We have developed a renewed version of the Comm Assist series with the aim of enhancing product functionality. Accordingly, we will be selling the current Comm Assist series until stock runs out, after which we plan to transition to the renewed products. Introduction of successor models: Comm Assist-100XP ⇒ Comm Assist-100XP II Comm Assist-100XP board type ⇒ Comm Assist-100XP II board type Comm Assist-io ⇒ Comm Assist-io II Comm Assist-i4o4 ⇒ Comm Assist-i4o4 II Comm Assist-io-c ⇒ Comm Assist-io II-c Comm Assist-io-s ⇒ Comm Assist-io II-s Comm Assist-i4o4-c ⇒ Comm Assist-i4o4 II-c Comm Assist-i4o4-s ⇒ Comm Assist-i4o4 II-s Transition period: Around January 2026.

We have released product information for the new product IOG-100-Mod. This product is compatible with "Facility Assist-SaaS" and "Facility Assist." In conjunction with this, we have published the product catalog and product description materials. For more details, please refer to the product information and downloads for IOG-100-Mod. - IOG-100-Mod

"Comm Assist-Mod" is a protocol converter that connects RS-232C devices or RS-485 devices to Ethernet. It allows you to select the communication method from multiple communication modes according to the connected device. In Modbus/TCP mode, by connecting RS-485 devices that support Modbus RTU/ASCII transmission methods, it sends (requests) Modbus/TCP data from a PC or PLC on Ethernet to RS-485 Modbus RTU/ASCII devices as Modbus RTU/ASCII data, and conversely, it sends (responds) Modbus RTU/ASCII data from RS-485 Modbus RTU/ASCII devices to a PC or PLC on Ethernet as Modbus/TCP data. Additionally, it has RS-232C/Ethernet converter and RS-485/Ethernet converter functions.

We have updated the equipment monitoring package "Facility Assist" and the cloud-compatible equipment monitoring system "Facility Assist for SaaS." - Added supported product IP3-MP8 - Added functionality Support for Process Flow Diagrams (PFD) In conjunction with this, we have updated the information for each product. For details, please refer to the individual product pages.

i N D Corporation has announced the product information for the contact monitoring device "IP3-MP8," which is compatible with "Facility Assist for SaaS." The "IP3-MP8" is a new product that supports Facility Assist for SaaS. It has 8 contact inputs and 2 contact outputs, and it can be connected to the LTE-compatible mobile router LM-200, enabling contact monitoring and control over LTE. By connecting this device to contact equipment, it allows for remote control, remote status monitoring, and event notifications for various devices with contact inputs and outputs. 1. Compatible with Facility Assist for SaaS You can check the status of contact inputs and outputs, power status, and more from Facility Assist for SaaS. 2. Contact Inputs and Outputs It has 8 contact inputs that regularly transmit notifications of contact changes, contact status, the number of times contacts are ON, and ON duration. 3. Power Outage Monitoring The IP3-MP8 supplies power to the LM-200, so even in the event of a power outage, it can report the outage using the battery of the IP3-MP8.

We would like to inform you that we will be discontinuing the sale of the IEEE802.15.4 compliant Bee-related products "Comm Assist-100Bee," "BeeCom," "BeeP2A1," "BeeA2," and the related Windows application "E2Monitor" as listed below. We apologize for any inconvenience this may cause and appreciate your understanding. 《Discontinued Products》 　・Comm Assist-100Bee 　・BeeCom 　・BeeP2A1 　・BeeA2 　・E2Monitor 《Final Maintenance Deadline》 　 Until June 29, 2029 　 For more details, please refer to the list of discontinued products on the support page.

A package that not only provides "visualization" but also enriches the necessary information for maintenance and monitoring systems, accommodating various scales of power generation facilities. Energy data collection devices, such as ECom-PV and ECom-PVM, that acquire power generation amounts from power converters (PCS) and strings, as well as temperature and solar radiation data. End devices like OP485-in and OP485-ai that collect trading electricity information, contact alarms, and analog information within the cubicle. A gateway, IOG-100, that collects and processes information from OP485 and transmits it to a mobile router, L2X Assist. The system consists of a web application/signage application that processes and stores data on the cloud for "visualization," along with a monitoring system, PV-Watcher, that performs maintenance monitoring of power generation facilities. 【Overview and Features】 ■ By utilizing standardized package software, it is possible to create a low-cost remote monitoring system. ■ By selecting monitoring functions that are block-based according to functionality, it can accommodate solar power plants from medium and small scales to large scales. ■ By utilizing battery monitoring functions and trading electricity information acquisition functions, it is possible to support demand response and VPP construction.

