It was published in the specialized magazine "Press Technology June issue."

キョーワハーツ

The Intermold 2021 exhibition was held at Tokyo Big Sight Aomi in April. Our company's specialty, precision press-processed parts, was featured. The photo shows a part that has undergone two-stage drawing processing followed by punching. The material is brass, with a thickness of 0.64mm and a height of 4.5mm. The inner diameter is 0.7mm.

Date and time
Capital
Entry fee

Related product information

Selection Method for Appropriate Materials for Designers in Precision Deep Drawing Processing
This time, we will focus on stamping processes and explain a simple method for selecting materials suitable for stamping for designers.

For more details, please download the PDF or contact us.
Professional expertise shared! Selection of materials in the design of thin plate springs.
This document explains the key points of material selection.

For more details, please download the PDF or contact us.
Collection of Stamping Processing Examples with Automatic Press Dies
This is a collection of examples of drawing processes manufactured with progressive drawing dies using automatic press processing! Shall we solve your problems with drawing processes together?

For more details, please download the PDF or contact us.
Squeeze Process
As one of the challenges in new processing technologies, we are working on progressive deep drawing.

【Points for Mold Making】 - Design processes to machine thin draw sections without cutting, and design processes for curling sections. - Since the draw shape is irregular, creative process design is necessary. - As the corner holes will be punched later, innovative die shape design is required. - To perform progressive processing, it is important to consider where to place the connections. 【Points for Press Processing】 - Measures to address scrap generation during hole drilling at the tip of the draw. - The draw section may cut due to variations in sheet thickness. - The matching section is thin, causing the product to twist during feeding. - After cutoff, products remain on the mold, so measures are needed to discharge them. ● For more details, please contact us or refer to the catalog.
Rimming process, small diameter rimming process
This is an introduction to a product with a narrowing from the tip to the neck, featuring an inner diameter of Φ0.7.

【Features】 ○ Taper from the tip to the neck ○ Inner diameter φ0.7 【Product Specifications】 ○ Plate thickness: 0.64 ○ Height: 4.5 ○ Inner diameter: φ0.7 ○ Material: Brass ○ Application: LED-related components ● For more details, please contact us or refer to the catalog.