using 3D printed resin molds. 4. Display of filament and printed samples from the "HP Filament" series, including the seawater biodegradable filament "HP Filament (marine biodegradable type)." 5. Display of the "BambuLab" series of MEX method 3D printers, which achieve low-cost and high-speed printing, along with printed samples. 6. Proposal for data creation and printing services through 3D scanning of physical objects and molds. 7. Sample display of various ultra-fine super engineering plastic tube series that have gained attention in recent years as a measure against PFAS. 8. Sample display of the revolutionary trim seal "Eco Sponge Trim," which achieves lightweight performance equivalent to rubber sponge. We sincerely look forward to your visit.

Our company will be exhibiting at the Next Generation 3D Printer Exhibition in Nagoya. We will showcase the following products at the exhibition: 1. A live demonstration and samples of our independently developed 100% Recycled 3D Printer "SILICOM." 2. A live demonstration and samples of the "SmaPri Sonic Series," an LCD-based 3D printer capable of high-resolution and high-precision modeling at a low cost. 3. Information about the next-generation compact factory "Design Factory," introduced in collaboration with Swany Co., Ltd. at our Saitama Kuki factory. 4. Display of 3D printer filament "HP Filament" and modeling samples. 5. Proposals for 3D digital solutions, including 3D scanning services. 6. A live demonstration and modeling samples of the "BambuLab X1E," which we have recently started handling. 7. Display of samples created with the Italian-made delta-type pellet 3D printer "WASP 4070HDP," which we have recently started handling. Additionally, we will hold a booth seminar for "SILICOM" at our booth according to the attached schedule. We sincerely look forward to your visit.

Our company will be exhibiting at the "High-Performance Plastics and Rubber Exhibition 2024" held at the Osaka Industrial Creation Center. At the exhibition, we will showcase: 1. Samples of our independently developed 100% silicone LAM method 3D printer "SILICOM." 2. Samples of the LCD method photopolymerization 3D printer "SmaPri Sonic series," which enables high-resolution and high-precision modeling at low cost. 3. Samples of the "Digital Mold," introduced in partnership with Swany Co., Ltd., which allows for small-lot injection molding using mass production materials at our Saitama Kuki factory. 4. Samples of high-performance rubber extrusion products. 5. Samples of high-performance resin extrusion products. We sincerely look forward to your visit.

Our company will be exhibiting at "TCT Japan 2024." At the exhibition, we will showcase: 1. The actual machine and samples of our independently developed 100% silicone LAM method 3D printer "SILICOM." 2. The actual machine and samples of the "SmaPri Sonic series," an LCD-based photopolymer 3D printer capable of high-resolution and high-precision modeling at low cost. 3. Samples of the "Digital Mold," which enables small-lot injection molding with mass production materials, introduced to our Saitama Kuki factory in partnership with Swany Co., Ltd. 4. Display of filaments and modeling samples from the "HP Filament" series for MEX method 3D printers. 5. Reference exhibits of products under development for MEX method 3D printer filaments. 6. Proposals for 3D scanner services and 3D digital solutions, including nTop. Additionally, we will hold a booth seminar for our 3D printer "SILICOM" at our booth. *Please refer to the attached materials for the schedule. We sincerely look forward to your visit.

Our company will be exhibiting at the "10th IPF JAPAN 2023 (International Plastic Fair)" held at Makuhari Messe from November 28 (Tuesday) to December 2 (Saturday), 2023. At the exhibition, we will showcase: 1. The actual machine and samples of our uniquely developed 100% silicone LAM method 3D printer "SILICOM." 2. A demonstration of the revolutionary "HP Filament (Super Flexible Type)" that achieves a rubber hardness of 60A while being a MEX method 3D printer, along with sample displays. 3. Samples of high-function products featuring the characteristics of our core business in rubber and resin extrusion products. We sincerely look forward to your visit.

Our company will exhibit at the "1st Next-Generation 3D Printer Exhibition Kyushu" within the Monozukuri World Kyushu 2023. At the exhibition, we will showcase: 1. The first unveiling in Kyushu of our independently developed 100% silicone LAM method 3D printer "SILICOM" along with actual machines and sample displays. 2. The actual machines and sample displays of the LCD method photopolymerization 3D printer "SmaPri Sonic Series," which enables high-resolution and high-precision modeling at low cost. 3. Information about the next-generation compact factory "Design Factory," which utilizes digital technology and has been introduced to our Saitama Kuki factory in partnership with Swany Co., Ltd. 4. Product samples made using "Digital Mold," which enables small-lot injection molding with mass production materials, introduced to our Saitama Kuki factory in partnership with Swany Co., Ltd. 5. Displays of filaments from the "HP Filament" series for MEX method 3D printers and modeling samples. 6. Proposals for 3D digital solutions using advanced engineering software "nTop" and "3D scanners." 7. Sample displays of high-function products with various characteristics of extruded products.

