- Lightweight and compact. Easy robot attachment. 30% share in the international market. - Easy adjustment of clamp arm opening. <Main Advantages> - Uses shielded needle bearings in the drive shaft section. - Opening and closing angle adjustment within 20 seconds. - Handle position can be easily changed to either side at the installation site. - Easy separation of the connector from the proximity switch during repairs. - Protection for the sensor connector box. - No need for parts (Steel Risers) for opening adjustment. - Clamp arm design where force is evenly applied to all four sides of the drive shaft.

The inline sight glass provided by Steriflow complies with the extensive applications of ASME BPE and is particularly suitable for high-purity piping systems in the pharmaceutical and biopharmaceutical industries. The structure features a transparent window design that offers a wide field of view and does not require backlighting. The inner diameter of the glass tube and connection matches the pipe diameter, ensuring no fluid retention even when installed horizontally. Additionally, the sight glass window is suitable for various applications, especially for high-purity containers and piping systems in the pharmaceutical and biopharmaceutical industries. The large borosilicate window guarantees optimal visibility for processes. The SGW series combines borosilicate glass with stainless steel Tri-clamp™ rings using advanced technical methods. The two components form a continuous single unit with sufficient strength, without gaps or cracks, and there are no joining materials between the glass and the ring. !! For more details, please contact us or download the catalog !!

The Haskel gas booster features a small area gas piston directly connected to a large area air piston, with the gas piston operating within a high-pressure gas barrel. The gas barrel and end cap are equipped with check valves for intake and discharge. The air drive section includes a cycling spool and pilot valve, allowing for continuous reciprocating operation when compressed air is supplied to the air drive inlet. <Features of the gas booster> ★ No electricity is required as it is air-driven ★ No lubrication is needed in the airline ★ The air drive section and gas section are isolated, preventing hydrocarbon contamination ★ Maximum pressure can be increased up to 269 MPa ★ A wide range of models is available to accommodate various needs ★ Effective cooling utilizing exhaust from the driving air ★ Available in standard and customized versions ★ Compatible with most gases.

We provide a series of filter files for each use case, suitable for high temperatures and high pressures. Filter materials are the core components of filters. The reason why Norman Filters are sometimes referred to as "final stage filters" is that they prevent the intrusion of fine particles into critical systems. To establish this reliability, Norman selects high-quality filter materials tailored to various particle sizes. Norman Filter Company manufactures filter materials made of stainless steel in wire mesh, random fiber, or porous sintered forms. Additionally, we can accommodate customer requests for cellulose materials, fiberglass, and other special materials.

The FB6C pressure regulator controls the pressure of devices that require maintenance in a sanitary condition. The FB6C operates by sensing the pressure on the underside of the diaphragm downstream of the seat. When the downstream pressure approaches the set pressure, the force exerted by the pressure on the diaphragm begins to move the plug upward to close it, overcoming the force of the set spring. This reduces the downstream pressure and maintains the set pressure. When the pressure on the underside of the diaphragm begins to drop, the spring force pushes the plug downward to maintain the set pressure. <Features> • No sliding parts in contact with the fluid ‒ Prevents microbial growth • 100% 316L stainless steel body and trim • Self-draining • High precision (large diameter diaphragm with low droop) For performance data demonstrations of this product, please contact the distributor • A pin for dome lock can be inserted into the spring housing to accommodate CIP and SIP • EPDM diaphragm is highly corrosion-resistant and has FDA and 3A certification For more details, please contact us or download the catalog.

The FB5C back pressure regulator provides appropriate hard seats and a variety of diaphragms and O-ring materials for sterile back pressure applications. The FB5C operates by sensing the pressure or back pressure of the fluid supplied from the side-mounted inlet to the underside of the diaphragm. Back pressure above the set pressure compresses the spring through the load force of the diaphragm, causing the stem to function in an open state from the seat. As the flow rate increases and the back pressure is discharged, the forces of the spring and diaphragm are relieved, allowing the stem to return to its normally closed position. Changing the set pressure can be easily done by simply turning the adjustment screw to increase or decrease pressure within the range of the regulator spring settings. !! For more details, please contact us or download the catalog !!

