Internal "MC Distributor" for regulated fillers

Achieving 1000 to 2000 points/m2 drip point count! Internal for regular fillers.

The "MC Distributor" is an internal component designed for regulated filling materials that achieves a groundbreaking number of drip points. The "Nozzle Overflow Type" features holes arranged on the upper surface of the pipe, allowing liquid to flow out, which prevents liquid depletion under ultra-low load conditions and enhances the uniformity of the outflow from each hole. The "Open Trough Type" expands the outflowing liquid by inclining the upper notch section. The Nozzle Overflow Type is suitable for liquids that may clog the holes. 【Features】 ■ Achieves a groundbreaking number of drip points (1000–2000 points/m²) ■ While the recirculated liquid flows out as a thin film over the diffusion plate, it comes into direct contact with the surrounding vapor, causing the temperature to rise to the boiling point (Nozzle Overflow Type). *For more details, please refer to the catalog or feel free to contact us.

basic information

【Specifications】 ■Nozzle Overflow Type 　・Liquid handling range: MIN 0.05m3/m2H MAX 80m3/m2H 　・Flow rate variable range: 1 to 10 　・Drip points: 1000 to 2000 points/m2 　・Open area ratio: 50 to 70% ■Open Trough Type 　・Liquid handling range: MIN 0.2m3/m2H MAX 80m3/m2H 　・Flow rate variable range: 1 to 5 　・Drip points: 1000 to 2000 points/m2 　・Open area ratio: 50 to 70% *For more details, please refer to the catalog or feel free to contact us.