Wear/Erosion Resistance: Belzona 1321 Ceramic S Metal

A lining material that excels in electrical insulation, adheres strongly to the surfaces of various hard base materials, and protects equipment from erosion and corrosion caused by fluids.

[Overview] This is a lining material specialized for wear resistance, primarily composed of epoxy resin. Due to its excellent wear resistance, it is effective in protecting against fluids from pumps and piping. It can bond not only to metals but also to resins, making it suitable for corrosion-resistant lining repairs such as polyethylene. Since it only requires mixing the main agent and the hardener, it can be easily used by anyone. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝ [Demo/Sample Distribution] If you would like a demo or sample, please fill out the application and conditions in the "Contact Us" section below and send it to us. *Please note that we may decline requests depending on various conditions. ＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

basic information

[Instructions] □ Surface Preparation: Remove rust from corroded metal areas using blasting, grinding, etc., and roughen the surface. □ Degreasing Cleaning: Remove moisture, oil, and dirt using a cleaning agent. □ Mixing: Measure out the main agent and hardener in a plastic container according to the mixing ratio and mix thoroughly to avoid color unevenness. □ Application: Initially apply to the prepared surface by rubbing it in, then apply to the required thickness. To suppress pinholes, it is recommended to apply two layers in different color tones. [Product Information] □ Properties: Liquid "after mixing" □ Color Tone: Blue-Grey □ Packaging: 1 kg "main agent and hardener set" □ Mixing Ratio (by weight): Main agent 11 : Hardener 1 □ Curing Time: 24 hours at 25°C [Product Physical Properties] □ Adhesive Strength (Iron): 18.7 MPa □ Heat Resistance: 60°C (wet) □ Shelf Life (unopened): 5 years