3A certified. Liquid contact surface finish: 32Ra/0.8μm FB6903 is necessary to protect the product from backflow. The valve remains open due to forward fluid flow. If the flow is interrupted, the plug is held against the seat by a spring, closing the valve due to backflow. This valve is used in many sanitary applications and is a 3A certified product in accordance with the 58-01 standard. <Specifications> - Connection diameter: 1/2" to 4" - Connection type: Sanitary clamp - Body style: 3-part - Body material: 316SS - Seat material: EPDM or Viton - Metal surface finish: Liquid contact area 32Ra/0.8μm or further treatment - Pressure rating @ room temperature: 0.966MPa - Industrial standards and testing: 3A certification - 1/2" and 3/4" cracking pressure: < 0.069MPa - 1" to 4" cracking pressure: < 0.035MPa !! For more details, please contact us or download the catalog !!

This sanitary valve complies with ASME BPE guidelines and can be widely used in clean utilities, sanitary processes, and aseptic equipment. With high rangeability, excellent characteristic trim, and superior diaphragm, it establishes large capacity, high temperature, and high pressure resistance, making it suitable for sterilization processes, buffers, WFI, acid measurement, clean gas, and steam services. This valve is the optimal product for controlling pressure, temperature, flow rate, and other variable quantities. Features: - Specially designed diaphragm seals and components ensure extremely high frequency and long-term use. - Jorlon diaphragm - capable of continuous operation under high-pressure steam - fully compatible with CIP and SIP. - Self-draining, meaning that the angle body type is self-draining when installed vertically (full bore) or horizontally (except for 3-inch), but the inline type with 1-inch, 1-1.5-inch, and 2-inch horizontal E-type bodies does not have self-draining capability. - No sliding parts in the wetted area, eliminating particle generation. - Easy disassembly and assembly.

Dedicated regulator for sanitary processes. The structure and materials meet the requirements of sanitary processes, providing extremely stable control. - Sanitary pneumatic signal spring-set composite pressure reducing valve. - The Mk96 pneumatic signal input type (AA) has the same pipe diameter, Cv value, seat material, low droop characteristics, and stability as the standard Mk96, along with additional advantages. - The pneumatic signal connects to a 1/4 inch NPT (female) pipe on the housing, allowing for remote pressure settings via manual setting regulators or electro-pneumatic regulators, eliminating the need for skilled operators. <Applications> - Pharmaceuticals - Biotech - Healthcare - Food - Beverages, etc. For more details, please contact us or download the catalog.

Sanitary back pressure reducing valve, pneumatic signal/spring setting composite - The Mk95 pneumatic signal input type (AA) has the same pipe diameter, Cv value, seat material, low droop characteristics, and stability as the standard Mk95, along with additional advantages. - The pneumatic signal connects to a 1/4 inch NPT (female) pipe on the housing, allowing for remote pressure setting via a manual setting regulator or electro-pneumatic regulator, eliminating the need for skilled operators. - The Mk95AA and Mk95FTAA allow for changes in the set pressure. - Adjustments can be made with manual settings using springs, and can be performed with pneumatic pressure exceeding the minimum spring setting values (0.014MPa for 3/4 inch, 0.021MPa for 1-1/2 inch, 0.035MPa for 2 inch). - Users can adjust the minimum setting value with springs (0.014MPa for 3/4 inch) or the minimum pressure typically used (e.g., sterilization pressure), and further change the set value using pneumatic pressure. - To decrease an existing set value, it can be lowered in a similar manner. For more details, please contact us or download the catalog.

