Introduction of high-safety casters suitable for rail operation to state-owned railway companies.

Maintain contact with the ground even under difficult conditions! Easily movable with three-wheel casters! The rolling and starting resistance of Blickle wheels is demonstrated.

The state-owned railway company based in Bern, the capital of Switzerland, wanted to continue using efficient casters based on Blickle's RD series. However, the wheel width was narrow, and there were instances where the wheels would drop off the rails when crossing them. Therefore, after discussing the issues and width, and visiting the site to understand the situation, we collaborated with the company to design an appropriate solution and manufactured a bolt-mounted three-wheel caster with a longer wheel axle. The company requested the use of a polyurethane tread "Blickle Softhane" with a heavy-duty specification for the middle wheel, which has low rolling resistance. For the outer two wheels of this wheel (ALST series), we used the Blickle Softhane wheels (RD series) with a two-layer solid rubber tire that has been widely used by SBB and has undergone sufficient trials. This eliminated the difficulties and dangers of crossing the rails, resulting in a cost-effective three-wheel caster. *For more details, please refer to the PDF document or feel free to contact us.*

basic information

【Product Advantages and Technical Information】＜LHD-ALST/RD 160K-933592, BHD-ALST/RD 160K-933599＞ ■ The center wheel uses Blickle Softhane tread made of polyurethane with a load capacity of 550kg, optimized for maneuverability and rolling resistance (hardness: Shore A75°) (ALST series). ■ The two outer wheels are equipped with dual-layer solid rubber tires, each with a load capacity of 225kg (RD series), providing very high operational comfort. ■ The contact surface is enlarged to allow movement over obstacles. ■ The swivel section of the swivel caster uses hardened bearing seats. *For more details, please refer to the PDF document or feel free to contact us.