All products and services
61～90 item / All 254 items
-
Wire roll brush with screws
Introducing an example of a roll brush with threaded shafts that can be connected to a device!
last updated
-
One-week roll brush
Manufactured entirely from metal fittings! Here is an example of a roll brush made for just one complete turn.
last updated
-
Roll brush | A brush made with extremely fine brass.
Introducing a case where a brass brush with a diameter of 0.06 was wrapped around a shaft with a diameter of 6!
last updated
-
Roll brush | Stronger wire brush
Introducing an example of a roll brush with SW0.4 and hair material attached to the segmented axis!
last updated
-
Grit | Roll Brush | Even Higher Density with Tight Wrapping
Introducing an example of the Grit roll brush! It has a high density due to the close winding.
last updated
-
Nylon brush with a whetstone.
An example using grit nylon, which incorporates whetstone.
last updated
-
Brass wire can also be made into brushes.
An example of using brass, which is a soft material, as a metal-based hair material!
last updated
-
Roll brush with axis processing.
A brush made from plated single wire material is attached to the shaft with the threaded cut!
last updated
-
Leave the installation on large equipment to us!
Large R processing is also possible! Here are examples of brushes installed on large equipment.
last updated
-
This is a horsehair brush often used for machines related to paper.
Cut the ring brush in half and attach it to the fixture with welding! Animal hair that is less likely to generate static electricity.
last updated
-
Wire ring brush
Introducing examples of wire ring brushes! The hair at the joints will be reduced.
last updated
-
Ring brush | One-time wrap is a ring brush
A roll brush with only one loop is called a ring brush!
last updated
-
Coil brush | Using wire
We would like to introduce an example of a wire hair material coil brush!
last updated
-
Coil brush
A brush without the axis of a roll brush is used for unexpected purposes!
last updated
-
Heat-resistant and chemical-resistant PPS brush.
An example of a dragonfly brush made with heat-resistant and chemical-resistant PPS fibers!
last updated
-
Brushes for attaching to routers and drills.
A channel brush is coiled and attached to a shaft, with a mounting part of φ8 manufactured, allowing it to be attached to equipment and drills.
last updated
-
We also accept stepped shafts.
Increasing the diameter of the axis where the brush wraps will allow you to increase the amount of hair!
last updated
-
You can gradually shear the wool.
An example of a brush that has been gradually trimmed! Such processing is also possible.
last updated
-
Thunderon Roll Brush
It is made from a fiber called Thunderon, which has anti-static properties!
last updated
-
It can also be wrapped around thick shafts.
An example of a brush wrapped around a shaft that has been processed with a pipe and boss machining with steps!
last updated
-
If you don't want to get hurt, it's goat hair.
It is made of soft material, so it is used when you don't want to scratch the items being cleaned!
last updated
-
De-static effect | Thunderlon's roll brush
It has a static electricity effect! An example of a pitch-wound brush made with Thunderon.
last updated
-
Polishing steel plates and deburring | Grit comb brush
An example of a roll brush made with coarse nylon! It is also called a "tombo brush."
last updated
-
We also make roll brushes using the same bristle material as scrubbing brushes.
It is often used for scrubbing brushes, an example of a brush made with palm fibers!
last updated
-
Horse hair brush
The hair is soft! It is often used in places where paper, such as for printing, is used.
last updated
-
A small roll brush with greater strength than a twisted brush.
Using channel 2, it is possible to produce smaller brushes! Example of a small brush with an outer diameter of φ30.
last updated
-
A roll brush type that is attached to an axis after being coiled.
It may also be attached to the shaft after being processed into a coil shape! Green nylon is used.
last updated
-
Green brush that is easy to find even when the hair material is cut.
Green is adopted to make it easier to identify when hair that has been cut gets mixed in at the food factory!
last updated
-
Spiral cone brush for cleaning and washing.
A roll brush with a dome-shaped tip! It is made with green nylon.
last updated
-
We also manufacture small-sized cup brushes.
It's rare to make a cup brush in green! It's normally possible to produce.
last updated