日東工器 Official site

On-site drilling work has entered the era of cordless! A magnetic application drilling machine equipped with a powerful 36V battery.

【Safety Features】 ■ Plate Thickness Detection Function - Detects the thickness of the workpiece being processed and displays whether the electric drill can be operated. ■ Load Detection Function - Checks the load applied to the electric drill. ■ Body Lift Detection Function - Detects any lifting of the body or decrease in magnetic force during drilling operations. *For more details, please refer to the PDF document or feel free to contact us.

A compact cordless belt sander weighing approximately 1.4 kg that can be operated with one hand! Ideal for job sites where power supply is unavailable!

【Specifications】 ■Battery ・Voltage: DC18V ・Capacity: 2.0Ah ■No-load rotation speed: 7000～17000min-1 ■Belt speed: 460～1120m/min ■Belt dimensions: 10×330mm ■Body weight: 1.4kg (including battery) 【Accessories】 ■Grinding belts Z 　#60×10mm (2 pieces: 1 included with the main unit), #80×10mm (1 piece), 　#100×10mm (1 piece), #120×10mm (1 piece) ■Battery (18V 2.0Ah): 1 piece ※CLB-10 (NN) not included ■Battery cover: 1 piece ※CLB-10 (NN) not included ■Charger: 1 piece ※CLB-10 (NN) not included ■Hexagon wrench 2mm, 4mm: 1 piece each

Choose cordless for chamfering! A powerful rechargeable chamfering machine capable of chamfering 25m on a full charge.

【Specifications】 ● Mini Beveller CLMB-0202 Body weight: 3.9kg (including battery) Battery voltage: DC36V Battery capacity: 2.5Ah Charger input power: AC100V 50/60Hz Charging time: 25min ● Circuit Beveller CLCB-0202 Body weight: 3.4kg (including battery) Battery voltage: DC36V Battery capacity: 2.5Ah Charger input power: AC100V 50/60Hz Charging time: 25min

Lightweight, high-speed rotation, energy-saving! Automation-compatible for unmanned deburring and polishing! *Video available

[Belt Features] ■ The 20mm wide belt is suitable for deburring curved areas. ■ Compatible with commercially available air float attachments. ■ Secure attachment to the robot is possible using screw holes and positioning pins. ■ Grinding of R surfaces using belt deflection is possible with the installation of an offset bracket. *For more details, please refer to the PDF document or feel free to contact us.

One machine can perform 15 types of angle processing! Reducing the work time for formwork creation to one-fourth of the conventional time.

【Specifications】 ■ Power Supply: AC200V Three-phase 50/60Hz ■ Rated Output: 2.2kW ■ Rated Current: 9.5A ■ Maximum Operating Pressure: 68.65MPa ■ Maximum Pressing Force: 490kN (50tf) ■ Maximum Processing Angle Material: SS400 75×75×9mm SUS304 75×75×6mm ■ No-load Stroke Time: Approximately 3.5 seconds (one way) ■ Main Unit Weight: Approximately 800kg ■ Main Unit Dimensions (L×W×H): 680mm × 800mm × 1,765mm

One driver allows for 30 different torque settings! Two screw tightening modes can be selected, achieving "quality improvement at low speed" and "efficiency at high speed"!

【Other Features】 ■ Three levels of automatic speed variation function ■ Two types of measurement methods (time/motor rotation signal) ■ Capable of displaying 7 colors (at the tip of the driver) ■ Two types of connection ports for external input/output signals (switchable between NPN and PNP, RS-232C) ■ Various settings can be configured from a computer (setup software can be downloaded for free from the website) ■ Built-in screw tightening counter function *For more details, please refer to the PDF document or feel free to contact us.

For high torque tightening of 2.0 to 7.0 N·m! One unit allows for 30 different torque settings and tightening condition configurations, contributing to improved work efficiency.

【Other Features】 ■ Capable of displaying 7 colors (at the tip of the driver) ■ Two types of external input/output signal connection ports (switchable between NPN and PNP, RS-232C) ■ Various settings can be configured from a computer (configuration software can be downloaded for free from the website) ■ Built-in screw tightening counter function

Piping around the molding machine! Compatible with narrow pitches, allowing for the replacement of only the lens part, contributing to cost reduction.

【Specifications (Partial)】 ■ Main body material: Brass ■ Maximum operating pressure: 1.0MPa {10kgf/cm2} ■ Pressure resistance: 1.5MPa {15kgf/cm2} ■ Flow rate range: 0.6 to 6L/min ■ Seal material (indication symbol): Fluoro rubber (FKM) ■ Operating temperature range: +10˚C to +80˚C *For more details, please refer to the PDF document or feel free to contact us.

Built-in vacuum pump eliminates the need for compressed air! Contributes to reducing power consumption in suction transport.

【Specifications】 - Maximum vacuum pressure: -66.6 kPa - Air discharge volume: 7.5 L/min - Rated voltage: DC24V - Power consumption: 14.4 W 【Standard Accessories】*Accessories vary depending on the mounting method to the robot. 1. Our screw-type tool flange - Adapter ring - Flange adapter - Suction pad φ35 (1 piece) - Pad adapter M6 (1 piece) 2. Manual robot hand changer by Cosmech Co., Ltd. - Master cylinder - Tool adapter - Suction pad φ35 (1 piece) - Pad adapter M6 (1 piece) 3. If you have a manual robot hand changer by Cosmech Co., Ltd. - Tool adapter - Suction pad φ35 (1 piece) - Pad adapter M6 (1 piece) 【Optional Items】*Required for connection. Please check the connector pin connection type on the robot body side. - Robot communication cable 1. 8-pin female-to-female (length 300 m) 2. 8-pin female-to-male (length 300 m) 3. 8-pin female-to-bare wire (length 1500 m)

A sliding door closer that opens easily with a small force and closes quietly and securely at your preferred speed!

【Example Specifications】 Model: DSC-CWKS08 Applicable door weight: 30–80kg Applicable door width: 700–1600mm Maximum stroke: 1500mm Closing drive method: Inclined (rail incline) Braking time: 7–11 seconds (at an opening distance of 900mm) Usage category: Wooden fittings Pocket wall storage: Supported