CEMS (Continuous Emission Monitoring System) and Process Analysis - Perma Pure is the sole manufacturer of Nafion tubes, which are highly selective permeable membranes. - Traditional coolers reduce unwanted moisture from many sample gases, but in specific applications, Nafion's membrane drying capability allows for the proper removal of sufficient water vapor without dissolving water-soluble acidic gases. - This Nafion-based solution utilizes the unique properties of the material to enable the removal of water vapor without dissolving water-soluble acidic gases. - By removing moisture, interference from moisture is eliminated, improving measurement accuracy. It lowers the temperature of analyzers, other components, and heating lines, protecting them and reducing maintenance costs. For more details, please contact us or download the catalog.

Precise control of liquid, gas, or steam flow. We provide reliable, high-performance solutions. - Small flow control valves and pressure reducing valves are often used for OEMs, laboratories, and pilot plants. - These applications always require the replacement of valve trims to meet various flow demands for each use case. - We focus on adaptable designs and recognize the value of producing our products, which is why the LowFlow series control valves have many Cv values and flow characteristics for each pipe diameter. - This control valve does not require special tools for trim replacement, and the bolted body design eliminates the need to remove the valve from the piping during trim replacement or repairs. - The LowFlow series clearly demonstrates "true versatility." While other manufacturers develop products for specific applications, we strive to accommodate a wide range of industries and use cases. The LowFlow series can be used for applications ranging from cryogenic -254°C to high temperatures of 538°C. For more details, please contact us or download the catalog.

Simple structure, excellent performance. For liquids and gases. Products include self-operated, high flow, differential pressure, vacuum, air-operated, and pilot-operated types. For over 60 years, we have earned the trust of companies around the world with Jordan valves for various applications. • Innovation: Our capable technical team is dedicated to designing innovative new products and further developing existing products for our customers. • Trusted Partner: We assist our customers in improving usability, reducing risks, and enhancing profits. Our technical and sales departments provide reliable solutions and products you can trust. • Customer-Centric: With our unparalleled range of products, technical department, and after-sales service, we support our customers in achieving reliable results. Low operating costs, best performance, long lifespan, risk reduction, and high productivity. • Commitment: No one wishes for unintentional downtime or product failures. At Jordan Valves, we are firmly committed to designing innovative and reliable products as a standard. For more details, please contact us or download our catalog.

Manual and automatic ball valves. General-purpose, high-performance, flange connection type. Various body materials and high-temperature specifications. ★ Marwin's 3000, 5000, 6000, 7000, and 10000 series ball valves are cast in the United States and manufactured, assembled, tested, and shipped under complete quality control using the latest high-speed CNC machines at the ISO9001 certified Marwin Cincinnati factory. ★ Marwin's ball valves are available in various types including 2-piece, 3-piece, flange type, and three-way valves, with a selection of materials such as Duplex, Monel, Alloy 20, Hastelloy, bronze, carbon steel, and stainless steel. ★ A wide range of seat and seal materials is available for seals, and accessories such as actuators are also well-equipped. For more details, please contact us or download the catalog.

High-reliability products for strict fluid control applications. Suitable for low, medium, and high-pressure applications. Demo units are also available for loan. - The Rotork Fairchild PAX1 is ideal for precise regulator control made by Fairchild. - The PAX1 can control pressures up to 20.68 MPa in remote and hazardous environments. - The PAX1 moves bidirectionally with its built-in motor, but there is no connectivity to oppose or work in conjunction with the regulator's spring. - The PAX1 maintains its final position in the event of power or control signal loss. <Features and Benefits> • Setting range from vacuum to 20.68 MPa • Maximum stroke speed of less than 10 seconds • Weatherproof IP66/IP68/Type 4X/Type 6P • Temperature range -40 to +80ºC • Power consumption of less than 1W during standby/unresponsive in remote locations • Optional analog control and feedback • User-defined stroke settings For more details, please contact us or download the catalog.

