PLL102S PLL Clock Multiplier
The low-frequency clock is multiplied by 9 to 135 times to achieve a frequency range of 1M to 10MHz, and with PLL technology, the input and output clocks are synchronized with low jitter! [Custom specifications supported]
This device is a frequency multiplier that multiplies the input clock. Within the output frequency range of 1MHz to 10MHz, it can be set to multiply from 9 times to 135 times. It is useful when a clock that has been frequency-multiplied in sync with the input clock is needed. Our company offers custom contract development for low-noise circuits, analog circuits, filter circuits, signal processing circuits, and circuit design. Please feel free to contact us. *You can view the instruction manual by downloading the PDF below.
basic information
■ Input Voltage: 5V CMOS/TTL Level ■ Input Frequency: 100kHz ■ Output Voltage: 5V CMOS Level ■ Output Resistance: 51Ω ■ Output Frequency: 1.0MHz to 10MHz ■ Multiplication Factor: 9 to 135 times ■ Power Input: +12V DC ■ Output Jitter: Less than 6nsec ■ Output Spurious: Less than -40dB ■ Connector: Clock Input/Output BNC Receptacle (GND side non-isolated) Power Input HR10A-7R-4P Connector (Hirose Electric) Pin 1: +12V, Pin 3: 0V, Pins 2, 4: Not used ■ Setting Switch: 8-bit DIP Switch ■ Power Consumption: Approximately 1.5VA ■ Dimensions: 110(W) × 30(H) × 80(D) mm We will customize to meet the customer's intended use. *For more details, please refer to the PDF document or feel free to contact us.*
Price range
P3
Delivery Time
OTHER
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
