All products and services
31～60 item / All 138 items
-
AIREX Adapter
Compatible with different diameter cores without replacing the shaft! No power supply is needed for the adapter.
last updated
-
AIREX Stripe Shaft
Introducing the stripe shaft that allows for easy on-site repair and cleaning of tube replacement!
last updated
-
[AIREX] Air Shaft Dual Support Type/Single Support Type
Core clamping/unclamping is easy! The shaft shape is manufactured to match the bearings of your equipment.
last updated
-
LPC Large Roll Guide "PGM-400"
A roll guide that connects only via connectors, making wiring work easy for controllers and sensors.
last updated
-
LPC DC Motor Driver 'PCM-D40'
The Q-series can drive all roll guides and actuators below 2.5A!
last updated
-
LPC Sensor Holder "PZM-100/PZM-200"
Even with a double-sided angle bar, the holder can be attached and detached! There is no positional shift because it is fixed diagonally.
last updated
-
LPC Analog Input Module 'PAM-10'
It is possible to connect to sensors equipped with analog outputs such as 1-5V, 0-5V, and 0-10V!
last updated
-
LPC Expansion I/O Module "PXM-100"
The input/output terminals use spring-type terminal connections, making wiring easy for the expansion I/O module.
last updated
-
LPC Remote Box 'PTM-100'
The mass including the cable is approximately 400g! Used when you want to operate near the detector or actuator.
last updated
-
LPC Reflective Sensor "PSM-2000"
Diverse web detection is possible! Teach the reference image for tracking with one touch.
last updated
-
LPC Reflective Sensor "PSM-1500"
Sensor for web serpentine control. Serpentine control based on the coating boundary of secondary batteries and positive/negative electrode materials.
last updated
-
LPC Reflective Sensor "PSM-270"
Teaching is easy! Due to its high sensitivity, it can detect even low contrast.
last updated
-
LPC Detector Holder "PZ-121"
Mainly used for reflective detectors! It is possible to fine-tune the position of the detector by turning the dial.
last updated
-
LPC Detector Holder "PZ-110"
Mainly for transparent detectors such as PS-400 and PS-711b! It is possible to finely adjust the position of the detector.
last updated
-
[LPC] Remote Box 'PT-1000/PT-800'
Remote box used when you want to operate near detectors or actuators.
last updated
-
LPC detector moving actuator "PD-200"
Position feedback is possible! Centering control can be performed.
last updated
-
LPC detector movement actuator "PD-100"
Combine with control panels such as PW-1000 and PW-800! Used when you want to manipulate the sensor position.
last updated
-
LPC Control Motor "CM-412F"
Adopt a DC motor! Please use this when designing and manufacturing the drive mechanism for your customers.
last updated
-
LPC Control Panel 'PW-1310-3'
Three bank memories are prepared for various settings! Configurations to accommodate diverse usage methods are also easy.
last updated
-
[LPC] Roll Guide "PGS-400/PGS-701"
Can also be used in clean rooms! It features high rigidity and low backlash.
last updated
-
LPC AC Servo Actuator "PDS Series"
Enhanced protective features! Equipped with AC servo motors, enabling high-precision control.
last updated
-
LPC AC Servo Motor Driver "PCS-1000"
It can be combined with actuators equipped with servo motors to achieve high-precision control!
last updated
-
LPC DC Motor Driver "PC-930"
When controlling in proportion to the input voltage, connect the PE-700 driver and the detector!
last updated
-
LPC Medium and Large Actuator "PD-850/900"
Equipped with a micro switch! This actuator is used for serpentine control, featuring a long lifespan and easy maintenance and inspection.
last updated
-
LPC Vertical Transport Actuator 'PD-650S'
Introducing a vertical transport actuator that is long-lasting and easy to maintain! Suitable for use in the direction of gravity!
last updated
-
LPC Actuator "PD-650"
Equipped with a micro switch for center position detection! Used for items weighing less than 3500 kg!
last updated
-
LPC Actuator "PD-620-100"
Long lifespan and easy maintenance! Used for items weighing less than 1200kg, with a stroke of 100mm!
last updated
-
LPC Actuator "PD-620"
Long lifespan and easy maintenance! Actuator suitable for items weighing less than 1200 kg.
last updated
-
[LPC] Actuator "PD-610"
Used for items weighing 1600kg or less! An actuator that employs a ball screw in its drive mechanism.
last updated
-
[LPC] Actuator "PD-710"
Long lifespan and easy maintenance! Ideal for installation in small spaces due to its short overall length!
last updated