The SIS VISION device consists of sensors, related equipment, software, and a touchscreen. By selecting the optimal and simple number and arrangement of sensors for the customer's equipment, reliable monitoring of the full width of the code material is possible online at full production speed. ROLAND ELECTRONIC's new technology reliably evaluates wire position and density (EPDM = Ends Per Decimeter) as well as the distance between wires. - Online quality monitoring of the distance and position of steel wire, adaptable to production speed - New high-resolution sensors realize the actual conditions of EPDM/EPI For more details, please contact us or download the catalog.

Are you facing challenges with high-pressure piping, tanks, or containers? The solution may be a rupture disk. ★ ZOOK is a global market leader that has been manufacturing high-quality metal and graphite rupture disks and other pressure relief products for over 90 years. ★ ZOOK has offices in four locations: the United States, the United Kingdom, Canada, and Malaysia, with state-of-the-art manufacturing facilities in Canada and the United States. ★ Our graphite division is the world's first and largest graphite company, committed to manufacturing high-quality impermeable graphite rupture disks through innovative and excellent service. ★ ZOOK is the first manufacturer of graphite rupture disks to obtain ASME code UD stamp and certification. ★ We invest significantly in the development of cutting-edge technology and production facilities to maintain our competitiveness in the market, enabling us to provide comprehensive solutions, including optimal product selection and sizing for our customers. For more details, please contact us or download our catalog.

- ZOOK has over 90 years of experience in the manufacturing of rupture discs, rupture vents, and other pressure relief products in locations around the world. - ZOOK is recognized as a leader in providing metal and graphite rupture disc solutions for the chemical processing, oil refining, OEM, pharmaceutical, food and beverage, transportation, and powder/bulk industries worldwide. - ZOOK continues to innovate new products that can provide overpressure protection solutions around the globe. For more information, please contact us.

Are you struggling with precise control? If so, we offer electro-pneumatic converters, pressure regulators, pneumatic relays, and volume boosters. ★ For over 60 years, Fairchild Industrial Products Company has maintained an excellent reputation as a manufacturer of precise and high-quality pneumatic and electro-pneumatic control devices. ★ Our industrial control devices provide a wide variety of precise pneumatic and electro-pneumatic control equipment for processes, machine tools, robots, and OEM applications. ★ The development technology of our four main products—pneumatic regulators, volume boosters, relays, and electro-pneumatic regulators—forms the foundation of our growth and advanced enterprise. ★ We are an ISO 9001 certified company, and our electro-pneumatic control devices are authorized to display the CE mark. <Main Products> - Pressure Regulators - Electro-Pneumatic Regulators - Volume Boosters - Relays - Other Accessories For more details, please contact us or download the catalog.

Compact, high purity, low pressure setting back pressure regulator ★J-Pure is designed as a back pressure regulator specifically for low pressure gas applications in accordance with ASME BPE for sanitary use. ★Conventional small diameter diaphragm back pressure regulators (and PRVs) had a minimum setting pressure of approximately 34.5 kPa. Settings lower than this could not be stabilized. ★JSBLP is the first back pressure regulator with a compact body and a large diameter diaphragm that can be set as low as 7 kPa. <Features> • The large diameter diaphragm effectively increases sensitivity required for ultra-low pressure settings • Durable Jorlon diaphragm material ensures extremely long life and is compatible with CIP and SIP, conforming to FDA and USP Class 6 • Screw connection at the bottom of the diaphragm, with no residual areas for particulates • Inline detachable trim reduces maintenance time • Solid steel material guarantees uniformity and surface finish • High flow rate and high rangeability • Soft seat provides ANSI Class 6 shut-off characteristics For more details, please contact us or download the catalog.

Compact, high purity, low flow back pressure regulator The JSBLF regulator is a fully draining compact back pressure regulator designed for low flow gas and liquid applications in accordance with ASME BPE for sanitary use. • The lower part below the diaphragm eliminates any residual micro-particles through a threaded connection. • Fully draining (the first of its kind in compact sanitary regulators) and compatible with CIP/SIP. • The simple trim design allows for trim replacement and cleaning without removing the valve from the piping. <Features> • Inline detachable trim reduces maintenance time • Solid steel material ensures uniformity and surface finish • Minimizes internal volume • The critical Jorlon diaphragm material offers extremely long life and is compatible with CIP/SIP, meeting FDA and USP Class 6 standards • Soft seat provides ANSI Class 6 shut-off characteristics For more details, please contact us or download the catalog.

