The exhibition has finally reached its last day! Thank you very much to all the customers who visited our booth during the event. Today is your last chance! We would be delighted if you could take this opportunity to see our products and technologies. All of our staff sincerely look forward to your visit!

Finally, it opens tomorrow! We are waiting for you at Matsumoto Machinery's booth [4-N13] at INCHEM TOKYO 2025. Please feel free to stop by!

One week until Inkem! The venue is Tokyo Big Sight, East Exhibition Hall. The booth number for Matsumoto Machinery is [4-N13]. We are waiting for everyone in front of the Special Lecture Hall A!

Original non-woven fabric bag from Matsumoto Machinery. Black with white, easy to use every day. The size is 47cm wide × 36cm high × 8.5cm deep, comfortably fits A3 documents. The president uses it daily for commuting, carrying a laptop, water bottle, folding umbrella, and gym gear. Employees have praised it as "convenient for dry cleaning" and "perfect for travel souvenirs." A red version was also made, but there were comments that it was "too flashy," so production of the black and white version has been increased. It will be distributed at INCHEM TOKYO 2025 (September 17-19 at Tokyo Big Sight). For more details, please follow the link.

9 days until Inchem! We will introduce centrifugal separation technology that solves challenges in the fields of chemistry, pharmaceuticals, and food at Tokyo Big Sight. Would you like to think together about solving challenges on-site?

The centrifugal separators from Matsumoto Machinery have a beautifully finished appearance. In fact, it is very difficult to convey their charm through photographs. Because the surface shines like a mirror, ordinary photography captures reflections of people and scenery. Therefore, we lay white paper in the factory, adjust the lighting, and even perform a final polishing before taking the photos. A single photograph requires a significant amount of effort and time. "Conveying the quality of our products accurately" is also an important mission for us. We hope that even from a single photo, you can feel a sense of security and trust!

We will be exhibiting at NCHEM TOKYO 2025! Dates: September 17 (Wednesday) to September 19 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Tokyo Big Sight, East Exhibition Hall This exhibition allows you to directly experience the latest trends in the chemical industry and the industry's current and future responses to environmental issues and digital transformation (DX). We will showcase our full-recovery horizontal centrifuge "FLOWM" and the "LAC TypeE," which allows for easy filtration testing for research and development. This is a great opportunity to see the actual products and experience the latest technology! Please be sure to visit our booth. For more details, please check the link!

Matsumoto Machinery Sales offers more than just centrifuges. We handle a variety of equipment, including pressure filtration dryers, heat exchangers, and spray dryers. Furthermore, we can provide a comprehensive proposal that includes ancillary equipment such as frames, valves, pumps, and lifts for centrifuges. Leveraging our extensive experience and network in the pharmaceutical and chemical industries, we assist in solving our customers' challenges. Please feel free to consult with us!

＼Free CAD Data Available／ Matsumoto Machinery Sales offers free CAD data for the product outline drawings of centrifuges and reference diagrams for piping and wiring systems! It's very convenient for layout design of new factories and when considering equipment updates! This is a "visualization" support that reduces the burden on field designers! Please contact us through our website!

At Matsumoto Machinery Group, we are working on the SDGs through the manufacturing of centrifuges! While contributing to human health in fields such as pharmaceuticals, food, and electronic materials, we are also challenging ourselves to environmental conservation through wastewater filtration and the reuse of cutting oils! Additionally, we are promoting a work-friendly system and paperless initiatives. We are striving to do work that will benefit future society!!

Our article has been published on the site "News Switch," which delivers news and original content from the Nikkan Kogyo Shimbun in a fresher and more approachable manner. Please check the details from the link below.

Our article has been published in the '2026 Edition: Meet Unseen Companies! Science and Engineering × Corporate Job Matching.'

Our company representative will participate as a panelist in the "Women's Empowerment and Corporate Value Enhancement Symposium." We hope that the ideas we can share, as a company that creates an environment where women can work comfortably and thrive, will be helpful to everyone. ▼For details, please see the link▼

Our article has been published in the "Chemistry Day / Chemistry Week" commemorative booklet.

The Matsumoto Machinery Group offers cloth that is compatible with HALAL certification. ▼For more details, click here▼

I've uploaded an article titled 'What is a Centrifuge in 1 Minute!' It's designed to be as simple as possible and can be read in one minute. I would be happy if those who are wondering 'What exactly is a centrifuge!?' could take a look!

The basic knowledge content of the centrifuge has been renewed! The content has changed from before, so I would be happy if you could check it again! Thank you!

