All products and services
31～57 item / All 57 items
-
[Case Study] Instant Removal of Sulfur-Based Gas in a Tire Factory
Conduct an investigation into sulfur-based gases generated in the sulfurization process and diagnose the risks. Prevent equipment failures with gas removal devices and improve factory operating rates.
last updated
-
[Case Study] Measures against corrosive gases generated from the wastewater discharge of a meat processing plant.
Measures against corrosive gases (hydrogen sulfide gas) generated from the wastewater treatment facility have been implemented. This has eliminated equipment failures and contributed to improving the factory's operating rate.
last updated
-
Ideal for exhaust gas flow rate and velocity measurement - porous pitot tube bar flow tube.
We have extensive experience in measuring exhaust gas flow nationwide. We can also accommodate special materials such as SUS310, Hastelloy, and titanium, in addition to SUS316.
last updated
-
One-shot removal. A chemical adsorbent that removes formaldehyde gas.
Purafil Select is a chemical adsorbent that removes harmful formaldehyde gas through a chemical reaction. Since it removes it through a chemical reaction, there is no concern about re-release.
last updated
-
Chemical adsorbent for complete removal of ammonia gas: Puracarb AM
It is a chemical adsorbent that can remove ammonia gas in chemical reactions. It is ideal for interference gas measures against ammonia in gas analyzers.
last updated
-
Visualizing corrosion environment levels. Corrosion gas test specimens. Compliant with ISA standards.
We will conduct a risk analysis of on-site electronic equipment through environmental testing in accordance with ISA71.04-1985, and visualize the corrosion risk on-site.
last updated
-
Volcanic gas observation system continuously monitors H2S gas and SO2 gas measurements.
This is a device that monitors volcanic gases generated in volcanic tourist areas, geothermal power plants, and hot spring areas. It monitors harmful volcanic gases to the human body and provides warnings.
last updated
-
Static Mixer Mixing Evaluation Experiment
We conducted a mixing comparison test using plate-type (2800 series) and screw-type (Kenics type) MSE static mixers.
last updated
-
Calibration gas generator CAL2000, ideal for adjusting gas alarms.
It is a portable calibration gas generator. Since it can generate gas on-site, it is ideal for the maintenance of gas detectors.
last updated
-
Power watch that monitors abnormalities in power sources (outlets) such as momentary stops.
A data logger that monitors abnormalities in outlets such as momentary interruptions, voltage surges, voltage drops, and frequency fluctuations. It checks the electrical safety conditions on-site before the introduction of electrical equipment.
last updated
-
Instantly measures formaldehyde gas concentration. Formaldehyde meter HTV.
Instantly measures the concentration of formaldehyde gas generated during the molding process of polyacetal resin (POM) for gears and similar products. Ideal for safety management in molding sites.
last updated
-
Chlorine gas removal: Chlorine gas removal filter system using chemical adsorbents.
It is a device for removing chlorine gas generated during the cleaning of products. By removing chlorine gas, it protects the control equipment in the cleaning process from corrosion caused by chlorine gas.
last updated
-
Ideal for exhaust gas measurement. Continuous purge type polynomial Pitot tube bar flow tube.
To prevent clogging of the measurement hole, which is a weakness of the Pitot tube, continuous purging is performed during measurement to prevent blockages. It is ideal for measuring flow rate and flow velocity in large-diameter flues.
last updated
-
Ideal for inline mixing of sodium hypochlorite. Static mixer 2800.
An inline mixer that can stir using only an inline plate. Ideal for mixing sodium hypochlorite and for stirring and mixing during chemical dosing neutralization.
last updated
-
Water treatment, suitable for inline mixing of coagulants. Static mixer 2800.
A static mixer that can perform mixing with just an inline plate. Suitable for mixing and agitation of coagulants in individual liquid separation.
last updated
-
Investigation service for the cause of corrosion (hydrogen sulfide gas) occurring at wastewater treatment plants.
The equipment failure at the wastewater treatment facility may be caused by hydrogen sulfide gas. We will conduct a site investigation for the invisible hydrogen sulfide gas and assist with countermeasures.
last updated
-
Hydrogen sulfide gas countermeasure 'Koro Shooter' from food factory wastewater facilities.
Instant removal of hydrogen sulfide gas generated from wastewater facilities of sugar factories, meat processing plants, beverage factories, canneries, etc. Protects control equipment from hydrogen sulfide gas.
last updated
-
Hydrogen sulfide gas countermeasure 'Koro Shooter' from pulp and waste paper processing
One-time removal of hydrogen sulfide gas generated from the sulfuric acid treatment and wastewater treatment facilities of recycled paper, board, and cardboard manufacturing plants. Protects control equipment from hydrogen sulfide gas.
last updated
-
Hydrogen sulfide gas remover 'Koro Shooter'
Instant removal of hydrogen sulfide gas. We protect equipment by removing hydrogen sulfide gas generated from vulcanization in tire and rubber factories.
last updated
-
Low pressure loss multi-hole pitot tube for measuring flow rate and velocity in piping.
It is a differential pressure flow and velocity sensor, a porous Pitot tube "Barflow tube." Compared to orifice flow meters, it allows for low pressure loss and energy-saving measures.
last updated
-
Formaldehyde measuring instrument "Formaldehyde Meter htV"
Supports high concentration measurements in working environments! Formaldehyde measuring instrument with minimal influence from coexisting gases.
last updated
-
Integrated rectifier Pitot tube "DynaFlow"
Air supply and exhaust flow monitoring! This is a pitot tube with an integrated rectifier that achieves zero straight pipe length.
last updated
-
Air-drying phenolic resin-based corrosion-resistant coating paint
Ideal for use in corrosive gas, saline corrosive environments, and high humidity locations!
last updated
-
Control Panel Purification Unit 'Koro Shooter'
Removal efficiency of corrosive gases is over 95%! It reduces maintenance frequency and prevents major damage to control equipment in advance. *We will exhibit at the Sewerage Expo '25 in Osaka.
last updated
-
Temperature and humidity data logger
Data logger for temperature and humidity measurement in confined spaces
last updated
-
Button temperature data logger
High-performance data logger in button battery size.
last updated
-
Waterproof temperature data logger
Waterproof temperature data logger
last updated
