Doctor Tension Type 4 / Three-Star Belt

<Contributing to SDGs (Decarbonization and GX)> Non-contact ultrasonic belt tension meter. It reads the belt's vibration frequency with a small microphone and instantly displays the belt tension.

Features - Wide range of measurable belts Compatible with various belts such as timing belts, flat belts, V-belts, and V-ribbed belts. - Simultaneous display of belt vibration frequency and tension value With a two-line display, frequency and tension values can be checked on the same screen. - Two types of unit display selectable The unit switch allows for display in either [kgf] or [N]. - Wide measurement frequency range Can measure a broad frequency range of 10.0 to 999 [Hz] (upper three digits). - Short measurement time due to unique high-speed data processing By adopting a high-performance single-chip microcontroller and unique data processing, tension measurement can be performed in a short time (as short as 0.5 seconds). - Memory function included Can store 10 types of tension measurement data and 89 types of unit mass data. - Auto power-off function included The power will automatically turn off after 5 minutes of inactivity, preventing battery drain due to forgetting to turn off the power switch. - Switchable between Japanese and English By pressing and holding the "0" and "Enter" keys simultaneously when powering on, the display can be switched between Japanese and English.

[Official] A must-see for customers in Aichi, Gifu, Shizuoka, and Mie, Tokai area! Visit the Catex homepage.

basic information

Measurement Method 1. Always turn off the power (switch) of the drive device and confirm that the belt is stationary. 2. Turn on the power of this device, set the microphone sensor, and input the necessary measurement conditions. 3. Fix the belt and the microphone sensor facing each other at a position of about 10mm near the center of the span. 4. Lightly tap the surface of the belt with the handle of a screwdriver or similar tool to induce vibrations in the belt. 5. Repeat steps 1 to 4 multiple times and record the average of the values read by this device.