【Exhibition Participation - INTERPHEX Week 2024 Tokyo PharmaLab EXPO-】 ◆ Dates June 26, 2024 (Wednesday) to June 28, 2024 (Friday) 10:00 AM to 5:00 PM ◆ Location Tokyo (Tokyo Big Sight) ◆ Booth East Hall 7, Booth Number [51-58] ↓ For exhibited products, venue map, and visitor registration, please refer to the details below. Our sales representatives will be on-site to assist with any inquiries regarding centrifuges. We look forward to your visit!

We would like to inform you that our Tokyo Sales Office has relocated to the address below as of February 26, 2024. With this move, we aim to further enhance our services and strive to meet your expectations. We appreciate your continued support. 【New Address】 6th Floor, Sansei Headquarters Building, 2-14-9 Ningyocho, Chuo-ku, Tokyo 103-0013 TEL: 03-5801-9925 FAX: 03-5801-9928 *Please note that our phone and fax numbers have also changed.

We received an inquiry from Company D, which manufactures and sells pharmaceuticals, asking if there is a lab centrifuge that considers design and handling characteristics. We proposed the LAC-2000 type E, an improved version of our LAC-2000 model, and received an order for it. We developed a modular design that thoroughly considers workflow, cleanability, appearance, and footprint through trial and error with our technical department and users. ▶ For more details, please follow the link.

We received a request from Company Z, which manufactures numerous pharmaceuticals and active ingredients, stating that they wanted to deliver a centrifuge that complies with GMP standards and can be confidently showcased during inspections to their new plant. As a result, they adopted our horizontal centrifuge, the JMP-S. They expressed that using our centrifuge has led to a reduction in the workload of operators, improved the efficiency of cleaning for multiple products, and enhanced the efficiency of verification processes. Recently, the reduction of operator burden and the cleaning capability of machines have become pressing issues, and pharmaceutical manufacturers must address these concerns. JMP is capable of providing solutions for these challenges, and we have received repeat orders since our delivery. ▶ For detailed case studies, please follow the link.

We received an inquiry from a pharmaceutical company involved in drug manufacturing, stating, "We would like to introduce a GMP-compliant centrifuge that meets DI (Data Integrity) requirements." We proposed our DMNβ model, and they placed an order with us. Our company provides centrifuges that are more suitable for drug manufacturing by equipping them with a system based on the ALCOA principles, which includes not only operational information of the centrifuge but also information on operator actions, as well as login and operation permissions based on security levels. ▶ For more details, please follow the link.

"We would like to reduce the recovery cost of stainless steel polishing powder and prevent spontaneous combustion." We received an inquiry from Company H, a metal processing company, asking if a centrifuge could be used to reduce the recovery cost of stainless steel polishing powder and prevent spontaneous combustion. Please refer to the link for specific solutions.

1: Proposal ability 2: Perseverance without giving up 3: Sense of speed We asked our customers who have been using our centrifuges for a year to directly share the reasons why they chose us. Please check the details below. Since centrifuges are essential equipment for producing our customers' important products, we strive to provide quality and service that can be used with confidence!

The Matsumoto Machinery Group declared in July 2021 that it would actively engage in information security measures by committing to the one-star "Five Principles of Information Security." ▶You can find more details at the link below.

"I want to find a way to reduce the costs associated with testing expensive drug samples. Is it possible to conduct filtration separation tests with a smaller quantity?" We received this inquiry and proposed the LAC, a research and development centrifuge that allows for effective filtration tests even with a small sample size while maintaining a solid thickness in the cake. ▶ You can check the details of our proposal at the link below.

The topic that often comes up when talking with customers is "automation and labor reduction." It seems that, at the same time that hiring people has become difficult, there is a desire to protect operators who make products from highly toxic substances such as pharmaceuticals and pesticides as much as possible. Our company also offers centrifuges that minimize human intervention through automation, tailored to your concerns. Please feel free to contact us. ▶ You can check the details of our proposal for the automation of centrifuges at the link below.

I would like to express my heartfelt sympathy to all those affected by the Noto Peninsula earthquake in Reiwa Year 6, as well as to their families. I sincerely pray for everyone's safety and for the swift recovery of the disaster-stricken areas. Matsumoto Machinery Group has started its operations for 2024 today, January 5. I look forward to your continued support this year as well.

Our year-end and New Year holiday period is as follows: [Year-end and New Year Holiday Period] December 30 (Saturday) to January 4 (Thursday) Business will resume on January 5 (Friday) at 9:00 AM. For more details, click here▼ https://mark3.co.jp/news/kyuugyou2023

We have created an easy-to-understand video showing how a centrifuge works in CG. You can see the process of putting liquid into the centrifuge, filtering it, collecting the powder, and washing it. Please take a look. ▶ The video can be found at the link.