Japan Machinery Co., Ltd. will be exhibiting at "BATTERY JAPAN [Autumn] 2023 - The 15th [International] Secondary Battery Exhibition [Autumn]" held at Makuhari Messe. We handle a wide range of equipment and devices for the material processes of lithium-ion (LIB) batteries and research and development of all-solid-state batteries. Additionally, we will provide devices that can be used in explosion-proof processes, assisting in the promotion of IoT and DX across the entire secondary battery process. We sincerely look forward to your visit.

Japan Machinery Co., Ltd. will be exhibiting at "INCHEM TOKYO 2023," held at the East Exhibition Hall of Tokyo Big Sight. During the event, we will showcase our expertise in process transport equipment such as fluid pumps and powder vacuum conveyors, as well as measurement instruments like level measurement devices and Coriolis mass flow meters. We will also display explosion-proof smartphones and new products for wearable chairs. Additionally, we will hold an exhibitor seminar on September 21 at 1:30 PM in the main venue. The topic will be "Introduction to Explosion-Proof Smartphones and Wearable Devices, and Product Portfolio for Powders and Liquids." We sincerely look forward to your visit.

Japan Machinery Co., Ltd. will be exhibiting at the 25th INTERPHEX Japan held at Tokyo Big Sight. We will provide various pumps suitable for identifying raw material procurement, quantifying process fluids, and for low pulsation and transportation. Regarding the measurement of pressure, temperature, conductivity, and flow rate of the transported liquid, we will showcase single-use compatible products, and for flow meters, we plan to exhibit a Coriolis mass flow meter as a single-use model. We sincerely look forward to your visit.

Thank you for your continued support. We are holding a monitor campaign for the "Wearable Chair" Noonee, which received a lot of positive feedback at the exhibition. This is a special campaign available until March 31. Please refer to the attached PDF for details. You can purchase from just one unit, so we encourage you to consider it for trial implementation. We look forward to hearing from you all.

Japan Machinery Co., Ltd. will be exhibiting at the 'Plant Show OSAKA 2022' held at Intex Osaka. This comprehensive exhibition will showcase a wide range of products, technologies, and services aimed at solving challenges in factories and plants, including chemical equipment, devices, various systems, as well as environmental and energy solutions, water treatment, explosion-proof and disaster prevention measures. Our company will be exhibiting in the explosion-proof and disaster prevention risk measures area, showcasing actual devices that are useful for operations in explosion-proof environments, such as explosion-proof smartphones, tablets, and remote monitoring equipment. We sincerely look forward to your visit. 【Main Exhibits at Our Booth】 ■ Pepperl+Fuchs (Explosion-proof smartphones, tablets, remote desktop) ■ Smart glasses to be released in 2023 ■ PAMAS (Liquid particle counter)

We will be exhibiting at the "Japan Die Casting Exhibition (j-dec) 2022," which will be held at Pacifico Yokohama from November 10 (Thursday) to 12 (Saturday), 2022. During the exhibition, we will showcase products related to die casting, including luminescence analysis devices, molten metal level sensors, and 3D scanners. We sincerely look forward to your visit. 【Exhibited Products】 - Luminescence Spectral Analysis Device GS1000 OBLF - Non-ferrous Molten Metal Level Sensor ProH Precimeter - 3D Scanner QREAFORM - Handheld X-ray Fluorescence Analysis Device S1 TITAN BRUKER - Handheld Marking Machine MARKATOR

Japan Machinery Co., Ltd. will be exhibiting at the "Powder Industry Exhibition 2022" held at Tokyo Big Sight. On the day of the event, we will showcase demonstration units of essential equipment for powder manufacturing, including air-driven powder conveying systems, pinch valves, and flow sensors. We invite you to stop by. 【Exhibited Products】 - Vacuum conveying systems for powders and granules (VOLKMANN) - Pinch valves (AKO) - Powder flow sensors (DYNA) - Flexible connections (FILCOFLEX) - Explosion-proof smartphones and tablets (Pepperl+Fuchs) - Rupture discs (REMBE) - Self-priming seal-less pumps (MOUVEX) - Air-driven diaphragm pumps (WILDEN) - Compressors and vacuum pumps (JUN-AIR) For more details on the exhibited products, please visit here: https://www.jmc.asia/news/powtex2022/