Our company will be exhibiting at the "19th Medical Creation Fukushima 2023." At the exhibition, we will showcase: - The first presentation in Tohoku of our independently developed 100% silicone LAM method 3D printer "SILICOM" with actual machines and samples on display. - The actual machines and samples of the LCD method photopolymerization 3D printer "SmaPri Sonic series," which enables high-resolution and high-precision modeling at low cost. - Samples of the "Digital Mold," which allows for small-lot injection molding using mass production materials, introduced to our Saitama Kuki factory in partnership with Swany Co., Ltd. - Information about our service that creates bone models from DICOM data using a 3D printer. - Samples of functional extrusion products primarily made of silicone rubber, which is our core business. We sincerely look forward to your visit.

Thank you very much for your continued support of our products. We would like to reintroduce the high-precision, high-resolution LCD (liquid crystal) 3D printer "Smapri," which we introduced in our first session, discussing the reasons for its popularity and effective ways to utilize it. 【Recommended for the following individuals】 - Those who want to create high-precision and high-resolution models - Those who want to efficiently create models and reduce time - Those who want to freely choose hardness in light curing (with soft materials, variations from 50° to 90° are possible) - Those who want to use it for checking fit, as well as for verifying molds before creating injection-molded or pressed products - Those who are interested in where it is actually being utilized We look forward to your participation.

Our company will be exhibiting at the "5th Kansai Next Generation 3D Printer Exhibition (AM JAPAN)." At this exhibition, we will expand our booth size to two spaces and present each service with its own theme. 1. Display of the actual machine and samples of our independently developed 100% silicone LAM method 3D printer "SILICOM." 2. Display of the actual machine and samples of the LCD method photopolymerization 3D printer "SmaPri Sonic series," which enables high-resolution and high-precision modeling at low cost. 3. Introduction of the "Design Factory" utilizing digital technology, implemented at our Saitama Kuki factory in partnership with Swany Co., Ltd. 4. Display of production samples created using "Digital Molds," which enable injection molding in small lots with mass production materials. 5. Display of filaments and modeling samples from the "HP Filament" series. 6. Proposal of 3D digital solutions, including nTop. 7. Display of examples of solutions from product development to mass production through our 3D printer contract processing services. We also plan to conduct presentations on the day of the event. Please refer to the attached file for more details. We sincerely look forward to your visit.

Our company will be exhibiting at the "formnext forum TOKYO 2023" held from September 28 (Thursday) to 29 (Friday), 2023. At the exhibition, we will showcase: 1. Display of 3D printed samples from our uniquely developed silicone 100% LAM method 3D printer "SILICOM." 2. Display of the actual MEX method 3D printer "RAISE3D Pro3," which is the top-selling industrial 3D printer, along with printed samples. 3. Display of the actual MEX method 3D printer "FUNMAT HT Enhanced," capable of printing super engineering plastics at a low cost, along with printed samples. 4. Display of the actual "SmaPri Sonic" series of LCD method 3D printers, which enable high precision and high-speed printing, along with printed samples. 5. Display of printed samples from the "HP Filament" series, which offers filaments for MEX method 3D printers ranging from soft materials to super engineering plastics. 6. Display of samples from the groundbreaking new model "Digital Mold" for small lot production. We look forward to your visit.

Our company will be exhibiting the following services at this exhibition. ○ 3D Printer Business - Display of the actual machine and samples of our uniquely developed 100% silicone LAM method 3D printer "SILICOM." - Display of the actual machine and samples of the LCD method photopolymerization 3D printer "SmaPri Sonic Series," which enables high-resolution and high-precision modeling at a low cost. - Introduction of the next-generation compact factory "Design Factory," utilizing digital technology, implemented in our Saitama Kuki factory in partnership with Swany Co., Ltd. - Display of samples of "Digital Molds," which enable small-lot injection molding with mass production materials, implemented in our Saitama Kuki factory in partnership with Swany Co., Ltd. - Exhibition of filaments and modeling samples from the "HP Filament" series for MEX method 3D printers. - Introduction of solutions and display of examples from product development to mass production through our 3D printing contract processing services. Additionally, we will hold a booth seminar at our booth. *For details, please refer to the attached materials. We are very much looking forward to this opportunity to showcase our products and services.