Compact, high purity, low pressure, low flow, back pressure regulator JSBLFLP is a fully draining compact back pressure regulator designed for low flow, low pressure gas and liquid applications in accordance with ASME BPE for sanitary use. • The lower part below the diaphragm completely eliminates screw connections and residual contaminants. • Fully draining (the first of its kind in compact sanitary regulators) and compatible with CIP/SIP. • Simple trim design allows for trim replacement and cleaning without removing the valve from the piping. <Features> ★ Inline detachable trim reduces maintenance time. ★ Solid steel material ensures uniformity and surface finish. ★ Minimizes internal volume. ★ Large diameter diaphragm effectively increases sensitivity required for ultra-low pressure settings. ★ Soft seat provides ANSI Class 6 shutoff. ★ Durable Jorlon diaphragm material offers extremely long life, is compatible with CIP/SIP, and meets FDA and USP Class 6 standards. For more details, please contact us or download the catalog.

Control valve for sanitary processes. Ideal for pressure, temperature, flow rate, pH, or other displacement control. ★ The FBCV O-ring series is a control valve for sanitary processes selected by users with O-ring stem seals, designed to meet strict specifications. ★ This series is suitable for various applications in cosmetics, dairy products, and food and beverage manufacturing. ★ FBCV complies with 3A standards and adequately addresses a wide range of fluids in sanitary system utilities and processes. ★ FBCV is a control valve for liquid, gas, and steam services, equipped with high rangeability, characteristic trim, high capacity, and excellent temperature and pressure ratings, along with material selection for seals. ★ FBCV can be trusted as the appropriate equipment for your process in any of the pressure, temperature, flow rate, pH, or other displacement controls. <Features> - FDA Buna-N, +107℃ - Wetted parts mechanically polished to a finish of -0.8μm Ra - standard - Easy maintenance - simple disassembly and assembly for sanitary maintenance For more details, please contact us or download the catalog.

3A Certification, Cavity-Filled Ball Valve <Features> • Same inner diameter as connection sizes from 1/2" (DN15) to 4" (DN100), with no obstructions in the flow path for excellent drainage • Pressure rating of 6.89MPa for sizes 1/2" - 2" and 4.14MPa for sizes 2-1/2" - 4" • PTFE cavity-filled seat • Surface finish of wetted parts is 0.8μm Ra • Locking mechanism on the handle eliminates accidental opening and closing • ISO 5211 actuator mounting flange • Easy-to-remove design for maintenance • Anti-blow stem • Smooth finish with no sharp edges on internal edges • Sanitary clamp connection For more details, please contact us or request a catalog.

Are you struggling with back pressure control? If so, we have precision back pressure control regulators from Rotork Fairchild available for you. ★ For over 60 years, Rotork Fairchild has maintained an excellent reputation as a manufacturer of precise and high-quality pneumatic and electro-pneumatic control devices. ★ Our industrial control devices offer a wide variety of precision pneumatic and electro-pneumatic control equipment for processes, machine tools, robots, and OEM applications. ★ The development technology of our four main product types—pneumatic regulators, volume boosters, relays, and electro-pneumatic regulators—forms the foundation of our growth and advanced corporate status. ★ We are an ISO 9001 certified company, and our electro-pneumatic control devices are authorized to display the CE mark. <Main Features> - High reliability - High quality - Customer focus - Low cost - Extensive product range For more details, please contact us or request a catalog.

