Motor-related device 'SCL-7WBA'

The brush mechanism allows for the removal of burrs and chips generated during cutting.

The "SCL-7WBA" is a fully automatic machine that transports motors introduced from the previous process into the device using lift & carry, performs rough and finish cutting of the commutator, and brushes to remove chips before discharging. By supporting the shaft with a diamond V-block, it allows for commutator cutting, achieving concentricity between the shaft and the commutator. Additionally, it is equipped with a brushing mechanism that enables the removal of burrs and chips generated during cutting. 【Features】 ■ Achieves concentricity between the shaft and the commutator ■ Capable of removing burrs and chips generated during cutting *For more details, please refer to the PDF document or feel free to contact us.

basic information

【Standard Specifications (Excerpt)】 ■ Roundness: Within 3μm (affected by the roundness of the shaft) ■ Surface Roughness: 1-3s (affected by the cutting tool, feed rate, and shaft roughness) ■ Cutting Tool: Special shaving tool (optional) ■ Work Drive Method: Outer diameter belt drive method ■ Control Method: Sequencer control ■ Power Supply: 200V, 3-phase ■ Air: Dry air = 0.4-0.5MPa ■ Equipment Dimensions: 2510W * 890D * 1750H (mm) ■ Weight: Approximately 1400kg * For more details, please refer to the PDF document or feel free to contact us.