All products and services
211～240 item / All 335 items
-
When the wire comes out at the tip, it will cause a scratch.
An example of using a wire at the tip of a brush to avoid scratching the other side!
last updated
-
You can also brush the bottom of the hole with a pre-bend.
An example of a twisted brush made with grit! It can brush the bottom of the hole as well.
last updated
-
Twisted brush | Bundles of bristles at the tip
An example of a brush with a tuft resembling a pen at the tip! It can also be used for brushing at the end.
last updated
-
Deburring | Twisted brush suitable for small hole diameters
Introducing examples of twisting brushes suitable for small hole diameters! Used for deburring after hole processing.
last updated
-
Twisted brush | It's easy to turn when you attach a T-shaped handle.
Easy to use! Introducing examples of twisted brushes with a T-shaped handle.
last updated
-
Twisted brush for cleaning the neck of the bottle.
We will take the bottle and conduct a test! We also accommodate the shoulders of bottles that are difficult to clean.
last updated
-
Twisted brush that can be attached to the device.
An example of a brush with shanks on both sides for attachment to a device!
last updated
-
Twisted brush | Can also process outer diameter
Introducing an example of a twisted brush with a smaller diameter along the way!
last updated
-
Green nylon twist brush
Green nylon is often used in food factories! Here is an example of a twisted brush.
last updated
-
Twisted brush | Can also accommodate bending processing.
An example of a twisted brush bent into a "U" shape! We can also handle bending processing.
last updated
-
Twisted brush | Shank can also be attached
By installing a shank (pipe), weaknesses can be resolved! It can also be attached to the device.
last updated
-
Twisted brush | Can also process fine brass bristles
Introducing examples of brushes made with thin brass wire with a diameter of 0.1mm!
last updated
-
I took a close-up look at the twisting brush.
I took a close-up shot of a small twisting brush!
last updated
-
Seal brush | Fill in the gaps in corners
An example of a straight brush bent into an L shape! It is used for various corners.
last updated
-
Gap filling | Can be processed into various shapes
Used for seals inside machining centers and NC lathes! Examples of our main products.
last updated
-
Seal brush | Combination of R-type brush
An example of a corner section with a double structure to compensate for the often insufficient amount of hair! The balance between the amount of hair and the straight sections is well maintained.
last updated
-
Bending processing | Channel brushes can be processed.
Introducing examples of brushes bent in a "kuno" shape! Channel brushes are customizable.
last updated
-
Bending process | Can be made with a radius of 500mm.
Example of a brush with a radius of 500mm! Brushes of various sizes can be manufactured, not limited to a radius of 500mm.
last updated
-
Bend the brush | Bend, arrange, and weld
Introducing an example of a brush with R bends of different hair lengths combined into one!
last updated
-
Bending processing | Can be installed in the specified location.
Introducing an example of a brush processed with R attached to a circular metal fitting!
last updated
-
Bending process | Straight brush with R attachment
Introducing examples of "R-shaped brushes" with part of the straight brush bent!
last updated
-
You can process the pipe and pass the shaft through it.
An example of a radial brush that adopts a pipe-shaped shaft structure with a φ40 shaft passing through it!
last updated
-
Radial brush | This is a 90-degree twist.
An example of welding a straight brush to an axis to be used as a rotating brush!
last updated
-
Radial brush | Made with abrasive-filled bristles
An example of a brush made with a channel brush attached radially to the axis!
last updated
-
Flapping and tapping | Twisting to create a radial brush
Introducing examples of brushes attached radially to a channel-type brush!
last updated
-
Spiral cone | The tip looks like this.
Introducing an example of a spiral cone brush made with nylon wave hair material!
last updated
-
Spiral cone | It has not worn down.
An example of a spiral cone brush that can attach dome-shaped bristles to the tip of a roll brush!
last updated
-
Spiral cone | Can be rounded at the tip.
Here is an example of a roll brush with a dome-shaped tip!
last updated
-
Spiral cone | Can be cut to a flat top.
Introducing examples of crew cut styles that can be done neatly all the way to the corners of the inner surface of a cylindrical container!
last updated
-
Spiral cone brush with universal joint
An example of a brush with a spiral cone and a universal joint that allows the tip to bend, featuring a swivel design!
last updated