Are you struggling with vacuum control? If so, we have precision vacuum control regulators from Rotork Fairchild available for you. ★ For over 60 years, Rotork Fairchild has maintained an excellent reputation as a manufacturer of precise and high-quality pneumatic and electro-pneumatic control devices. ★ Our industrial control devices offer a wide variety of precision pneumatic and electro-pneumatic control equipment for processes, machine tools, robots, and OEM applications. ★ The development technology of our four main product types—air pressure regulators, volume boosters, relays, and electro-pneumatic regulators—forms the foundation of our growth and advancement as a company. ★ We are an ISO 9001 certified company, and our electro-pneumatic control devices are authorized to display the CE mark. <Main Features> - High reliability - High quality - Customer focus - Low cost - Extensive product range For more details, please contact us or request a catalog.

Are you struggling with precise pressure control? If so, we have the precision pressure control regulators from Rotork Fairchild available for you. ★ For over 60 years, Rotork Fairchild has maintained an excellent reputation as a manufacturer of precise and high-quality pneumatic and electro-pneumatic control devices. ★ Our industrial control devices offer a wide range of precision pneumatic and electro-pneumatic control equipment for processes, machine tools, robotics, and OEM applications. ★ The development technology of our four main products—pneumatic regulators, volume boosters, relays, and electro-pneumatic regulators—forms the foundation of our growth and advancement as a leading company. ★ We are an ISO 9001 certified company, and our electro-pneumatic control devices are authorized to display the CE mark. <Main Features> - High reliability - High quality - Customer focus - Low cost - Extensive product range For more details, please contact us or request a catalog.

The groundbreaking compression technology delivers unique, clean, and high-flow output with unparalleled efficiency while maintaining quiet operation. HASKEL embodies the reliability and safety that your company expects. Q-Drive has brought innovation to gas transfer and compression. Based on smart servo electric technology, Q-Drive achieves efficiency, cleanliness, and quiet compression. This innovative booster is designed to meet optimal performance and high flow demands. <Advantages> ■ Compact design with no loss of flow or pressure ■ Excellent design allows for the fastest seal component replacement in its category ■ 25% reduction in cooling energy compared to standard hydraulic intensifiers ■ Advanced diagnostic systems reduce maintenance and extend operating time ■ Simple design minimizes the number of failure-prone parts and minimizes maintenance ■ Extremely energy-efficient and environmentally friendly For more details, please download the catalog or contact us.

Are you struggling with micro-pressure control? If so, we offer precision micro-pressure control regulators from Rotork Fairchild. ★ For over 60 years, Rotork Fairchild has maintained an excellent reputation as a manufacturer of precision and high-quality pneumatic and electro-pneumatic control devices. ★ Our industrial control devices provide a wide range of precision pneumatic and electro-pneumatic control equipment for processes, machine tools, robots, and OEM applications. ★ Our four main product lines—pneumatic regulators, volume boosters, relays, and electro-pneumatic regulators—form the foundation of our growth and advancement as a leading company. ★ We are an ISO 9001 certified company, and our electro-pneumatic control devices are authorized to display the CE mark. <Main Features> - High reliability - High quality - Customer focus - Low cost - Extensive product range For more details, please contact us or request a catalog.

- The robust body and metal trim components are machined from ASTM A479 316L stainless steel bar stock, with ASME BPE SF5 (0.5Ra micrometers electropolished) as the standard. - Durable Jorlon diaphragm and Teflon, PEEK, or EPDM sheets/seals, all made from FDA-certified and USP Class VI compliant materials. - These structural materials can meet the rigors of SIP and CIP processes upon request. - The new EPDM sheet reduces lock-up to below 17 kPa. <Features> - The underside of the diaphragm has no exposed screw connections. - The inline removable sheet/trim allows for easy cleaning and maintenance. - The bar stock structure ensures material integrity and surface treatment. - High flow characteristics effectively reduce trim size while maintaining high range availability. - Minimization of internal volume. - Excellent Jorlon diaphragm material contributes to long life and CIP/SIP compatibility. - Soft sheet material has ANSI Class VI shut-off characteristics. - The new EPDM sheet offers low lock-up and high shut-off capability for applications with stagnant flow or blocked blankets. For more details, please download the catalog or contact us.