Bush material ultrasonic flaw detection device
The inspection is automatically determined based on specified conditions! Work input and output are manual operations.
The "Bush Material Ultrasonic Testing Device" is an automatic ultrasonic testing device that detects delamination defects in the inner sintered material of bushings. It consists of an ultrasonic testing section, a mechanical section, and an electrical section. The ultrasonic testing section is composed of an ultrasonic tester and a data processing computer, allowing for the setting of testing conditions, as well as saving and reading results. The drive axis is configured with two axes: the X-axis (left and right) and the R-axis (workpiece rotation), both of which are servo-driven for scanning. 【Inspection Specifications】 - Detects delamination of sintered material on the inner surface of cylinders - Fills the holder with water, which has an ultrasonic probe attached, to transmit ultrasound through the test material - Allows inspection without submerging the workpiece - Conducts comprehensive inspection by rotating the workpiece and moving the ultrasonic probe mechanism in the axial direction *For more details, please refer to the PDF document or feel free to contact us.
basic information
【Main Equipment Specifications (Partial)】 ■ Equipment Size - Mechanism Section: Width 1100mm × Depth 700mm × Height 1900mm - Electrical Section: Width 800mm × Depth 400mm × Height 1650mm ■ Ultrasonic Probe: 10MHz (1Ch/Frequency Band: 1MHz to 15MHz/Sensitivity: 0 to 80dB) ■ Power Source/Air Pressure: Supply Voltage AC200V 3-phase/0.4Mpa or more ■ Cycle Time: 60 seconds *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