Our company has been involved in various communication means in the industrial sector, including communication drivers, protocol converters, mobile routers, and IoT gateways. We would like to announce the publication of a case study on the "Remote Monitoring and Control System for Water Supply and Sewerage Facilities," which utilizes these technologies. The operation and maintenance (O&M) of water supply and sewerage facilities is carried out through remote monitoring and control using a cloud-based center. The operational status of equipment monitored at each site is collected using dedicated data collection devices that gather data from sensors, measuring instruments, and contact monitoring devices. This data is then converted on the cloud side into user-friendly communication protocols and data formats, making it easier to create application software tailored to each user's needs. ■ System Configuration - Remote monitoring of water treatment plant SCADA systems - Remote monitoring of equipment for water supply and sewerage facilities - Remote monitoring and control of sewer pump systems - Cloud-side system

"iND MIST2" is a serial transfer service that enables remote control of RS-232C devices by sending emails to a specified email address. It converts data from terminal devices such as RS-232C equipment into TCP/IP using our LTE-compatible communication terminal, sends it to our data center, and then sends emails via a dedicated email address from the data center. By connecting our "iND MIST2 compatible products" to RS-232C devices, customers can receive data from RS-232C devices as emails on mobile devices such as mobile phones and smartphones, or on email software on company computers. ■ Main Applications Regular data reception from measuring devices Manhole pumps (such as water level information) Cubicles (substation equipment) Full/empty information for oil tanks, propane gas, etc. Unmanned coin-operated car washes, wind power generation, electronic display boards, temperature sensors, and other monitoring ■ Main Features Excellent cost performance High reliability No provider contract required Up to 10 registered email addresses for sending and receiving Life check function Web-based configuration changes Email reception data forwarding function (optional)

The "F2L Assist-SS-A" is an LTE-compatible adapter equipped with an RS-232C protocol converter that incorporates NTT Docomo's LTE communication module UM05-SS. Since it can be used with a flat-rate plan, you can utilize it for a fixed monthly fee. It features RS-232C protocol conversion, allowing for a wide range of applications such as switching from FOMA/PHS to LTE. Main Features: ■ IoT Plan Compatible It can utilize the IoT plans offered by NTT Docomo. ■ High-Speed Communication It supports LTE communication with a maximum of 10 Mbps for receiving and 5 Mbps for transmitting. Built-in Module: UM05-SS (NTT Docomo) (The maximum speed may vary depending on the radio environment in the installation area.) ■ RS-232C Protocol Conversion Function Data received from the RS-232C port is encapsulated into TCP/IP and UDP/IP and sent to the designated center. Additionally, TCP/IP and UDP/IP data received from the center has its header removed and is output to the RS-232C port without any procedures.

We have released product information for the high-voltage smart power meter compatible EMS controller "LXG-600." In conjunction with this, we have also published product introduction materials. The "LXG-600" is an EMS controller for high-voltage smart meters. It has the capability to acquire power consumption data using the IPv6-based "B-route" information communication method equipped in high-voltage smart meters. It converts the acquired data in ECHONET Lite format into the reception protocol/data format for cloud servers and has the functionality to regularly transmit this data via LTE wireless communication carrier networks. The transmission method to the cloud server can also be customized according to the customer's needs.

We have released the new products: LoRa-compatible IoT gateway LMG-100, OP920 series FOMA to LTE migration adapter L2X Assist-RS-E LTE-compatible RS-232C Procon function-equipped IoT adapter L2X Assist-RS-A.

We have released the new LTE-compatible contact monitoring devices "IP3-LP4" and "IP3-LP8-2."

We have released the cloud-compatible equipment monitoring system "Facility Assist for SaaS." The service is scheduled to start in October 2018. "Facility Assist for SaaS" is a service that allows users to utilize the packaged product "Facility Assist," which monitors the condition and stable operation of equipment and machinery, at a reasonable monthly fee through SaaS delivery.

The "LM-200" is an M2M/IoT router equipped with multi-carrier LTE-compatible RS-232C protocol conversion functionality. It can be used with services from various domestic communication carriers (NTT Docomo, KDDI, SoftBank, MVNO). In addition to standard router functions, it features RS-232C protocol conversion, allowing for a wide range of applications such as switching from FOMA/PHS to LTE. Furthermore, it can be utilized for data collection from outdoor devices that require strict environmental performance, such as parking payment machines, as well as for data collection in EMS (solar power, wind power) and for export equipment.

The "IOG-100" is an IoT gateway device compatible with our IoT platform "Facility Assist." By connecting the OP485 series, it supports a variety of interfaces such as contact input/output, analog, and pulse, enabling monitoring of water levels, current, temperature, power consumption, and more, as well as alarms and equipment control. This device is equipped with intelligent features such as data processing and event detection, allowing for flexible customization according to customer needs. For example, it can minimize data volume and save communication costs by sending event notifications to the server during state changes like alarm occurrence or recovery, or it can perform data processing on the server for more detailed monitoring. Additionally, by integrating with "Facility Assist," it becomes easier to implement an IoT system that supports equipment management and visualization of conditions.

We have released product information for the new product "HLT-RS3A." This product is the LTE-compatible version of the conventional FOMA-compatible product "HFT-RS3A." In conjunction with this, we have published the user manual and FAQ. For more details, please refer to the product information and downloads for each product.