ジャロック Official site

A storage rack with excellent storage efficiency that makes the most of depth and height.

This is a rack that allows a forklift to enter deep into the rack and store pallets on both ends of the cantilever arms. It is specialized for stock-type storage and improves storage efficiency after implementation. 【Note】 - It is not suitable for warehouses with a wide variety of small quantities and high fluidity. It is not suitable for "first in, first out" or "large lot inbound → small lot outbound." - Since the pallets are supported at both ends, a certain level of strength is required. Strong steel pallets are recommended. (Wooden or plastic pallets may bend significantly depending on their weight.) - Operation with pallets of the same size is required.

"First In, First Out" and "First In, Last Out" both supported, significantly improved storage efficiency!

This is a conveyor-type rack that allows for fluid operation without the use of power. It is suitable for the bulk storage of the same type of pallets, and by adding a slight incline to the rollers in the depth direction of each rack level, it enables the packing, flowing, and storage of a large number of pallets. It can accommodate both first-in-first-out and first-in-last-out operations. *Please confirm in advance, as there may be cases where operation is not possible depending on the shape of the pallets.