【Dataway NEXT】Connection image with each device

[Production and sales will end as of December 31, 2021] Information on the connection image with each device related to the introduction.

"Dataway NEXT" is an adapter device that allows terminals to connect to optical lines while keeping the existing ISDN lines, which are set to be discontinued around 2020. This product can be used without any configuration by simply connecting the HGW (Home Gateway) and ISDN terminal (TA: Terminal Adapter) with LAN cables. 【Connection Steps】 ■ Insert the LAN cable from Dataway NEXT into the HGW ■ Insert the LAN cable from Dataway NEXT into the TA ■ Power on the Dataway NEXT ■ Power on the TA ■ Switch the ISDN terminal settings to the center's optical phone number *For more details, please download the PDF or feel free to contact us. 【Production and sales will end as of December 31, 2021】 Please refer to the related links for more information.

basic information

【Installed Equipment】 ■Router (HGW, OGW) - It will be automatically registered for the internal extension allocation of the Hikari phone settings. - If the router has already been installed, and it is not automatically registered, please configure it from the router's web settings to free up the extension number. - If the router is an OGW, after allocating the Dataway NEXT to the internal extension, individual settings will be required on the web screen as an IP terminal. ■Dataway NEXT - There are no settings for this product. - If the power, connection, and communication green LED lights are all green, it is operating normally. - If communication is not possible in this state, please check the settings of other connected devices. ■Terminal Adapter (TA) - Unplug the power adapter from the outlet and remove the batteries. - Remove the bottom cover of this product. - Check the DSU inside the S/T point unit and the termination resistance settings. *For more details, please download the PDF or feel free to contact us.