Ball Screw Grinding Unit 'SFBS-UN'

Unlike hand grinding, this grinding unit is not affected by the operator's level of experience!

The "SFBS-UN" is a grinding unit specifically designed for ball screws and external diameter screw grooves. The vertical mechanism improves the uniformity of the finish on both sides of the screw grooves. It is capable of achieving surface precision of Ra 0.1 to 0.05, which was not possible with conventional methods. Additionally, by feeding the tape while grinding, it can consistently finish with a new abrasive surface. 【Features】 ■ Improved uniformity of the finish on both sides of the screw grooves due to the vertical mechanism ■ Achieves surface precision of Ra 0.1 to 0.05, which was not possible with conventional methods ■ Surface precision improves in a short time, allowing for a uniform surface finish ■ Consistently finishes with a new abrasive surface ■ Unlike manual grinding, it is not significantly affected by the operator's experience *For more details, please refer to the PDF document or feel free to contact us.

basic information

【Standard Specifications】 ■Polishing Tape: 10mm for external diameter screw grooves ■Power Supply: AC200V ■Air: 0.4MPa ■Device Size: W275.5×L495×H360 ■Weight 　・Main Unit: Approximately 38kg 　・Controller: Approximately 13kg *For more details, please refer to the PDF document or feel free to contact us.