DSP-AP Laser Safety Device for Press Brake

Laser safety device DSP-AP for press brakes. Balancing safety and productivity! Ministry of Health, Labour and Welfare certification number TA569.

■Work can be performed without reducing production efficiency In conventional safety devices, there was a tendency for work efficiency to decrease. With the DSP-AP, high-speed descent is possible up to a position of 2mm above the material plate, achieving high productivity. Additionally, since high-speed descent is possible up to a position of 2mm above the material plate, the range of high-speed monitoring has expanded, resulting in improved safety compared to conventional methods. ■Smooth operation with automatic plate thickness detection function In conventional safety devices, the upper die would sometimes stop. The DSP-AP, with its material detection function, can perform bending at the appropriate pressure point even if the material discharged from the roll machine is warped or has distortions. Furthermore, due to the planar laser projection, adjusting the optical axis and moving during mold changes is easy. ■Supports various workpieces such as box bending Mode 1: All zones active Mode 2: Central zone active mode (used during box bending) Mode 3: Front and central zone active mode In normal mode, even box bending work that would block the optical axis at the front can be processed in box bending mode, where only the center optical axis is active. Additionally, even if the system stops due to shading, processing can continue by re-pressing the operation foot switch to deactivate the optical axis. (Re-pressing processing)

basic information

4. Adjusting the optical axis and moving during mold exchange is easy. Since the laser is projected in a planar manner, the optical axis can be adjusted visually using the included test piece, making it very quick and simple. During mold exchange, the main unit can be easily slid upward to a position that avoids the mold, and it can be fixed in place, allowing it to return to the same position using the stopper function. Additionally, the sensor measures the plate thickness and automatically measures the emergency stop distance. 5. Specially shaped laser that is resistant to vibrations! With nine receiving points, stronger safety is established. It employs a wide planar special-shaped laser that was well-received even with the DSP-J model. The nine receiving points are firmly captured, resulting in excellent vibration resistance and detection capability. 6. Smooth operation with automatic plate thickness detection function! In conventional safety devices, the ram could stop due to material warping or surface irregularities, but with the material detection function of the DSP-AP, even if the material discharged from the roll machine is warped or has distortions, the optical axis can be adjusted at the appropriate position for bending.