【Proven track record in the semiconductor industry】Short delivery time available Air blow gun and pure water cleaning gun
Air blow gun and pure water cleaning gun made of resin, suitable for clean room use, with a delivery time of approximately 1 week for small quantities.
Our gun products are domestically produced and use ABS and PP resins, which have low risks of supply instability for materials. Therefore, for small quantities, we can accommodate delivery within about one week. Since these are resin-based gun products, they are suitable for environments where the leaching of metal components is not allowed. Additionally, the air blow gun is equipped with a hollow fiber membrane filter with a filtration precision of 0.01μm at the gun tip, eliminating concerns about contamination. Because no grease is used in the valve, they can be used in clean rooms of semiconductor factories. ■ Air Blow Gun Product Introduction Page https://www.ipros.jp/product/detail/159520001 ■ Pure Water Cleaning Gun Product Introduction Page https://www.ipros.jp/product/detail/159520002 ■ Inquiries about the products - Industrial Filter Sales Department, Eastern Japan Sales Office TEL: 03-5568-9281 - Industrial Filter Sales Department, Western Japan Sales Office TEL: 06-6533-0360
basic information
■ Air Blow Gun - Equipped with a hollow fiber membrane with a filtration precision of 0.01μm at the tip - Made of resin, eliminating concerns about rust and lightweight - Clean room specification - Oil-free - Maximum operating pressure of 0.4MPa - Options for coil hose and pipe fittings available ■ Pure Water Cleaning Gun - Made of resin, eliminating concerns about rust and lightweight - Clean room specification - Oil-free - Maximum operating pressure of 0.4MPa - Options for coil hose, pipe fittings, and nozzles available
Price information
The following page contains the listed prices. ■ Air Blower Gun Product Introduction Page https://www.ipros.jp/product/detail/159520001 ■ Pure Water Cleaning Gun Product Introduction Page https://www.ipros.jp/product/detail/159520002
Price range
P2
Delivery Time
P3
Model number/Brand name
Air Blower Gun - Pure Water Cleaning Gun
Applications/Examples of results
- Maintenance of semiconductor cleaning equipment (wafer batch cleaning devices, single-wafer cleaning devices, grinders, dicing machines, etc.) - Cleaning of electronic substrates and quartz tubes - Maintenance of clean benches, chemical atmosphere draft chambers, and isolators - Cleaning of medical devices and maintenance of medical sinks - Nitrogen gas filling (air blow gun) - Cleaning of pure water tanks - Cleaning of chemical supply tanks - Sampling applications for distilled water, pure water, and ultra-pure water devices (water gun) ★ Perfect connection with medical instrument suction tubes! The suction tube cleaning gun can be found at the following link! ↓ https://www.kitzmf.com/medical/4189 Water Gun WGN-Q2(2M) ★ Perfect connection with cleaning ports! The surgical support robot instrument cleaning gun can be found at the following link! ↓ https://www.kitzmf.com/medical/4187 Water Gun WGN-R2(2M)
Line up（24）
| Model number | overview |
|---|---|
| CAGN-14 | ABS gun body (for clean rooms) |
| AGN-14 | ABS gun body (for general industry) |
| CAGNH-14 | ABS gun body (filterless type) |
| CAGN-P-14 | PP gun body (clean room specification) |
| CAGNC-80N1-14 | Replacement filter cartridge for clean rooms (set of 2) |
| AGNC-80N1-14 | Replacement filter cartridge for general industry (set of 2) |
| HOSE-1 | Coupler type coil hose (made of urethane resin) |
| HOSE-P-1 | Screw type coil hose (PP-based polyolefin) |
| TS-2WS（TS-2NZP） | R1/4 socket (optional part for HOSE-1) |
| TS-3WS（TS-3NP） | R3/8 socket (optional part for HOSE-1) |
| TS-4WS（TS-4NP） | R1/2 socket (optional part for HOSE-1) |
| HOSE-P-1 | R1/4 screw type coil hose (made of PP) |
| BZ03-02M | R3/8 bushing (optional part for HOSE-P-1) |
| BZ04-02M | R1/2 bushing (optional part for HOSE-P-1) |
| CAGNL-14 | Long nozzle (total length 150mm) |
| WGN-1 | Gun body + hose nipple (φ8.8) included |
| WGN-2 | Gun body + blade hose |
| WGN-3 | Gun body + blade hose with bacteria growth prevention feature |
| HOSE-WP-1 | Dedicated coil hose for WGN1 |
| WGN-J1/4 | R1/4 joint (WGN-2 blade hose optional joint) |
| WGN-J3/8 | R3/8 joint (WGN-2 blade hose optional joint) |
| WGN-J-1/2 | R1/2 joint (WGN-2 blade hose optional joint) |
| WGN-VJ-14 | Flat nozzle (optional part) *Water sprays in a fan shape |
| WGN-FJ-14 | Full cone nozzle (optional part) *Water sprays in a conical shape |