Japan Machinery Co., Ltd. will exhibit at "JASIS 2022" held at Makuhari Messe. On that day, we will showcase a liquid particle counter, a handheld fluorescent X-ray analyzer, and a cleaning machine.

Japan Machinery Co., Ltd. will be exhibiting at the "2nd International Secondary Battery Expo Autumn (Battery Japan)" held at Makuhari Messe. At our booth, we will showcase a wide range of materials processes for lithium-ion (LIB) batteries and equipment for research and development of all-solid-state batteries. Additionally, we will prepare devices that can be used in explosion-proof processes to assist in promoting IoT and DX across the entire secondary battery process. We look forward to your visit.

We are pleased to announce that we will be exhibiting at the 24th Interphex Japan, which will be held at Tokyo Big Sight. We plan to showcase products of interest related to various processes in pharmaceutical manufacturing, including bio-pharmaceuticals and low molecular weight compounds, from procurement of raw materials to research, development, and production. We will have a variety of pumps suitable for quantifying process fluids, low pulsation, and transportation, starting from the identification of raw materials. We sincerely look forward to your visit.

We will be exhibiting at the 21st INTERPHEX JAPAN, which will be held from July 3 (Wednesday) to July 5 (Friday), 2019. The theme of this exhibition is to present the latest automation manufacturing, measurement, and single-use technologies that can be utilized for a wide range of applications from manufacturing to analysis, delivering unique solutions from Japan Machinery to everyone. <Main Highlights> ■ Powder Automation Technology ■ Mixing, Emulsification, Aseptic Technology, Single-Use Technology ■ Filtration Technology, Transdermal Absorption Testing Technology We sincerely look forward to your visit.

We will be exhibiting at FOOMA JAPAN (2019 International Food Industry Exhibition) held from July 9 (Tuesday) to July 12 (Friday). <Exhibited Products> ■ Liquid Nitrogen Drip Device ■ Inline CO2 Concentration Meter ■ Inline Refractometer <Highlights> ■ VBC's Liquid Nitrogen Drip Device: Enables safe and efficient use of liquid nitrogen for nitrogen replacement and pressure maintenance within containers. ■ Maselli's Inline CO2 Concentration Meter: Allows for high-precision and quick measurement of CO2 concentration inline. ■ Maselli's Inline Refractometer: Achieves real-time concentration management during the raw material production, blending, and filling processes. We sincerely look forward to your visit.

We will be exhibiting at the Plant Show held in November. We will showcase various equipment that is useful for automating production facilities, streamlining processes, and improving quality. Please be sure to stop by our booth. If you need an invitation ticket for the exhibition, please request it through the contact section of our website, and we will send it to you. All of our staff are sincerely looking forward to your visit. Exhibition: INCHEM TOKYO 2011 Date: November 16 (Wednesday) - 18 (Friday), 2011, 10:00 - 17:00 Venue: Tokyo Big Sight (Tokyo International Exhibition Center, East Halls 1-3) Booth: East Hall 3, 3G-17 ◆Exhibited Products◆ 【Pumps】 WILDEN - Air-operated diaphragm pump MOUVEX - Eccentric disc pump VIKING - Internal gear pump And many more 【Measurement】 MAGNETROL - Guided wave level sensor BROOKFIELD - Vibrating inline viscometer And many more 【Powder Conveying】 VOLKMANN - Air-operated vacuum powder conveying system 【Others】 KINEMATICA - Dispersing, emulsifying, and mixing machines And many more