Our company will be exhibiting the following services at this exhibition: ○ Core Business (Rubber and Resin Extrusion Molding) - Sample display of the environmentally friendly gasket "Eco Sponge Trim," which excels in lightweight, rust prevention, anti-adhesion, and maintenance. - Sample display of various silicone rubber extrusion products. - Sample display of "HP Flock," a revolutionary flocking technology that is not electrostatic flocking. - Sample display of various extrusion products for the automotive industry, such as protector molds. Additionally, we will hold a booth seminar at our booth. *For details, please refer to the attached materials. We are very much looking forward to this opportunity to showcase our products and services.

Our company will be exhibiting at the 35th Japan Manufacturing World in the "6th Next Generation 3D Printer Exhibition." This time, we will expand our exhibition space and set themes for each service. - Display of the actual machine and samples of our uniquely developed 100% silicone LAM method 3D printer "SILICOM." - Display of the actual machine and samples of the LCD method photopolymerization 3D printer "SmaPri Sonic Series," which enables high-resolution and high-precision modeling at low cost. - Introduction of the next-generation compact factory "Design Factory," utilizing digital technology. - Production of novelty goods and sample display using "Digital Mold," which enables injection molding in small lots with mass production materials. - Display of filaments from the "HP Filament" series for MEX method 3D printers and modeling samples. - Solutions and examples from product development to mass production through our 3D printer contract processing service. Additionally, we will conduct presentations within our booth. Please refer to the attached PDF file for more details.

Our company will be exhibiting at the "31st Japan International Machine Tool Fair (JIMTOF2022)" held at Tokyo Big Sight from November 8 (Tuesday) to November 13 (Sunday), 2022. At the exhibition, we will showcase our newly developed 3D printer for the first time. We will unveil a groundbreaking new 3D printer. Additionally, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," and display samples. We will also exhibit the actual machine and samples of the high-resolution LCD (liquid crystal) type light-curing 3D printer "SmaPri sonic series" (planned). Our booth will be located in the Additive Manufacturing area, South Hall 2, booth number "AM204." As a measure against COVID-19, all our staff will wear masks and conduct frequent disinfection. We look forward to your visit.

Our company will exhibit at the 11th Plastic Japan (High-Performance Plastic Exhibition) held at Makuhari Messe from December 7 (Wednesday) to 9 (Friday), 2022, as part of the High-Performance Materials Week Tokyo. At the exhibition, in the 3D printer business, we will showcase our newly developed 3D printer. Additionally, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," along with sample displays. We will also showcase the unprecedented flexibility achieved by the MEX method 3D printer with our special soft filament "HP Filament (Super Flexible Type)" through live demonstrations, as well as the actual machines and samples of the "SmaPri sonic series," which boasts high resolution LCD-based photopolymerization 3D printers from various manufacturers we represent, along with samples of our original filament series, "HP Filament Series." In terms of core technology, we will display rubber and plastic products with various unique characteristics developed in-house. As a COVID-19 infection prevention measure, all staff will wear masks and conduct frequent disinfection. We look forward to your visit.

Our company will be exhibiting at the "4th Kansai Next-Generation 3D Printer Exhibition" within the Kansai Monozukuri World 2022, held at Intex Osaka from October 5 (Wednesday) to 7 (Friday), 2022. At the exhibition, we will demonstrate the world's first silicone 3D printer, the "innovatiQ LiQ320," and showcase samples produced by it. We will also demonstrate the unique flexible filament "HP Filament (Super Flexible Type)" that achieves unprecedented flexibility with MEX method 3D printers, as well as display actual machines and samples from various companies that utilize MEX method and high-resolution LCD method photopolymerization 3D printers, including the "SmaPri sonic series." Additionally, we will present our original filament samples from the "HP Filament series." We will also provide information on the next-generation engineering software "nTopology," which is effective for DfAM. Our booth is located in Hall 2, booth number "6-56." As a COVID-19 infection control measure, all staff will wear masks and conduct frequent disinfection. We look forward to your visit.

Our company will be exhibiting at the "formnext forum TOKYO 2022," which will be held at the Tokyo Metropolitan Industrial Trade Center, Hamamatsucho Hall, from September 27 (Tuesday) to 28 (Wednesday), 2022. At the exhibition, we will showcase samples produced by the world's first silicone 3D printer, the "innovatiQ LiQ320," which we have introduced. We will also demonstrate the unique soft filament "HP Filament (Super Flexible Type)" that achieves unprecedented flexibility with MEX method 3D printers, and display actual machines and samples of the "SmaPri sonic series," which boasts high resolution with LCD method photopolymerization 3D printers, as well as samples from our original filament series, "HP Filament Series." Additionally, we will provide information about the next-generation engineering software "nTopology," which is effective for DfAM. Our booth will be located on the 4th floor, booth number "4-B002." As a COVID-19 infection control measure, all staff will wear masks and conduct frequent disinfection. We look forward to your visit.